X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fxpedite517x.h;h=27bed4b39d8af0533466354fdcd7244c1a9fb4ca;hb=6500ec7a5a2a2a59128dba6f49d9905fc1258811;hp=0d5b1ff41df41af26cce7a951f60bc9b1da25880;hpb=2c45f8040ea1152d2ff0960f96905ca42ac089cd;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h
index 0d5b1ff..27bed4b 100644
--- a/include/configs/xpedite517x.h
+++ b/include/configs/xpedite517x.h
@@ -87,17 +87,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_MEMTEST_END		0x20000000
 #define CONFIG_POST			(CONFIG_SYS_POST_MEMORY |\
 					 CONFIG_SYS_POST_I2C)
-#define I2C_ADDR_LIST			{CONFIG_SYS_I2C_DS1621_ADDR,	\
-					 CONFIG_SYS_I2C_DS4510_ADDR,	\
-					 CONFIG_SYS_I2C_EEPROM_ADDR,	\
-					 CONFIG_SYS_I2C_LM90_ADDR,	\
-					 CONFIG_SYS_I2C_PCA9553_ADDR,	\
-					 CONFIG_SYS_I2C_PCA953X_ADDR0,	\
-					 CONFIG_SYS_I2C_PCA953X_ADDR1,	\
-					 CONFIG_SYS_I2C_PCA953X_ADDR2,	\
-					 CONFIG_SYS_I2C_PCA953X_ADDR3,	\
-					 CONFIG_SYS_I2C_PEX8518_ADDR,	\
-					 CONFIG_SYS_I2C_RTC_ADDR}
 /* The XPedite5170 can host an XMC which has an EEPROM at address 0x50 */
 #define I2C_ADDR_IGNORE_LIST		{0x50}
 
@@ -213,7 +202,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
 #define CONFIG_SYS_BAUDRATE_TABLE	\
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
-#define CONFIG_BAUDRATE			115200
 #define CONFIG_LOADS_ECHO		1	/* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
@@ -233,9 +221,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_I2C_PEX8518_ADDR	0x70
 
 /* I2C DS1631 temperature sensor */
-#define CONFIG_SYS_I2C_DS1621_ADDR	0x48
-#define CONFIG_DTT_DS1621
-#define CONFIG_DTT_SENSORS		{ 0 }
 #define CONFIG_SYS_I2C_LM90_ADDR	0x4c
 
 /* I2C EEPROM - AT24C128B */
@@ -249,10 +234,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_I2C_RTC_ADDR		0x68
 #define CONFIG_SYS_M41T11_BASE_YEAR	2000
 
-/* GPIO/EEPROM/SRAM */
-#define CONFIG_DS4510
-#define CONFIG_SYS_I2C_DS4510_ADDR	0x51
-
 /* GPIO */
 #define CONFIG_PCA953X
 #define CONFIG_SYS_I2C_PCA953X_ADDR0	0x18
@@ -323,7 +304,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  * Networking options
  */
 #define CONFIG_TSEC_ENET		/* tsec ethernet support */
-#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
 #define CONFIG_MII		1	/* MII PHY management */
 #define CONFIG_ETHPRIME		"eTSEC1"
 
@@ -503,17 +483,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 /*
  * Command configuration.
  */
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DS4510
-#define CONFIG_CMD_DS4510_INFO
-#define CONFIG_CMD_DTT
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_PCA953X
-#define CONFIG_CMD_PCA953X_INFO
-#define CONFIG_CMD_PCI
 #define CONFIG_CMD_PCI_ENUM
 #define CONFIG_CMD_REGINFO
 
@@ -543,7 +512,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 /*
  * Environment Configuration
  */
-#define CONFIG_ENV_IS_IN_FLASH	1
 #define CONFIG_ENV_SECT_SIZE	0x20000		/* 128k (one sector) for env */
 #define CONFIG_ENV_SIZE		0x8000
 #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)