X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fxaeniax.h;h=e399e95019a0c9cea03bbef05a62b5629341963a;hb=3d6ba91e793808d1612152e9f9b8c51b3ca6c926;hp=a75c426dfa21e32324bccafebb253a2bf5fae723;hpb=d963e84c92a63b4e6c4f2f80482a5ecbe9b24fe0;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h
index a75c426..e399e95 100644
--- a/include/configs/xaeniax.h
+++ b/include/configs/xaeniax.h
@@ -40,18 +40,14 @@
  * High Level Configuration Options
  * (easy to change)
  */
-#define CONFIG_PXA250		1	/* This is an PXA255 CPU    */
+#define CONFIG_CPU_PXA25X		1	/* This is an PXA255 CPU    */
 #define CONFIG_XAENIAX		1	/* on a xaeniax board	    */
 #define	CONFIG_SYS_TEXT_BASE	0x0
 
-
-#define BOARD_LATE_INIT		1
-
-
-#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
+#define CONFIG_BOARD_LATE_INIT
 
 /* we will never enable dcache, because we have to setup MMU first */
-#define CONFIG_SYS_NO_DCACHE
+#define CONFIG_SYS_DCACHE_OFF
 
 /*
  * select serial console configuration
@@ -67,9 +63,6 @@
 
 #define CONFIG_BAUDRATE		115200
 
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 } /* valid baudrates */
-
-
 /*
  * BOOTP options
  */
@@ -122,7 +115,6 @@
 #define CONFIG_SYS_LONGHELP				/* undef to save memory	*/
 #define CONFIG_SYS_HUSH_PARSER		1
 
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 #ifdef CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_PROMPT		"u-boot$ "	/* Monitor Command Prompt */
@@ -168,7 +160,7 @@
 #define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define	CONFIG_SYS_INIT_SP_ADDR		(GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1)
+#define	CONFIG_SYS_INIT_SP_ADDR		0xfffff800
 
 /*
  * FLASH and environment organization
@@ -186,20 +178,8 @@
 #define CONFIG_ENV_SIZE		0x40000			/* Total Size of Environment Sector	*/
 
 /*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
-#endif
-
-/*
  * SMSC91C111 Network Card
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC91111		1
 #define CONFIG_SMC91111_BASE		0x10000300  /* chip select 3         */
 #define CONFIG_SMC_USE_32_BIT		1          /* 32 bit bus  */