X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fxaeniax.h;h=2999d1b0f54ddd55e7473c83878c6644aec296f6;hb=746667f1e56bf08d03e66a178df3c4f4f6c806e1;hp=941f80cb974daae8c6ce29e40f3386c3461bdfb0;hpb=c786f54b9ace5d7b20a0404a7deb1bae683cd4e8;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h
index 941f80c..2999d1b 100644
--- a/include/configs/xaeniax.h
+++ b/include/configs/xaeniax.h
@@ -14,23 +14,7 @@
  *
  * Configuation settings for the xaeniax board.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -44,12 +28,8 @@
 #define CONFIG_XAENIAX		1	/* on a xaeniax board	    */
 #define	CONFIG_SYS_TEXT_BASE	0x0
 
-
 #define CONFIG_BOARD_LATE_INIT
 
-
-#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
-
 /* we will never enable dcache, because we have to setup MMU first */
 #define CONFIG_SYS_DCACHE_OFF
 
@@ -58,7 +38,7 @@
  */
 #define CONFIG_PXA_SERIAL
 #define CONFIG_BTUART	       1       /* we use BTUART on XAENIAX */
-
+#define CONFIG_CONS_INDEX	4
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
@@ -67,9 +47,6 @@
 
 #define CONFIG_BAUDRATE		115200
 
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 } /* valid baudrates */
-
-
 /*
  * BOOTP options
  */
@@ -107,7 +84,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	115200			/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	1			/* which serial port to use */
 #endif
 
 /*
@@ -122,7 +98,6 @@
 #define CONFIG_SYS_LONGHELP				/* undef to save memory	*/
 #define CONFIG_SYS_HUSH_PARSER		1
 
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 #ifdef CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_PROMPT		"u-boot$ "	/* Monitor Command Prompt */
@@ -140,7 +115,6 @@
 
 #define CONFIG_SYS_LOAD_ADDR		0xa1000000	/* default load address */
 
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_CPUSPEED		0x141		/* set core clock to 400/200/100 MHz */
 
 /*
@@ -186,17 +160,6 @@
 #define CONFIG_ENV_SIZE		0x40000			/* Total Size of Environment Sector	*/
 
 /*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
-#endif
-
-/*
  * SMSC91C111 Network Card
  */
 #define CONFIG_SMC91111		1