X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fxilinx_zynqmp.h;h=ed09b7f67e73dc662870a43f1b67b932b662a995;hb=a69fdc7787bfa2f27eed74c2ee58c28ce932d502;hp=9ed8771ff50744e9f67efaa846012be34c2669ac;hpb=cb7ea82059069c6509c26b1f705982c6a919a3fe;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index 9ed8771..ed09b7f 100644
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -49,7 +49,7 @@
 #define COUNTER_FREQUENCY		4000000
 
 /* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 0x400000)
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 0x2000000)
 
 /* Serial setup */
 #if defined(CONFIG_ZYNQMP_DCC)
@@ -73,7 +73,6 @@
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_FS_GENERIC
 #define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_ELF
 #define CONFIG_MP
 
 #define CONFIG_CMD_MII
@@ -108,13 +107,51 @@
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LOAD_ADDR		0x8000000
 
+#if defined(CONFIG_ZYNQMP_USB)
+#define CONFIG_USB_DWC3
+#define CONFIG_USB_DWC3_GADGET
+
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_GADGET_DOWNLOAD
+#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_GADGET_VBUS_DRAW	2
+#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_SYS_DFU_DATA_BUF_SIZE	0x1800000
+#define DFU_DEFAULT_POLL_TIMEOUT	300
+#define CONFIG_USB_FUNCTION_DFU
+#define CONFIG_DFU_RAM
+#define CONFIG_G_DNL_VENDOR_NUM		0x03FD
+#define CONFIG_G_DNL_PRODUCT_NUM	0x0300
+#define CONFIG_G_DNL_MANUFACTURER	"Xilinx"
+#define CONFIG_USB_CABLE_CHECK
+#define CONFIG_CMD_DFU
+#define CONFIG_CMD_THOR_DOWNLOAD
+#define CONFIG_USB_FUNCTION_THOR
+#define CONFIG_THOR_RESET_OFF
+#define DFU_ALT_INFO_RAM \
+	"dfu_ram_info=" \
+	"set dfu_alt_info " \
+	"Image ram 0x200000 0x1800000\\\\;" \
+	"system.dtb ram 0x7000000 0x40000\0" \
+	"dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
+	"thor_ram=run dfu_ram_info && thordown 0 ram 0\0"
+
+#define DFU_ALT_INFO  \
+		DFU_ALT_INFO_RAM
+#endif
+
+#if !defined(DFU_ALT_INFO)
+# define DFU_ALT_INFO
+#endif
+
 /* Initial environment variables */
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"kernel_addr=0x80000\0" \
 	"fdt_addr=0x7000000\0" \
 	"fdt_high=0x10000000\0" \
 	"sdboot=mmcinfo && load mmc 0:0 $fdt_addr system.dtb && " \
-		"load mmc 0:0 $kernel_addr Image && booti $kernel_addr - $fdt_addr\0"
+		"load mmc 0:0 $kernel_addr Image && booti $kernel_addr - $fdt_addr\0" \
+	DFU_ALT_INFO
 
 #define CONFIG_BOOTARGS		"setenv bootargs console=ttyPS0,${baudrate} " \
 				"earlycon=cdns,mmio,0xff000000,${baudrate}n8"
@@ -131,7 +168,6 @@
 /* Monitor Command Prompt */
 /* Console I/O Buffer Size */
 #define CONFIG_SYS_CBSIZE		2048
-#define CONFIG_SYS_PROMPT		"ZynqMP> "
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
 					sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_HUSH_PARSER
@@ -169,6 +205,17 @@
 # define CONFIG_SYS_EEPROM_SIZE			(64 * 1024)
 #endif
 
+#ifdef CONFIG_AHCI
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
+#define CONFIG_SYS_SCSI_MAX_LUN		1
+#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+					 CONFIG_SYS_SCSI_MAX_LUN)
+#define CONFIG_CMD_SCSI
+#endif
+
 #define CONFIG_FIT
 #define CONFIG_FIT_VERBOSE       /* enable fit_format_{error,warning}() */