X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fwork_92105.h;h=dd02142e3243adf4d1a0d6d21fb59d8c0cbd181a;hb=43ade93bdb0c8bd57382be810a05b3793749ce85;hp=15ee28414d3b3024a00368a365dc19d479347da2;hpb=1254ff97abb7606ccd0d7bdcd9f22581c50fe535;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/work_92105.h b/include/configs/work_92105.h
index 15ee284..dd02142 100644
--- a/include/configs/work_92105.h
+++ b/include/configs/work_92105.h
@@ -18,15 +18,13 @@
  * Define work_92105 machine type by hand -- done only for compatibility
  * with original board code
  */
-#define MACH_TYPE_WORK_92105		736
-#define CONFIG_MACH_TYPE		MACH_TYPE_WORK_92105
+#define CONFIG_MACH_TYPE		736
 
 #define CONFIG_SYS_ICACHE_OFF
 #define CONFIG_SYS_DCACHE_OFF
 #if !defined(CONFIG_SPL_BUILD)
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #endif
-#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_EARLY_INIT_R
 
 /* generate LPC32XX-specific SPL image */
@@ -63,9 +61,6 @@
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_ADDR 0
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
 /* FIXME: remove "Waiting for PHY auto negotiation to complete..." message */
 
 /*
@@ -74,7 +69,6 @@
 
 #define CONFIG_SYS_I2C_LPC32XX
 #define CONFIG_SYS_I2C
-#define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C_SPEED 350000
 
 /*
@@ -103,7 +97,6 @@
 /*
  * U-Boot General Configurations
  */
-#define CONFIG_SYS_GENERIC_BOARD
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_SYS_CBSIZE		1024
 #define CONFIG_SYS_PBSIZE		\
@@ -111,13 +104,8 @@
 #define CONFIG_SYS_MAXARGS		16
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
-#define CONFIG_SYS_HUSH_PARSER
-
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_CMDLINE_EDITING
-#define CONFIG_VERSION_VARIABLE
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DOS_PARTITION
 
 /*
  * No NOR
@@ -154,14 +142,12 @@
  * GPIO
  */
 
-#define CONFIG_CMD_GPIO
 #define CONFIG_LPC32XX_GPIO
 
 /*
  * SSP/SPI/DISPLAY
  */
 
-#define CONFIG_CMD_SPI
 #define CONFIG_LPC32XX_SSP
 #define CONFIG_LPC32XX_SSP_TIMEOUT 100000
 #define CONFIG_CMD_MAX6957
@@ -183,9 +169,6 @@
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-#define CONFIG_BOOTDELAY		3
-
 #define CONFIG_BOOTFILE			"uImage"
 #define CONFIG_BOOTARGS			"console=ttyS2,115200n8"
 #define CONFIG_LOADADDR			0x80008000
@@ -201,12 +184,8 @@
 #define CONFIG_SPL_BOARD_INIT
 /* Use the framework and generic lib */
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
 /* SPL will use serial */
-#define CONFIG_SPL_SERIAL_SUPPORT
 /* SPL will load U-Boot from NAND offset 0x40000 */
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_BOOT