X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fx600.h;h=a8435d8b0147d8bb9bf950b5dd618d512196270c;hb=8f1a80e99e4a838d1540cdb1d59ccc7785fe4618;hp=58f1aca9a028c02e7fc271cec48056f02fd3f45c;hpb=e4aa8edb6e5cae256a5c5a3c5cd30e05e8f5a2b4;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/x600.h b/include/configs/x600.h
index 58f1aca..a8435d8 100644
--- a/include/configs/x600.h
+++ b/include/configs/x600.h
@@ -16,7 +16,6 @@
  */
 #define CONFIG_SPEAR600				/* SPEAr600 SoC */
 #define CONFIG_X600				/* on X600 board */
-#define CONFIG_SYS_THUMB_BUILD
 
 #include <asm/arch/hardware.h>
 
@@ -34,8 +33,6 @@
 #define CONFIG_SYS_MONITOR_BASE			CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_MONITOR_LEN			0x60000
 
-#define CONFIG_ENV_IS_IN_FLASH
-
 /* Serial Configuration (PL011) */
 #define CONFIG_SYS_SERIAL0			0xD0000000
 #define CONFIG_SYS_SERIAL1			0xD0080000
@@ -44,7 +41,6 @@
 #define CONFIG_PL011_SERIAL
 #define CONFIG_PL011_CLOCK			(48 * 1000 * 1000)
 #define CONFIG_CONS_INDEX			0
-#define CONFIG_BAUDRATE				115200
 #define CONFIG_SYS_BAUDRATE_TABLE		{ 9600, 19200, 38400, \
 						  57600, 115200 }
 #define CONFIG_SYS_LOADS_BAUD_CHANGE
@@ -73,20 +69,19 @@
 /* UBI/UBI config options */
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
-#define CONFIG_RBTREE
 
 /* Ethernet config options */
 #define CONFIG_MII
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_RESET_DELAY			10000		/* in usec */
 #define CONFIG_PHY_ADDR		0	/* PHY address */
 #define CONFIG_PHY_GIGE			/* Include GbE speed/duplex detection */
+#define CONFIG_PHY_MICREL
+#define CONFIG_PHY_MICREL_KSZ9031
 
 #define CONFIG_SPEAR_GPIO
 
 /* I2C config options */
 #define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_DW
 #define CONFIG_SYS_I2C_BASE			0xD0200000
 #define CONFIG_SYS_I2C_SPEED			400000
 #define CONFIG_SYS_I2C_SLAVE			0x02
@@ -102,40 +97,17 @@
 #define CONFIG_FPGA_COUNT	1
 
 /* USB EHCI options */
-#define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_SPEAR
-#define CONFIG_USB_STORAGE
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	2
 
 /*
  * Command support defines
  */
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_FPGA_LOADMK
-#define CONFIG_CMD_FS_GENERIC
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_SAVES
-#define CONFIG_CMD_UBI
-#define CONFIG_CMD_UBIFS
-#define CONFIG_CMD_USB
-#define CONFIG_LZO
 
 /* Filesystem support (for USB key) */
 #define CONFIG_SUPPORT_VFAT
-#define CONFIG_DOS_PARTITION
-
-#define CONFIG_BOOTDELAY			3
 
-#define CONFIG_SYS_HUSH_PARSER			/* Use the HUSH parser	*/
-#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 /*
  * U-Boot Environment placing definitions.
@@ -150,21 +122,15 @@
 
 /* Miscellaneous configurable options */
 #define CONFIG_ARCH_CPU_INIT
-#define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_BOOT_PARAMS_ADDR			0x00000100
 #define CONFIG_CMDLINE_TAG
-#define CONFIG_OF_LIBFDT		/* enable passing of devicetree */
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_MISC_INIT_R
-#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_LOOPW			/* enable loopw command         */
 #define CONFIG_MX_CYCLIC		/* enable mdc/mwc commands      */
-#define CONFIG_ZERO_BOOTDELAY_CHECK
 
 #define CONFIG_SYS_MEMTEST_START		0x00800000
 #define CONFIG_SYS_MEMTEST_END			0x04000000
 #define CONFIG_SYS_MALLOC_LEN			(8 << 20)
-#define CONFIG_IDENT_STRING			"-SPEAr"
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_AUTO_COMPLETE
@@ -174,7 +140,6 @@
 #define CONFIG_SYS_MAXARGS			16
 #define CONFIG_SYS_BARGSIZE			CONFIG_SYS_CBSIZE
 #define CONFIG_SYS_LOAD_ADDR			0x00800000
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
 
 /* Use last 2 lwords in internal SRAM for bootcounter */
 #define CONFIG_BOOTCOUNT_LIMIT
@@ -283,10 +248,6 @@
 #define CONFIG_SPL_LDSCRIPT	"arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds"
 
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_NOR_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT	/* image.c */
-#define CONFIG_SPL_LIBGENERIC_SUPPORT	/* string.c */
 
 /*
  * Please select/define only one of the following