X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fxilinx_zynqmp.h;h=363c2924f0a88703442659b4dba3c2b21250c40d;hb=8f1a80e99e4a838d1540cdb1d59ccc7785fe4618;hp=9a1ef9b9835533ef6683bbe70b8941085f5a7b23;hpb=bd42a94268b165a6f298b9ab13be7003e8d96b02;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index 9a1ef9b..363c292 100644
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -15,8 +15,6 @@
 
 /* #define CONFIG_ARMV8_SWITCH_TO_EL1 */
 
-#define CONFIG_SYS_NO_FLASH
-
 /* Generic Interrupt Controller Definitions */
 #define CONFIG_GICV2
 #define GICD_BASE	0xF9010000
@@ -31,9 +29,6 @@
 #define CONFIG_SYS_MEMTEST_START	0
 #define CONFIG_SYS_MEMTEST_END		1000
 
-/* Have release address at the end of 256MB for now */
-#define CPU_RELEASE_ADDR	0xFFFFFF0
-
 #define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SYS_TEXT_BASE
 
 /* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
@@ -50,12 +45,10 @@
 #define CONFIG_ZYNQ_SERIAL
 
 #define CONFIG_CONS_INDEX		0
-#define CONFIG_BAUDRATE			115200
 #define CONFIG_SYS_BAUDRATE_TABLE \
 	{ 4800, 9600, 19200, 38400, 57600, 115200 }
 
 /* Command line configuration */
-#define CONFIG_CMD_ENV
 #define CONFIG_MP
 
 /* BOOTP options */
@@ -75,24 +68,14 @@
 #endif
 #define CONFIG_AUTO_COMPLETE
 
-#if defined(CONFIG_ZYNQ_SDHCI)
-# define CONFIG_GENERIC_MMC
+#if defined(CONFIG_MMC_SDHCI_ZYNQ)
 # define CONFIG_SUPPORT_EMMC_BOOT
 # ifndef CONFIG_ZYNQ_SDHCI_MAX_FREQ
 #  define CONFIG_ZYNQ_SDHCI_MAX_FREQ	200000000
 # endif
-# define CONFIG_ENV_IS_IN_FAT
-# define FAT_ENV_DEVICE_AND_PART	"0:auto"
-# define FAT_ENV_FILE			"uboot.env"
-# define FAT_ENV_INTERFACE		"mmc"
-#endif
-
-#if defined(CONFIG_ZYNQ_SDHCI) || defined(CONFIG_ZYNQMP_USB)
-# define CONFIG_FAT_WRITE
 #endif
 
 #ifdef CONFIG_NAND_ARASAN
-# define CONFIG_CMD_NAND_LOCK_UNLOCK
 # define CONFIG_SYS_MAX_NAND_DEVICE	1
 # define CONFIG_SYS_NAND_SELF_INIT
 # define CONFIG_SYS_NAND_ONFI_DETECTION
@@ -103,8 +86,6 @@
 #define CONFIG_SYS_LOAD_ADDR		0x8000000
 
 #if defined(CONFIG_ZYNQMP_USB)
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
-
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE	0x1800000
 #define DFU_DEFAULT_POLL_TIMEOUT	300
 #define CONFIG_USB_CABLE_CHECK
@@ -129,11 +110,9 @@
 # define CONFIG_FASTBOOT_BUF_ADDR 0x100000
 # define CONFIG_FASTBOOT_BUF_SIZE 0x6000000
 # define CONFIG_FASTBOOT_FLASH
-# ifdef CONFIG_ZYNQ_SDHCI
+# ifdef CONFIG_MMC_SDHCI_ZYNQ
 #  define CONFIG_FASTBOOT_FLASH_MMC_DEV 0
 # endif
-# define CONFIG_PARTITION_UUIDS
-# define CONFIG_CMD_GPT
 
 # define CONFIG_RANDOM_UUID
 # define PARTS_DEFAULT \
@@ -152,9 +131,6 @@
 #endif
 
 /* Do not preserve environment */
-#if !defined(CONFIG_ENV_IS_IN_FAT)
-#define CONFIG_ENV_IS_NOWHERE		1
-#endif
 #define CONFIG_ENV_SIZE			0x8000
 
 /* Monitor Command Prompt */
@@ -190,7 +166,6 @@
 
 /* EEPROM */
 #ifdef CONFIG_ZYNQMP_EEPROM
-# define CONFIG_CMD_EEPROM
 # define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
 # define CONFIG_SYS_I2C_EEPROM_ADDR		0x54
 # define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
@@ -205,13 +180,10 @@
 #define CONFIG_SYS_SCSI_MAX_LUN		1
 #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 					 CONFIG_SYS_SCSI_MAX_LUN)
-#define CONFIG_SCSI
 #endif
 
 #define CONFIG_SYS_BOOTM_LEN	(60 * 1024 * 1024)
 
-#define CONFIG_CMD_UNZIP
-
 #define CONFIG_BOARD_EARLY_INIT_R
 #define CONFIG_CLOCKS
 
@@ -224,7 +196,7 @@
 	"scriptaddr=0x02000000\0" \
 	"ramdisk_addr_r=0x02100000\0" \
 
-#if defined(CONFIG_ZYNQ_SDHCI)
+#if defined(CONFIG_MMC_SDHCI_ZYNQ)
 # define BOOT_TARGET_DEVICES_MMC(func)	func(MMC, mmc, 0) func(MMC, mmc, 1)
 #else
 # define BOOT_TARGET_DEVICES_MMC(func)
@@ -279,7 +251,6 @@
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
 
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_BOARD_INIT
 
 /* u-boot is like dtb */
 #define CONFIG_SPL_FS_LOAD_ARGS_NAME	"u-boot.bin"
@@ -292,7 +263,7 @@
 #define CONFIG_SPL_LOAD_FIT_ADDRESS	0x10000000
 
 /* MMC support */
-#ifdef CONFIG_ZYNQ_SDHCI
+#ifdef CONFIG_MMC_SDHCI_ZYNQ
 # define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 # define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0 /* unused */
 # define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	0 /* unused */
@@ -307,11 +278,13 @@
 # define CONFIG_ENV_MAX_ENTRIES	10
 
 # define CONFIG_SYS_SPL_MALLOC_START	0x20000000
-# define CONFIG_SYS_SPL_MALLOC_SIZE	0x10000000
+# define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
 
 #ifdef CONFIG_SPL_SYS_MALLOC_SIMPLE
 # error "Disable CONFIG_SPL_SYS_MALLOC_SIMPLE. Full malloc needs to be used"
 #endif
 #endif
 
+#define CONFIG_BOARD_EARLY_INIT_F
+
 #endif /* __XILINX_ZYNQMP_H */