X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fwarp7.h;h=60a902b2c74735fb71e5ff45e06d7afb871a5ad2;hb=d789a8259e3b3b77e3eb2b090373ab2cbc225629;hp=0ef8e3594804883169688d9cd1dfbe741be2e222;hpb=623de3f08631bd8aab79f38b71ada18a1f9d836f;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/warp7.h b/include/configs/warp7.h
index 0ef8e35..60a902b 100644
--- a/include/configs/warp7.h
+++ b/include/configs/warp7.h
@@ -13,17 +13,6 @@
 
 #define PHYS_SDRAM_SIZE			SZ_512M
 
-/*
- * If we have defined the OPTEE ram size and not OPTEE it means that we were
- * launched by OPTEE, because of that we shall skip all the low level
- * initialization since it was already done by ATF or OPTEE
- */
-#ifdef CONFIG_OPTEE_TZDRAM_SIZE
-#ifndef CONFIG_OPTEE
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-#endif
-
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(35 * SZ_1M)
 
@@ -38,10 +27,23 @@
 #define CONFIG_DFU_ENV_SETTINGS \
 	"dfu_alt_info=boot raw 0x2 0x1000 mmcpart 1\0" \
 
+/* When booting with FIT specify the node entry containing boot.scr */
+#if defined(CONFIG_FIT)
+#define BOOT_SCR_STRING "source ${bootscriptaddr}:${bootscr_fitimage_name}\0"
+#else
+#define BOOT_SCR_STRING "source ${bootscriptaddr}\0"
+#endif
+
+#ifndef CONFIG_OPTEE_LOAD_ADDR
+#define CONFIG_OPTEE_LOAD_ADDR 0
+#endif
+
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	CONFIG_DFU_ENV_SETTINGS \
 	"script=boot.scr\0" \
+	"bootscr_fitimage_name=bootscr\0" \
 	"script_signed=boot.scr.imx-signed\0" \
+	"bootscriptaddr=0x83200000\0" \
 	"image=zImage\0" \
 	"console=ttymxc0\0" \
 	"ethact=usb_ether\0" \
@@ -49,6 +51,7 @@
 	"initrd_high=0xffffffff\0" \
 	"fdt_file=imx7s-warp.dtb\0" \
 	"fdt_addr=" __stringify(CONFIG_SYS_FDT_ADDR)"\0" \
+	"fdtovaddr=0x83100000\0" \
 	"optee_addr=" __stringify(CONFIG_OPTEE_LOAD_ADDR)"\0" \
 	"boot_fdt=try\0" \
 	"ip_dyn=yes\0" \
@@ -62,16 +65,16 @@
 	"warp7_auth_or_fail=hab_auth_img_or_fail ${hab_ivt_addr} ${filesize} 0;\0" \
 	"do_bootscript_hab=" \
 		"if test ${hab_enabled} -eq 1; then " \
-			"setexpr hab_ivt_addr ${loadaddr} - ${ivt_offset}; " \
+			"setexpr hab_ivt_addr ${bootscriptaddr} - ${ivt_offset}; " \
 			"setenv script ${script_signed}; " \
 			"load mmc ${mmcdev}:${mmcpart} ${hab_ivt_addr} ${script}; " \
 			"run warp7_auth_or_fail; " \
 			"run bootscript; "\
 		"fi;\0" \
 	"loadbootscript=" \
-		"load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+		"load mmc ${mmcdev}:${mmcpart} ${bootscriptaddr} ${script};\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
-		"source\0" \
+		BOOT_SCR_STRING \
 	"loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 	"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 	"mmcboot=echo Booting from mmc ...; " \
@@ -104,9 +107,6 @@
 		   "fi; " \
 	   "fi"
 
-#define CONFIG_SYS_MEMTEST_START	0x80000000
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x20000000)
-
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 #define CONFIG_SYS_HZ			1000
 
@@ -122,25 +122,32 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
+/*
+ * Environment starts at CONFIG_ENV_OFFSET= 0xC0000 = 768k = 768*1024 = 786432
+ *
+ * Detect overlap between U-Boot image and environment area in build-time
+ *
+ * CONFIG_BOARD_SIZE_LIMIT = CONFIG_ENV_OFFSET - u-boot.imx offset
+ * CONFIG_BOARD_SIZE_LIMIT = 768k - 1k = 767k = 785408
+ *
+ * Currently CONFIG_BOARD_SIZE_LIMIT does not handle expressions, so
+ * write the direct value here
+ */
+#define CONFIG_BOARD_SIZE_LIMIT		785408
+
 /* I2C configs */
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_SPEED		100000
 
 /* environment organization */
-#define CONFIG_ENV_SIZE			SZ_8K
 
-#define CONFIG_ENV_OFFSET		(8 * SZ_64K)
 #define CONFIG_SYS_FSL_USDHC_NUM	1
 
 #define CONFIG_SYS_MMC_ENV_DEV		0
 #define CONFIG_SYS_MMC_ENV_PART		0
 
-/* USB Configs */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 
 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_MXC_USB_FLAGS		0
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Only OTG1 port enabled */
 
 #define CONFIG_IMX_THERMAL