X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fxilinx_zynqmp.h;h=0ab32611cee9bc71f4215fbf44f6b8c6ac35f735;hb=0223462b373b975d970fa86e5e1a7eadd1d41820;hp=52baa42a2f11aed8861053c63898ca04e557888f;hpb=4bafceff0e9e5a36908031e41c69a6b37e82da58;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index 52baa42..0ab3261 100644
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -1,11 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Configuration for Xilinx ZynqMP
  * (C) Copyright 2014 - 2015 Xilinx, Inc.
  * Michal Simek <michal.simek@xilinx.com>
  *
  * Based on Configuration for Versatile Express
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __XILINX_ZYNQMP_H
@@ -20,12 +19,10 @@
 #define GICD_BASE	0xF9010000
 #define GICC_BASE	0xF9020000
 
-#define CONFIG_SYS_ALT_MEMTEST
-#define CONFIG_SYS_MEMTEST_SCRATCH	0xfffc0000
-
-#ifndef CONFIG_NR_DRAM_BANKS
-# define CONFIG_NR_DRAM_BANKS		2
+#ifndef CONFIG_SYS_MEMTEST_SCRATCH
+# define CONFIG_SYS_MEMTEST_SCRATCH	0x10800000
 #endif
+
 #define CONFIG_SYS_MEMTEST_START	0
 #define CONFIG_SYS_MEMTEST_END		1000
 
@@ -43,28 +40,20 @@
 #define CONFIG_ARM_DCC
 #define CONFIG_CPU_ARMV8
 
-#define CONFIG_CONS_INDEX		0
 #define CONFIG_SYS_BAUDRATE_TABLE \
 	{ 4800, 9600, 19200, 38400, 57600, 115200 }
 
-/* Command line configuration */
-#define CONFIG_MP
-
 /* BOOTP options */
 #define CONFIG_BOOTP_BOOTFILESIZE
 #define CONFIG_BOOTP_MAY_FAIL
 
 #if defined(CONFIG_MMC_SDHCI_ZYNQ)
 # define CONFIG_SUPPORT_EMMC_BOOT
-# ifndef CONFIG_ZYNQ_SDHCI_MAX_FREQ
-#  define CONFIG_ZYNQ_SDHCI_MAX_FREQ	200000000
-# endif
 #endif
 
 #ifdef CONFIG_NAND_ARASAN
 # define CONFIG_SYS_MAX_NAND_DEVICE	1
 # define CONFIG_SYS_NAND_ONFI_DETECTION
-# define CONFIG_MTD_DEVICE
 #endif
 
 #if defined(CONFIG_SPL_BUILD)
@@ -106,9 +95,6 @@
 # define PARTS_DEFAULT
 #endif
 
-/* Do not preserve environment */
-#define CONFIG_ENV_SIZE			0x8000
-
 /* Monitor Command Prompt */
 /* Console I/O Buffer Size */
 #define CONFIG_SYS_CBSIZE		2048
@@ -118,7 +104,6 @@
 
 /* Ethernet driver */
 #if defined(CONFIG_ZYNQ_GEM)
-# define CONFIG_MII
 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 # define PHY_ANEG_TIMEOUT       20000
 #endif
@@ -126,8 +111,6 @@
 /* I2C */
 #if defined(CONFIG_SYS_I2C_ZYNQ)
 # define CONFIG_SYS_I2C
-# define CONFIG_SYS_I2C_ZYNQ_SPEED		100000
-# define CONFIG_SYS_I2C_ZYNQ_SLAVE		0
 #endif
 
 /* EEPROM */
@@ -139,16 +122,8 @@
 # define CONFIG_SYS_EEPROM_SIZE			(64 * 1024)
 #endif
 
-#ifdef CONFIG_SATA_CEVA
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID	2
-#define CONFIG_SYS_SCSI_MAX_LUN		1
-#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-					 CONFIG_SYS_SCSI_MAX_LUN)
-#endif
-
 #define CONFIG_SYS_BOOTM_LEN	(60 * 1024 * 1024)
 
-#define CONFIG_BOARD_EARLY_INIT_R
 #define CONFIG_CLOCKS
 
 #define ENV_MEM_LAYOUT_SETTINGS \
@@ -178,12 +153,24 @@
 # define BOOT_TARGET_DEVICES_USB(func)
 #endif
 
+#if defined(CONFIG_CMD_PXE) && defined(CONFIG_CMD_DHCP)
+# define BOOT_TARGET_DEVICES_PXE(func)	func(PXE, pxe, na)
+#else
+# define BOOT_TARGET_DEVICES_PXE(func)
+#endif
+
+#if defined(CONFIG_CMD_DHCP)
+# define BOOT_TARGET_DEVICES_DHCP(func)	func(DHCP, dhcp, na)
+#else
+# define BOOT_TARGET_DEVICES_DHCP(func)
+#endif
+
 #define BOOT_TARGET_DEVICES(func) \
 	BOOT_TARGET_DEVICES_MMC(func) \
 	BOOT_TARGET_DEVICES_USB(func) \
 	BOOT_TARGET_DEVICES_SCSI(func) \
-	func(PXE, pxe, na) \
-	func(DHCP, dhcp, na)
+	BOOT_TARGET_DEVICES_PXE(func) \
+	BOOT_TARGET_DEVICES_DHCP(func)
 
 #include <config_distro_bootcmd.h>
 
@@ -215,7 +202,6 @@
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
 
 #if defined(CONFIG_SPL_SPI_FLASH_SUPPORT)
-# define CONFIG_SPL_SPI_LOAD
 # define CONFIG_SYS_SPI_KERNEL_OFFS	0x80000
 # define CONFIG_SYS_SPI_ARGS_OFFS	0xa0000
 # define CONFIG_SYS_SPI_ARGS_SIZE	0xa0000