X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fxilinx_zynqmp.h;h=c7fcd86dd5cc091c6b358c501ced479bf8d0331c;hb=8d3a25685e4aac7070365a2b3c53c2c81b27930f;hp=4759373e51f5b6e10b4a01d81485d9fa4fdb8cef;hpb=08aa0334c6e885491c6d10fa4a8209b8917fbf63;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index 4759373..c7fcd86 100644
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -15,8 +15,6 @@
 
 /* #define CONFIG_ARMV8_SWITCH_TO_EL1 */
 
-#define CONFIG_SYS_NO_FLASH
-
 /* Generic Interrupt Controller Definitions */
 #define CONFIG_GICV2
 #define GICD_BASE	0xF9010000
@@ -31,9 +29,6 @@
 #define CONFIG_SYS_MEMTEST_START	0
 #define CONFIG_SYS_MEMTEST_END		1000
 
-/* Have release address at the end of 256MB for now */
-#define CPU_RELEASE_ADDR	0xFFFFFF0
-
 #define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SYS_TEXT_BASE
 
 /* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
@@ -50,12 +45,10 @@
 #define CONFIG_ZYNQ_SERIAL
 
 #define CONFIG_CONS_INDEX		0
-#define CONFIG_BAUDRATE			115200
 #define CONFIG_SYS_BAUDRATE_TABLE \
 	{ 4800, 9600, 19200, 38400, 57600, 115200 }
 
 /* Command line configuration */
-#define CONFIG_CMD_ENV
 #define CONFIG_MP
 
 /* BOOTP options */
@@ -86,10 +79,6 @@
 # define FAT_ENV_INTERFACE		"mmc"
 #endif
 
-#if defined(CONFIG_MMC_SDHCI_ZYNQ) || defined(CONFIG_ZYNQMP_USB)
-# define CONFIG_FAT_WRITE
-#endif
-
 #ifdef CONFIG_NAND_ARASAN
 # define CONFIG_CMD_NAND_LOCK_UNLOCK
 # define CONFIG_SYS_MAX_NAND_DEVICE	1
@@ -187,7 +176,6 @@
 
 /* EEPROM */
 #ifdef CONFIG_ZYNQMP_EEPROM
-# define CONFIG_CMD_EEPROM
 # define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
 # define CONFIG_SYS_I2C_EEPROM_ADDR		0x54
 # define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
@@ -202,13 +190,10 @@
 #define CONFIG_SYS_SCSI_MAX_LUN		1
 #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 					 CONFIG_SYS_SCSI_MAX_LUN)
-#define CONFIG_SCSI
 #endif
 
 #define CONFIG_SYS_BOOTM_LEN	(60 * 1024 * 1024)
 
-#define CONFIG_CMD_UNZIP
-
 #define CONFIG_BOARD_EARLY_INIT_R
 #define CONFIG_CLOCKS
 
@@ -276,7 +261,6 @@
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
 
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_BOARD_INIT
 
 /* u-boot is like dtb */
 #define CONFIG_SPL_FS_LOAD_ARGS_NAME	"u-boot.bin"
@@ -304,11 +288,13 @@
 # define CONFIG_ENV_MAX_ENTRIES	10
 
 # define CONFIG_SYS_SPL_MALLOC_START	0x20000000
-# define CONFIG_SYS_SPL_MALLOC_SIZE	0x10000000
+# define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
 
 #ifdef CONFIG_SPL_SYS_MALLOC_SIMPLE
 # error "Disable CONFIG_SPL_SYS_MALLOC_SIMPLE. Full malloc needs to be used"
 #endif
 #endif
 
+#define CONFIG_BOARD_EARLY_INIT_F
+
 #endif /* __XILINX_ZYNQMP_H */