X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fwoodburn_common.h;h=68a9db5b202472f78dd501eb19a8b6f3702ca896;hb=d56b4b19744c314c26dc77585a7c7a9253d1487d;hp=52d392cb16e404a563ca33055f0380ba5e4da608;hpb=1254ff97abb7606ccd0d7bdcd9f22581c50fe535;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/woodburn_common.h b/include/configs/woodburn_common.h
index 52d392c..68a9db5 100644
--- a/include/configs/woodburn_common.h
+++ b/include/configs/woodburn_common.h
@@ -16,17 +16,9 @@
  /* High Level Configuration Options */
 #define CONFIG_MX35
 #define CONFIG_MX35_HCLK_FREQ	24000000
+#define CONFIG_SYS_FSL_CLK
 
 #define CONFIG_SYS_DCACHE_OFF
-#define CONFIG_SYS_CACHELINE_SIZE	32
-
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_SYS_GENERIC_BOARD
-
-/* Only in case the value is not present in mach-types.h */
-#ifndef MACH_TYPE_FLEA3
-#define MACH_TYPE_FLEA3                3668
-#endif
 
 #define CONFIG_MACH_TYPE		MACH_TYPE_FLEA3
 
@@ -47,6 +39,8 @@
  */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_SYS_SPD_BUS_NUM		0
 #define CONFIG_MXC_SPI
@@ -60,10 +54,7 @@
 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR	0x8
 #define CONFIG_RTC_MC13XXX
 
-
 /* mmc driver */
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 #define CONFIG_SYS_FSL_ESDHC_NUM	1
@@ -77,41 +68,23 @@
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX	1
-#define CONFIG_BAUDRATE		115200
 
 /*
  * Command definition
  */
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
 #define CONFIG_BOOTP_SUBNETMASK
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_DNS
 
 #define CONFIG_CMD_NAND
-#define CONFIG_CMD_CACHE
-
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_MII
-
-#define CONFIG_CMD_MMC
-#define CONFIG_DOS_PARTITION
-#define CONFIG_EFI_PARTITION
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 
-#define CONFIG_CMD_GPIO
 #define CONFIG_MXC_GPIO
 
 #define CONFIG_NET_RETRY_COUNT	100
 
-#define CONFIG_BOOTDELAY	3
 
 #define CONFIG_LOADADDR		0x80800000	/* loadaddr env var */
 
-
 /*
  * Ethernet on SOC (FEC)
  */
@@ -130,9 +103,7 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP	/* undef to save memory */
-#define CONFIG_SYS_PROMPT	"woodburn U-Boot > "
 #define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_HUSH_PARSER	/* Use the HUSH parser */
 
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
@@ -147,13 +118,6 @@
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 
 /*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE	(128 * 1024)	/* regular stack */
-
-/*
  * Physical Memory Map
  */
 #define CONFIG_NR_DRAM_BANKS	1
@@ -171,7 +135,6 @@
 /*
  * MTD Command for mtdparts
  */
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_DEVICE
 #define CONFIG_FLASH_CFI_MTD
 #define CONFIG_MTD_PARTITIONS