X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fx600.h;h=4af6b67f9e88dcf648be99ad823170edc921fd05;hb=12f05678e157ef4472b4e3611bb7ae9751487ff0;hp=58f1aca9a028c02e7fc271cec48056f02fd3f45c;hpb=9ef671c9d4c70af3f8b21d8a31a89af4dc74d6b3;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/x600.h b/include/configs/x600.h
index 58f1aca..4af6b67 100644
--- a/include/configs/x600.h
+++ b/include/configs/x600.h
@@ -77,16 +77,16 @@
 
 /* Ethernet config options */
 #define CONFIG_MII
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_RESET_DELAY			10000		/* in usec */
 #define CONFIG_PHY_ADDR		0	/* PHY address */
 #define CONFIG_PHY_GIGE			/* Include GbE speed/duplex detection */
+#define CONFIG_PHY_MICREL
+#define CONFIG_PHY_MICREL_KSZ9031
 
 #define CONFIG_SPEAR_GPIO
 
 /* I2C config options */
 #define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_DW
 #define CONFIG_SYS_I2C_BASE			0xD0200000
 #define CONFIG_SYS_I2C_SPEED			400000
 #define CONFIG_SYS_I2C_SLAVE			0x02
@@ -104,38 +104,25 @@
 /* USB EHCI options */
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_SPEAR
-#define CONFIG_USB_STORAGE
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	2
 
 /*
  * Command support defines
  */
-#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_ENV
-#define CONFIG_CMD_FAT
 #define CONFIG_CMD_FPGA_LOADMK
-#define CONFIG_CMD_FS_GENERIC
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_CMD_NAND
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_SAVES
 #define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
-#define CONFIG_CMD_USB
 #define CONFIG_LZO
 
 /* Filesystem support (for USB key) */
 #define CONFIG_SUPPORT_VFAT
 #define CONFIG_DOS_PARTITION
 
-#define CONFIG_BOOTDELAY			3
-
-#define CONFIG_SYS_HUSH_PARSER			/* Use the HUSH parser	*/
-#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 /*
  * U-Boot Environment placing definitions.
@@ -153,13 +140,10 @@
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_BOOT_PARAMS_ADDR			0x00000100
 #define CONFIG_CMDLINE_TAG
-#define CONFIG_OF_LIBFDT		/* enable passing of devicetree */
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_MISC_INIT_R
 #define CONFIG_BOARD_LATE_INIT
-#define CONFIG_LOOPW			/* enable loopw command         */
 #define CONFIG_MX_CYCLIC		/* enable mdc/mwc commands      */
-#define CONFIG_ZERO_BOOTDELAY_CHECK
 
 #define CONFIG_SYS_MEMTEST_START		0x00800000
 #define CONFIG_SYS_MEMTEST_END			0x04000000