X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fwork_92105.h;h=8d1eee2fcac801466e0d765e5b165ec10ec80727;hb=f113d7d3034672de7d074506a05a7055f1f0dcae;hp=d498c8f3bc6aeb22c9e9908d3667fa96f6bc9122;hpb=7e58a3a148fb94e9ce09fb48d0ddd75c20ee7df9;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/work_92105.h b/include/configs/work_92105.h
index d498c8f..8d1eee2 100644
--- a/include/configs/work_92105.h
+++ b/include/configs/work_92105.h
@@ -14,60 +14,16 @@
 #include <asm/arch/cpu.h>
 
 /*
- * Define work_92105 machine type by hand -- done only for compatibility
- * with original board code
- */
-#define CONFIG_MACH_TYPE		736
-
-#if !defined(CONFIG_SPL_BUILD)
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-
-/*
  * Memory configurations
  */
-#define CONFIG_SYS_MALLOC_LEN		SZ_1M
 #define CONFIG_SYS_SDRAM_BASE		EMC_DYCS0_BASE
 #define CONFIG_SYS_SDRAM_SIZE		SZ_128M
 
-#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + SZ_32K)
-
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + SZ_512K \
-					 - GENERATED_GBL_DATA_SIZE)
-
-/*
- * Ethernet Driver
- */
-
-#define CONFIG_LPC32XX_ETH
-#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-/* FIXME: remove "Waiting for PHY auto negotiation to complete..." message */
-
-/*
- * I2C driver
- */
-
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SPEED 350000
-
-/*
- * I2C EEPROM
- */
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x56
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-
-/*
- * I2C RTC
- */
-
 #define CONFIG_RTC_DS1374
 
 /*
  * U-Boot General Configurations
  */
-#define CONFIG_SYS_CBSIZE		1024
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
 /*
  * NAND chip timings for FIXME: which one?
@@ -86,44 +42,27 @@
  */
 
 /* driver configuration */
-#define CONFIG_SYS_NAND_SELF_INIT
 #define CONFIG_SYS_MAX_NAND_DEVICE 1
 #define CONFIG_SYS_MAX_NAND_CHIPS 1
 #define CONFIG_SYS_NAND_BASE MLC_NAND_BASE
-#define CONFIG_NAND_LPC32XX_MLC
 
 /*
  * GPIO
  */
 
-#define CONFIG_LPC32XX_GPIO
-
 /*
  * Environment
  */
 
 /*
- * Boot Linux
- */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-#define CONFIG_BOOTFILE			"uImage"
-#define CONFIG_LOADADDR			0x80008000
-
-/*
  * SPL
  */
 
 /* SPL will be executed at offset 0 */
 /* SPL will use SRAM as stack */
-#define CONFIG_SPL_STACK     0x0000FFF8
 /* Use the framework and generic lib */
 /* SPL will use serial */
 /* SPL will load U-Boot from NAND offset 0x40000 */
-#define CONFIG_SYS_NAND_U_BOOT_OFFS  0x00040000
-#define CONFIG_SPL_PAD_TO 0x20000
 /* U-Boot will be 0x40000 bytes, loaded and run at CONFIG_SYS_TEXT_BASE */
 #define CONFIG_SYS_MONITOR_LEN 0x40000 /* actually, MAX size */
 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE