X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fx530.h;h=99531ed319061e53f2d436decc0ae83d574c6c37;hb=d16c9d0b3729b1b120caa1b9836660c3bbcd7b87;hp=a83d49ba356e4f161872583dd35783205d25dd86;hpb=50e24381c097579ff2a8b171838347c82c2fba04;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/x530.h b/include/configs/x530.h
index a83d49b..99531ed 100644
--- a/include/configs/x530.h
+++ b/include/configs/x530.h
@@ -39,7 +39,6 @@
 
 /* NAND */
 #define CONFIG_SYS_NAND_ONFI_DETECTION
-#define CONFIG_SYS_NAND_USE_FLASH_BBT
 #define CONFIG_SYS_MAX_NAND_DEVICE 1
 
 #define BBT_CUSTOM_SCAN
@@ -47,9 +46,6 @@
 #define BBT_CUSTOM_SCAN_POSITION 2048
 
 /* SPI NOR flash default params, used by sf commands */
-#define CONFIG_SF_DEFAULT_BUS		1
-#define CONFIG_SF_DEFAULT_SPEED		50000000
-#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_3
 
 #define MTDIDS_DEFAULT			"nand0=nand"
 #define MTDPARTS_DEFAULT		"mtdparts=nand:240M(user),8M(errlog),8M(nand-bbt)"
@@ -63,14 +59,7 @@
 #define CONFIG_EHCI_IS_TDI
 
 /* Environment in SPI NOR flash */
-#define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
-#define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
-#define CONFIG_ENV_OFFSET		(1 << 20) /* 1MiB in */
-#define CONFIG_ENV_SIZE			(64 << 10) /* 64KiB */
-#define CONFIG_ENV_SECT_SIZE		(256 << 10) /* 256KiB sectors */
-#define CONFIG_ENV_ADDR			CONFIG_ENV_OFFSET
-
-#define CONFIG_PHY_MARVELL		/* there is a marvell phy */
+
 #define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
 
 /* PCIe support */
@@ -79,12 +68,9 @@
 #endif
 
 /* NAND */
-#define CONFIG_SYS_NAND_USE_FLASH_BBT
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
-#define CONFIG_LZO
-#define CONFIG_MTD_DEVICE
 #define CONFIG_CMD_MTDPARTS
 
 #define CONFIG_SYS_MALLOC_LEN		(4 << 20)
@@ -94,11 +80,8 @@
 /*
  * Other required minimal configurations
  */
-#define CONFIG_ARCH_CPU_INIT	/* call arch_cpu_init() */
 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
 
-#define CONFIG_SYS_ALT_MEMTEST
-
 /* Keep device tree and initrd in low memory so the kernel can access them */
 #define CONFIG_EXTRA_ENV_SETTINGS	\
 	"fdt_high=0x10000000\0"		\
@@ -112,7 +95,6 @@
 
 /* Defines for SPL */
 #define CONFIG_SPL_SIZE			(140 << 10)
-#define CONFIG_SPL_TEXT_BASE		0x40000030
 #define CONFIG_SPL_MAX_SIZE		(CONFIG_SPL_SIZE - 0x0030)
 
 #define CONFIG_SPL_BSS_START_ADDR	(0x40000000 + CONFIG_SPL_SIZE)
@@ -126,8 +108,6 @@
 #define CONFIG_SPL_BOOTROM_SAVE		(CONFIG_SPL_STACK + 4)
 
 /* SPL related SPI defines */
-#define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x24000
 #define CONFIG_SYS_U_BOOT_OFFS		CONFIG_SYS_SPI_U_BOOT_OFFS
 
 #endif /* _CONFIG_X530_H */