X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fx530.h;h=dee87cb77325d8ba48720cc26f75a179054e280f;hb=65cc0e2a65d2c9f107b2f42db6396d9ade6c5ad8;hp=4446510df4e0454283848e4640c8ab2c08aef959;hpb=50c9b0e1ddce280823484579c4ecc1f069e7833b;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/x530.h b/include/configs/x530.h
index 4446510..dee87cb 100644
--- a/include/configs/x530.h
+++ b/include/configs/x530.h
@@ -10,18 +10,12 @@
  * High Level Configuration Options (easy to change)
  */
 
-#define CONFIG_DISPLAY_BOARDINFO_LATE
-
-#define CONFIG_SYS_TCLK		250000000	/* 250MHz */
-
 /*
  * NS16550 Configuration
  */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_CLK		CONFIG_SYS_TCLK
+#define CFG_SYS_NS16550_CLK		CFG_SYS_TCLK
 #if !defined(CONFIG_DM_SERIAL)
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_COM1		MV_UART_CONSOLE_BASE
+#define CFG_SYS_NS16550_COM1		MV_UART_CONSOLE_BASE
 #endif
 
 /*
@@ -31,8 +25,6 @@
  */
 
 /* NAND */
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
 
 #define BBT_CUSTOM_SCAN
 #define BBT_CUSTOM_SCAN_PAGE 0
@@ -48,56 +40,20 @@
 
 /* Additional FS support/configuration */
 
-/* USB/EHCI configuration */
-#define CONFIG_EHCI_IS_TDI
-
 /* Environment in SPI NOR flash */
 
 #define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
 
-/* PCIe support */
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_PCI_SCAN_SHOW
-#endif
-
 /* NAND */
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-
-#define CONFIG_SYS_MALLOC_LEN		(4 << 20)
 
 #include <asm/arch/config.h>
 
-/*
- * Other required minimal configurations
- */
-#define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
-
 /* Keep device tree and initrd in low memory so the kernel can access them */
 #define CONFIG_EXTRA_ENV_SETTINGS	\
 	"fdt_high=0x10000000\0"		\
 	"initrd_high=0x10000000\0"
 
-#define CONFIG_SYS_LOAD_ADDR	0x1000000
 #define CONFIG_UBI_PART			user
 #define CONFIG_UBIFS_VOLUME		user
 
-/* SPL */
-
-/* Defines for SPL */
-#define CONFIG_SPL_SIZE			(140 << 10)
-#define CONFIG_SPL_MAX_SIZE		(CONFIG_SPL_SIZE - 0x0030)
-
-#define CONFIG_SPL_BSS_START_ADDR	(0x40000000 + CONFIG_SPL_SIZE)
-#define CONFIG_SPL_BSS_MAX_SIZE		(16 << 10)
-
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_MALLOC_SIMPLE
-#endif
-
-#define CONFIG_SPL_STACK		(0x40000000 + ((192 - 16) << 10))
-#define CONFIG_SPL_BOOTROM_SAVE		(CONFIG_SPL_STACK + 4)
-
-/* SPL related SPI defines */
-#define CONFIG_SYS_U_BOOT_OFFS		CONFIG_SYS_SPI_U_BOOT_OFFS
-
 #endif /* _CONFIG_X530_H */