X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fwarp7.h;h=8ceaa0c6c604a3c35f3d5543c9def16fb522109a;hb=bdf97b5d393fc94666a847e9bac1c358b2c63c59;hp=4528f094ce3447c80619c9971785ead91926f7dd;hpb=a5d67547dd9c7a527dfda1967010e703a22441ff;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/warp7.h b/include/configs/warp7.h
index 4528f09..8ceaa0c 100644
--- a/include/configs/warp7.h
+++ b/include/configs/warp7.h
@@ -1,58 +1,68 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2016 NXP Semiconductors
  *
  * Configuration settings for the i.MX7S Warp board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __WARP7_CONFIG_H
 #define __WARP7_CONFIG_H
 
 #include "mx7_common.h"
+#include <imximage.h>
 
 #define PHYS_SDRAM_SIZE			SZ_512M
 
-#define CONFIG_MXC_UART_BASE		UART1_IPS_BASE_ADDR
-
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(35 * SZ_1M)
 
 /* MMC Config*/
 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC3_BASE_ADDR
-#define CONFIG_SUPPORT_EMMC_BOOT
 #define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE
 #define CONFIG_SYS_MMC_IMG_LOAD_PART	1
 
-#define CONFIG_PARTITION_UUIDS
-#define CONFIG_CMD_PART
+/* Switch on SERIAL_TAG */
+#define CONFIG_SERIAL_TAG
 
 #define CONFIG_DFU_ENV_SETTINGS \
-	"dfu_alt_info=boot raw 0x2 0x400 mmcpart 1\0" \
+	"dfu_alt_info=boot raw 0x2 0x1000 mmcpart 1\0" \
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	CONFIG_DFU_ENV_SETTINGS \
 	"script=boot.scr\0" \
+	"script_signed=boot.scr.imx-signed\0" \
 	"image=zImage\0" \
 	"console=ttymxc0\0" \
 	"ethact=usb_ether\0" \
 	"fdt_high=0xffffffff\0" \
 	"initrd_high=0xffffffff\0" \
 	"fdt_file=imx7s-warp.dtb\0" \
-	"fdt_addr=0x83000000\0" \
+	"fdt_addr=" __stringify(CONFIG_SYS_FDT_ADDR)"\0" \
+	"optee_addr=" __stringify(CONFIG_OPTEE_LOAD_ADDR)"\0" \
 	"boot_fdt=try\0" \
 	"ip_dyn=yes\0" \
 	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
 	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
-	"finduuid=part uuid mmc 0:2 uuid\0" \
+	"rootpart=" __stringify(CONFIG_WARP7_ROOT_PART) "\0" \
+	"finduuid=part uuid mmc 0:${rootpart} uuid\0" \
 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
 		"root=PARTUUID=${uuid} rootwait rw\0" \
+	"ivt_offset=" __stringify(BOOTROM_IVT_HDR_OFFSET)"\0"\
+	"warp7_auth_or_fail=hab_auth_img_or_fail ${hab_ivt_addr} ${filesize} 0;\0" \
+	"do_bootscript_hab=" \
+		"if test ${hab_enabled} -eq 1; then " \
+			"setexpr hab_ivt_addr ${loadaddr} - ${ivt_offset}; " \
+			"setenv script ${script_signed}; " \
+			"load mmc ${mmcdev}:${mmcpart} ${hab_ivt_addr} ${script}; " \
+			"run warp7_auth_or_fail; " \
+			"run bootscript; "\
+		"fi;\0" \
 	"loadbootscript=" \
-		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+		"load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
 		"source\0" \
-	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
-	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+	"loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+	"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run finduuid; " \
 		"run mmcargs; " \
@@ -73,6 +83,7 @@
 #define CONFIG_BOOTCOMMAND \
 	   "mmc dev ${mmcdev};" \
 	   "mmc dev ${mmcdev}; if mmc rescan; then " \
+		   "run do_bootscript_hab;" \
 		   "if run loadbootscript; then " \
 			   "run bootscript; " \
 		   "else " \
@@ -88,10 +99,7 @@
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 #define CONFIG_SYS_HZ			1000
 
-#define CONFIG_STACKSIZE		SZ_128K
-
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
 
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
@@ -104,21 +112,11 @@
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
 /* I2C configs */
-#define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1
 #define CONFIG_SYS_I2C_SPEED		100000
 
-/* PMIC */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_PFUZE3000
-#define CONFIG_POWER_PFUZE3000_I2C_ADDR	0x08
-
-/* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH
+/* environment organization */
 #define CONFIG_ENV_SIZE			SZ_8K
-#define CONFIG_ENV_IS_IN_MMC
 
 #define CONFIG_ENV_OFFSET		(8 * SZ_64K)
 #define CONFIG_SYS_FSL_USDHC_NUM	1
@@ -137,16 +135,13 @@
 
 #define CONFIG_USBD_HS
 
-#define CONFIG_USB_FUNCTION_MASS_STORAGE
-
 /* USB Device Firmware Update support */
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE	SZ_16M
 #define DFU_DEFAULT_POLL_TIMEOUT	300
 
-#define CONFIG_USB_ETHER
-#define CONFIG_USB_ETH_CDC
-#define CONFIG_USB_ETH_RNDIS
-#define CONFIG_USBNET_HOST_ADDR		"de:ad:be:af:00:00"
 #define CONFIG_USBNET_DEV_ADDR		"de:ad:be:af:00:01"
 
+/* Environment variable name to represent HAB enable state */
+#define HAB_ENABLED_ENVNAME		"hab_enabled"
+
 #endif