X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fxpedite517x.h;h=18e342ad72e44744d243fe112b52d89c663c4843;hb=adad96e60d0eb1bbc4d0b96c89decf385a426e42;hp=14b513f5c2776530cc2042211e932572597639e2;hpb=0defddc851edfc34bcf3c3379fe74b11dc01a493;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h
index 14b513f..18e342a 100644
--- a/include/configs/xpedite517x.h
+++ b/include/configs/xpedite517x.h
@@ -14,7 +14,6 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_MPC86xx		1	/* MPC86xx */
 #define CONFIG_MPC8641		1	/* MPC8641 specific */
 #define CONFIG_XPEDITE5140	1	/* MPC8641HPCN board specific */
 #define CONFIG_SYS_BOARD_NAME	"XPedite5170"
@@ -24,6 +23,7 @@
 #define CONFIG_BAT_RW		1	/* Use common BAT rw code */
 #define CONFIG_HIGH_BATS	1	/* High BATs supported and enabled */
 #define CONFIG_ALTIVEC		1
+#define CONFIG_DISPLAY_BOARDINFO
 
 #define	CONFIG_SYS_TEXT_BASE	0xfff00000
 
@@ -40,7 +40,7 @@
 /*
  * DDR config
  */
-#define CONFIG_FSL_DDR2
+#define CONFIG_SYS_FSL_DDR2
 #define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup */
 #define CONFIG_DDR_SPD
 #define CONFIG_MEM_INIT_VALUE		0xdeadbeef
@@ -137,7 +137,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_NAND_ACTL_CLE 	(1 << 15)	/* C_LA15 */
 #define CONFIG_SYS_NAND_ACTL_NCE	0		/* NCE not controlled by ADDR */
 #define CONFIG_SYS_NAND_ACTL_DELAY	25
-#define CONFIG_SYS_NAND_QUIET_TEST
 #define CONFIG_JFFS2_NAND
 
 /*
@@ -215,7 +214,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  * Serial Port
  */
 #define CONFIG_CONS_INDEX		1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
@@ -228,18 +226,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
 /*
- * Use the HUSH parser
- */
-#define CONFIG_SYS_HUSH_PARSER
-
-/*
- * Pass open firmware flat tree
- */
-#define CONFIG_OF_LIBFDT		1
-#define CONFIG_OF_BOARD_SETUP		1
-#define CONFIG_OF_STDOUT_VIA_ALIAS	1
-
-/*
  * I2C
  */
 #define CONFIG_SYS_I2C
@@ -525,8 +511,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 /*
  * Command configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
@@ -534,15 +518,11 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_CMD_DS4510_INFO
 #define CONFIG_CMD_DTT
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_FLASH
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NAND
-#define CONFIG_CMD_NET
 #define CONFIG_CMD_PCA953X
 #define CONFIG_CMD_PCA953X_INFO
 #define CONFIG_CMD_PCI
@@ -560,14 +540,11 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 #define CONFIG_CMDLINE_EDITING	1		/* Command-line editing */
 #define CONFIG_LOADADDR		0x1000000	/* default location for tftp and bootm */
 #define CONFIG_BOOTDELAY	3		/* -1 disables auto-boot */
 #define CONFIG_PANIC_HANG			/* do not reset board on panic */
 #define CONFIG_PREBOOT				/* enable preboot variable */
-#define CONFIG_FIT		1
-#define CONFIG_FIT_VERBOSE	1
 #define CONFIG_INTEGRITY			/* support booting INTEGRITY OS */
 
 /*