X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fxilinx_zynqmp.h;h=494a7c4b0017345e516f7af08bb740b21b09e16a;hb=3b2d19c838a48350e06d4c12e4d749eec0217f2c;hp=986af2be78199ec8e4399e3fe7048df0c6443141;hpb=f3a0d2c1af630cc09a34c2159aa2dfa12b831762;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index 986af2b..494a7c4 100644
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -10,12 +10,7 @@
 #ifndef __XILINX_ZYNQMP_H
 #define __XILINX_ZYNQMP_H
 
-#define CONFIG_REMAKE_ELF
-
-/* #define CONFIG_ARMV8_SWITCH_TO_EL1 */
-
 /* Generic Interrupt Controller Definitions */
-#define CONFIG_GICV2
 #define GICD_BASE	0xF9010000
 #define GICC_BASE	0xF9020000
 
@@ -26,33 +21,17 @@
 # define COUNTER_FREQUENCY		100000000
 #endif
 
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 0x4000000)
-
 /* Serial setup */
-#define CONFIG_CPU_ARMV8
-
 #define CONFIG_SYS_BAUDRATE_TABLE \
 	{ 4800, 9600, 19200, 38400, 57600, 115200 }
 
-/* BOOTP options */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_MAY_FAIL
-
 #ifdef CONFIG_NAND_ARASAN
 # define CONFIG_SYS_MAX_NAND_DEVICE	1
-# define CONFIG_SYS_NAND_ONFI_DETECTION
-#endif
-
-#if defined(CONFIG_SPL_BUILD)
-#define CONFIG_ZYNQMP_PSU_INIT_ENABLED
 #endif
 
 /* Miscellaneous configurable options */
-#define CONFIG_SYS_LOAD_ADDR		0x8000000
 
 #if defined(CONFIG_ZYNQMP_USB)
-#define CONFIG_SYS_DFU_DATA_BUF_SIZE	0x1800000
 #define DFU_DEFAULT_POLL_TIMEOUT	300
 #define CONFIG_THOR_RESET_OFF
 
@@ -76,7 +55,6 @@
 
 /* Ethernet driver */
 #if defined(CONFIG_ZYNQ_GEM)
-# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 # define PHY_ANEG_TIMEOUT       20000
 #endif
 
@@ -90,6 +68,8 @@
 	"pxefile_addr_r=0x10000000\0" \
 	"kernel_addr_r=0x18000000\0" \
 	"kernel_size_r=0x10000000\0" \
+	"kernel_comp_addr_r=0x30000000\0" \
+	"kernel_comp_size=0x3C00000\0" \
 	"scriptaddr=0x20000000\0" \
 	"ramdisk_addr_r=0x02100000\0" \
 	"script_size_f=0x80000\0" \
@@ -247,7 +227,6 @@
 #ifdef CONFIG_MMC_SDHCI_ZYNQ
 # define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0 /* unused */
 # define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	0 /* unused */
-# define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0 /* unused */
 # if defined(CONFIG_SPL_LOAD_FIT)
 #  define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.itb"
 # else
@@ -256,13 +235,12 @@
 #endif
 
 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU)
-# define CONFIG_SPL_ENV_SUPPORT
-# define CONFIG_SPL_HASH_SUPPORT
+# define CONFIG_SPL_HASH
 # define CONFIG_ENV_MAX_ENTRIES	10
 #endif
 
 #define CONFIG_SYS_SPL_MALLOC_START	0x20000000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
+#define CONFIG_SYS_SPL_MALLOC_SIZE	0x1000000
 
 #ifdef CONFIG_SPL_SYS_MALLOC_SIMPLE
 # error "Disable CONFIG_SPL_SYS_MALLOC_SIMPLE. Full malloc needs to be used"