X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fx600.h;h=0dd57227948b99a8f538025efc5f58c8a883ba62;hb=35bd70c5107f0cfa610b5c7074a7ee2a60d5d82f;hp=bfa6f5e3fb85f42ee415f6a7bdbb4dc5103d3885;hpb=77bba970e2372b01156c66585db3d6fc751c7178;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/x600.h b/include/configs/x600.h
index bfa6f5e..0dd5722 100644
--- a/include/configs/x600.h
+++ b/include/configs/x600.h
@@ -1,10 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2009, STMicroelectronics - All Rights Reserved
  * Author(s): Vipin Kumar, <vipin.kumar@st.com> for STMicroelectronics.
  *
  * Copyright (C) 2012, 2015 Stefan Roese <sr@denx.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -28,7 +27,6 @@
 #define CONFIG_SYS_SPL_LEN			CONFIG_SPL_PAD_TO
 #define CONFIG_SYS_UBOOT_BASE			(CONFIG_SYS_FLASH_BASE + \
 						 CONFIG_SYS_SPL_LEN)
-#define CONFIG_SYS_UBOOT_START			CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_MONITOR_BASE			CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_MONITOR_LEN			0x60000
 
@@ -38,7 +36,6 @@
 #define CONFIG_PL01x_PORTS			{ (void *)CONFIG_SYS_SERIAL0, \
 						(void *)CONFIG_SYS_SERIAL1 }
 #define CONFIG_PL011_CLOCK			(48 * 1000 * 1000)
-#define CONFIG_CONS_INDEX			0
 #define CONFIG_SYS_BAUDRATE_TABLE		{ 9600, 19200, 38400, \
 						  57600, 115200 }
 #define CONFIG_SYS_LOADS_BAUD_CHANGE
@@ -64,13 +61,9 @@
 #define CONFIG_NAND_ECC_BCH
 
 /* UBI/UBI config options */
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
 
 /* Ethernet config options */
-#define CONFIG_MII
 #define CONFIG_PHY_RESET_DELAY			10000		/* in usec */
-#define CONFIG_PHY_ADDR		0	/* PHY address */
 
 #define CONFIG_SPEAR_GPIO
 
@@ -81,7 +74,6 @@
 #define CONFIG_SYS_I2C_SLAVE			0x02
 #define CONFIG_I2C_CHIPADDRESS			0x50
 
-#define CONFIG_RTC_M41T62	1
 #define CONFIG_SYS_I2C_RTC_ADDR	0x68
 
 /* FPGA config options */
@@ -94,34 +86,22 @@
 /*
  * U-Boot Environment placing definitions.
  */
-#define CONFIG_ENV_SECT_SIZE			0x00010000
-#define CONFIG_ENV_ADDR				(CONFIG_SYS_MONITOR_BASE + \
-						 CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_ENV_SIZE				0x02000
-#define CONFIG_ENV_ADDR_REDUND			(CONFIG_ENV_ADDR + \
-						 CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND			(CONFIG_ENV_SIZE)
 
 /* Miscellaneous configurable options */
-#define CONFIG_ARCH_CPU_INIT
 #define CONFIG_BOOT_PARAMS_ADDR			0x00000100
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_MISC_INIT_R
-#define CONFIG_MX_CYCLIC		/* enable mdc/mwc commands      */
 
-#define CONFIG_SYS_MEMTEST_START		0x00800000
-#define CONFIG_SYS_MEMTEST_END			0x04000000
 #define CONFIG_SYS_MALLOC_LEN			(8 << 20)
 #define CONFIG_SYS_LOAD_ADDR			0x00800000
 
-#define CONFIG_HOSTNAME				x600
+#define CONFIG_HOSTNAME				"x600"
 #define CONFIG_UBI_PART				ubi0
 #define CONFIG_UBIFS_VOLUME			rootfs
 
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
 	"u-boot_addr=1000000\0"						\
-	"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.spr\0"		\
+	"u-boot=" CONFIG_HOSTNAME "/u-boot.spr\0"		\
 	"load=tftp ${u-boot_addr} ${u-boot}\0"				\
 	"update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE)	\
 		" +${filesize};"					\
@@ -131,7 +111,7 @@
 		"protect on " __stringify(CONFIG_SYS_MONITOR_BASE)	\
 		" +${filesize}\0"					\
 	"upd=run load update\0"						\
-	"ubifs=" __stringify(CONFIG_HOSTNAME) "/ubifs.img\0"		\
+	"ubifs=" CONFIG_HOSTNAME "/ubifs.img\0"		\
 	"part=" __stringify(CONFIG_UBI_PART) "\0"			\
 	"vol=" __stringify(CONFIG_UBIFS_VOLUME) "\0"			\
 	"load_ubifs=tftp ${kernel_addr} ${ubifs}\0"			\
@@ -156,12 +136,12 @@
 		"saveenv;boot\0"					\
 	"ubifsargs=set bootargs ubi.mtd=ubi${boot_part} "		\
 		"root=ubi0:rootfs rootfstype=ubifs\0"			\
-	"kernel=" __stringify(CONFIG_HOSTNAME) "/uImage\0"		\
+	"kernel=" CONFIG_HOSTNAME "/uImage\0"		\
 	"kernel_fs=/boot/uImage \0"					\
 	"kernel_addr=1000000\0"						\
-	"dtb=" __stringify(CONFIG_HOSTNAME) "/"				\
-		__stringify(CONFIG_HOSTNAME) ".dtb\0"			\
-	"dtb_fs=/boot/" __stringify(CONFIG_HOSTNAME) ".dtb\0"		\
+	"dtb=" CONFIG_HOSTNAME "/"				\
+		CONFIG_HOSTNAME ".dtb\0"			\
+	"dtb_fs=/boot/" CONFIG_HOSTNAME ".dtb\0"		\
 	"dtb_addr=1800000\0"						\
 	"load_kernel=tftp ${kernel_addr} ${kernel}\0"			\
 	"load_dtb=tftp ${dtb_addr} ${dtb}\0"				\
@@ -188,7 +168,6 @@
 	"\0"
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS			1
 #define PHYS_SDRAM_1				0x00000000
 #define PHYS_SDRAM_1_MAXSIZE			0x40000000
 
@@ -208,7 +187,6 @@
 /*
  * SPL related defines
  */
-#define CONFIG_SPL_TEXT_BASE		0xd2800b00
 #define CONFIG_SPL_MAX_SIZE		(CONFIG_SRAM_SIZE - 0xb00)
 #define	CONFIG_SPL_START_S_PATH	"arch/arm/cpu/arm926ejs/spear"