X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fwork_92105.h;h=c308f2c1a63dac2911762b80e1d67f2498abbaa9;hb=dd937b82fec0a5f1a077c207c929a1e3d465f59e;hp=eae7ebab0e336b9499b331ed210eddcc2e1d5635;hpb=20a41043fb3985879ec2ce2ef1deddcda7fa4c99;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/work_92105.h b/include/configs/work_92105.h
index eae7eba..c308f2c 100644
--- a/include/configs/work_92105.h
+++ b/include/configs/work_92105.h
@@ -18,15 +18,13 @@
  * Define work_92105 machine type by hand -- done only for compatibility
  * with original board code
  */
-#define MACH_TYPE_WORK_92105		736
-#define CONFIG_MACH_TYPE		MACH_TYPE_WORK_92105
+#define CONFIG_MACH_TYPE		736
 
 #define CONFIG_SYS_ICACHE_OFF
 #define CONFIG_SYS_DCACHE_OFF
 #if !defined(CONFIG_SPL_BUILD)
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #endif
-#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_EARLY_INIT_R
 
 /* generate LPC32XX-specific SPL image */
@@ -52,7 +50,6 @@
  * Serial Driver
  */
 #define CONFIG_SYS_LPC32XX_UART		5   /* UART5 - NS16550 */
-#define CONFIG_BAUDRATE			115200
 
 /*
  * Ethernet Driver
@@ -85,18 +82,9 @@
  * I2C RTC
  */
 
-#define CONFIG_CMD_DATE
 #define CONFIG_RTC_DS1374
 
 /*
- * I2C Temperature Sensor (DTT)
- */
-
-#define CONFIG_CMD_DTT
-#define CONFIG_DTT_SENSORS { 0, 1 }
-#define CONFIG_DTT_DS620
-
-/*
  * U-Boot General Configurations
  */
 #define CONFIG_SYS_LONGHELP
@@ -108,15 +96,6 @@
 
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_CMDLINE_EDITING
-#define CONFIG_VERSION_VARIABLE
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DOS_PARTITION
-
-/*
- * No NOR
- */
-
-#define CONFIG_SYS_NO_FLASH
 
 /*
  * NAND chip timings for FIXME: which one?
@@ -186,15 +165,10 @@
 #define CONFIG_SPL_TEXT_BASE 0x00000000
 /* SPL will use SRAM as stack */
 #define CONFIG_SPL_STACK     0x0000FFF8
-#define CONFIG_SPL_BOARD_INIT
 /* Use the framework and generic lib */
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
 /* SPL will use serial */
-#define CONFIG_SPL_SERIAL_SUPPORT
 /* SPL will load U-Boot from NAND offset 0x40000 */
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_BOOT