X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fwarp.h;h=f17eea117f3ab3916bb227ac940b1b8033ca6649;hb=f9a48654ee70fbad29f487d074fd36a1548b4209;hp=12c7c383c109f49853864f8afb721f42059f3c8e;hpb=c98b171e1098f94b2ff7720c45a25a602882f876;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/warp.h b/include/configs/warp.h
index 12c7c38..f17eea1 100644
--- a/include/configs/warp.h
+++ b/include/configs/warp.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2014 O.S. Systems Software LTDA.
  * Copyright (C) 2014 Kynetics LLC.
@@ -6,8 +7,6 @@
  * Author: Otavio Salvador <otavio@ossystems.com.br>
  *
  * Configuration settings for the WaRP Board
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -18,30 +17,15 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(35 * SZ_1M) /* Increase due to DFU */
 
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
-
-#define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE		UART1_IPS_BASE_ADDR
 
 /* MMC Configs */
 #define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC2_BASE_ADDR
-#define CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT
 #define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE
-#define CONFIG_SUPPORT_EMMC_BOOT
 
 /* Watchdog */
-#define CONFIG_HW_WATCHDOG
-#define CONFIG_IMX_WATCHDOG
-#define CONFIG_WATCHDOG_TIMEOUT_MSECS 30000 /* 30s */
-
-#define CONFIG_SYS_MEMTEST_START	0x80000000
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + SZ_256M)
-
-#define CONFIG_STACKSIZE		SZ_128K
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
 
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
@@ -53,19 +37,11 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-#define CONFIG_ENV_OFFSET		(6 * SZ_64K)
-#define CONFIG_ENV_SIZE			SZ_8K
-#define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_SYS_MMC_ENV_DEV		0
-
 /* VDD voltage 1.65 - 1.95 */
 #define CONFIG_SYS_SD_VOLTAGE		0x00000080
 
 /* USB Configs */
 #ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS		0
@@ -74,10 +50,6 @@
 
 #define CONFIG_USBD_HS
 
-#define CONFIG_USB_FUNCTION_MASS_STORAGE
-
-#define CONFIG_USB_FUNCTION_DFU
-#define CONFIG_DFU_MMC
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
 #define DFU_DEFAULT_POLL_TIMEOUT 300
 
@@ -106,10 +78,10 @@
 	"ip_dyn=yes\0" \
 	"mmcdev=0\0" \
 	"mmcpart=1\0" \
-	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
+	"finduuid=part uuid mmc 0:2 uuid\0" \
 	"dfu_alt_info=boot raw 0x2 0x400 mmcpart 1\0" \
 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
-		"root=${mmcroot}\0" \
+		"root=PARTUUID=${uuid} rootwait rw\0" \
 	"loadbootscript=" \
 		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
@@ -117,6 +89,7 @@
 	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 	"mmcboot=echo Booting from mmc ...; " \
+		"run finduuid; " \
 		"run mmcargs; " \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 			"if run loadfdt; then " \