X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fxm250.h;h=497cb9198f8e7c33afdd1456572103ad9e39eed3;hb=25ddd1fb0a2281b182529afbc8fda5de2dc16d96;hp=922eb2c6b01c64807808bc9f4a7e3722eb57e5c6;hpb=3405f38a15eec5092ac47efe0829f10a24491c6e;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/xm250.h b/include/configs/xm250.h
index 922eb2c..497cb91 100644
--- a/include/configs/xm250.h
+++ b/include/configs/xm250.h
@@ -35,6 +35,10 @@
 #define CONFIG_PXA250	       1	/* This is an PXA250 CPU	*/
 #define CONFIG_XM250	       1	/* on a MicroSys XM250 Board	*/
 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
+#define	CONFIG_SYS_TEXT_BASE	0x0
+
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
 
 /*
  * Size of malloc() pool; this lives below the uppermost 128 KiB which are
@@ -42,12 +46,12 @@
  *
  */
 #define CONFIG_SYS_MALLOC_LEN		(256*1024)
-#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
  */
-#define CONFIG_DRIVER_SMC91111
+#define CONFIG_NET_MULTI
+#define CONFIG_SMC91111
 #define CONFIG_SMC91111_BASE		0x04000300
 #undef	CONFIG_SMC91111_EXT_PHY
 #define CONFIG_SMC_USE_32_BIT
@@ -74,6 +78,7 @@
 /*
  * select serial console configuration
  */
+#define CONFIG_PXA_SERIAL
 #define CONFIG_FFUART	       1       /* we use FFUART */
 
 /* allow to overwrite serial and ethaddr */
@@ -169,6 +174,9 @@
 
 #define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define	CONFIG_SYS_INIT_SP_ADDR		(GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1)
+
 /*
  * FLASH and environment organization
  */
@@ -314,9 +322,9 @@
  * Clocks, power control and interrupts
  */
 #define CONFIG_SYS_PSSR_VAL	    0x00000030
-#define CONFIG_SYS_CCCR_VAL	    0x00000161	/* 100 MHz memory, 400 MHz CPU, 400 Turbo  */
-#define CONFIG_SYS_CKEN_VAL	    0x000141ec	/* FFUART and STUART enabled	*/
-#define CONFIG_SYS_ICMR_VAL	    0x00000000	/* No interrupts enabled	*/
+#define CONFIG_SYS_CCCR		    0x00000161	/* 100 MHz memory, 400 MHz CPU, 400 Turbo  */
+#define CONFIG_SYS_CKEN		    0x000141ec	/* FFUART and STUART enabled	*/
+#define CONFIG_SYS_ICMR		    0x00000000	/* No interrupts enabled	*/
 
 /* FIXME
  *
@@ -335,6 +343,8 @@
 #define CONFIG_SYS_MDCNFG_VAL	    0x000009c9
 #define CONFIG_SYS_MDMRS_VAL	    0x00220022
 #define CONFIG_SYS_MDREFR_VAL	    0x000da018	/* Initial setting, individual bits set in lowlevel_init.S */
+#define	CONFIG_SYS_FLYCNFG_VAL		0x00000000
+#define	CONFIG_SYS_SXCNFG_VAL		0x00000000
 
 /*
  * PCMCIA and CF Interfaces (NOT USED, these values from lubbock init)