X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fwork_92105.h;h=73a107e3c3f545e3191f95e5c3c95540bdc0ff90;hb=83d290c56fab2d38cd1ab4c4cc7099559c1d5046;hp=b08641fcf0daf3b447a87855aba934f3cd4d1a2b;hpb=711b534120c0a5f73cdb9a25eb91f9aa0c5e09ab;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/work_92105.h b/include/configs/work_92105.h
index b08641f..73a107e 100644
--- a/include/configs/work_92105.h
+++ b/include/configs/work_92105.h
@@ -1,10 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * WORK Microwave work_92105 board configuration file
  *
  * (C) Copyright 2014  DENX Software Engineering GmbH
  * Written-by: Albert ARIBAUD <albert.aribaud@3adev.fr>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_WORK_92105_H__
@@ -18,16 +17,13 @@
  * Define work_92105 machine type by hand -- done only for compatibility
  * with original board code
  */
-#define MACH_TYPE_WORK_92105		736
-#define CONFIG_MACH_TYPE		MACH_TYPE_WORK_92105
+#define CONFIG_MACH_TYPE		736
 
 #define CONFIG_SYS_ICACHE_OFF
 #define CONFIG_SYS_DCACHE_OFF
 #if !defined(CONFIG_SPL_BUILD)
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #endif
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_EARLY_INIT_R
 
 /* generate LPC32XX-specific SPL image */
 #define CONFIG_LPC32XX_SPL
@@ -39,7 +35,6 @@
 #define CONFIG_SYS_MALLOC_LEN		SZ_1M
 #define CONFIG_SYS_SDRAM_BASE		EMC_DYCS0_BASE
 #define CONFIG_SYS_SDRAM_SIZE		SZ_128M
-#define CONFIG_SYS_TEXT_BASE		0x80100000
 #define CONFIG_SYS_MEMTEST_START	(CONFIG_SYS_SDRAM_BASE + SZ_32K)
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_TEXT_BASE - SZ_1M)
 
@@ -52,7 +47,6 @@
  * Serial Driver
  */
 #define CONFIG_SYS_LPC32XX_UART		5   /* UART5 - NS16550 */
-#define CONFIG_BAUDRATE			115200
 
 /*
  * Ethernet Driver
@@ -60,8 +54,6 @@
 
 #define CONFIG_PHY_SMSC
 #define CONFIG_LPC32XX_ETH
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_ADDR 0
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 /* FIXME: remove "Waiting for PHY auto negotiation to complete..." message */
 
@@ -77,7 +69,6 @@
  * I2C EEPROM
  */
 
-#define CONFIG_CMD_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x56
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
 
@@ -85,37 +76,14 @@
  * I2C RTC
  */
 
-#define CONFIG_CMD_DATE
 #define CONFIG_RTC_DS1374
 
 /*
- * I2C Temperature Sensor (DTT)
- */
-
-#define CONFIG_CMD_DTT
-#define CONFIG_DTT_SENSORS { 0, 1 }
-#define CONFIG_DTT_DS620
-
-/*
  * U-Boot General Configurations
  */
-#define CONFIG_SYS_LONGHELP
 #define CONFIG_SYS_CBSIZE		1024
-#define CONFIG_SYS_PBSIZE		\
-	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS		16
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_DOS_PARTITION
-
-/*
- * No NOR
- */
-
-#define CONFIG_SYS_NO_FLASH
-
 /*
  * NAND chip timings for FIXME: which one?
  */
@@ -139,8 +107,6 @@
 #define CONFIG_SYS_NAND_BASE MLC_NAND_BASE
 #define CONFIG_NAND_LPC32XX_MLC
 
-#define CONFIG_CMD_NAND
-
 /*
  * GPIO
  */
@@ -151,15 +117,11 @@
  * SSP/SPI/DISPLAY
  */
 
-#define CONFIG_LPC32XX_SSP
 #define CONFIG_LPC32XX_SSP_TIMEOUT 100000
-#define CONFIG_CMD_MAX6957
-#define CONFIG_CMD_HD44760
 /*
  * Environment
  */
 
-#define CONFIG_ENV_IS_IN_NAND		1
 #define CONFIG_ENV_SIZE			0x00020000
 #define CONFIG_ENV_OFFSET		0x00100000
 #define CONFIG_ENV_OFFSET_REDUND	0x00120000
@@ -173,7 +135,6 @@
 #define CONFIG_INITRD_TAG
 
 #define CONFIG_BOOTFILE			"uImage"
-#define CONFIG_BOOTARGS			"console=ttyS2,115200n8"
 #define CONFIG_LOADADDR			0x80008000
 
 /*
@@ -184,9 +145,7 @@
 #define CONFIG_SPL_TEXT_BASE 0x00000000
 /* SPL will use SRAM as stack */
 #define CONFIG_SPL_STACK     0x0000FFF8
-#define CONFIG_SPL_BOARD_INIT
 /* Use the framework and generic lib */
-#define CONFIG_SPL_FRAMEWORK
 /* SPL will use serial */
 /* SPL will load U-Boot from NAND offset 0x40000 */
 #define CONFIG_SPL_NAND_DRIVERS