X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fwarp.h;h=68361a6199ee4d29b0d0c1c2da819d4d09a6caf9;hb=6d7dacf726ca043a3f5487549bbfa506c990c813;hp=2331767b13aef25e0ad8be59a578cd352b7406b0;hpb=f448c5d3200372fa73f340144d013fdecf4e2f1f;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/warp.h b/include/configs/warp.h
index 2331767..68361a6 100644
--- a/include/configs/warp.h
+++ b/include/configs/warp.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2014 O.S. Systems Software LTDA.
  * Copyright (C) 2014 Kynetics LLC.
@@ -6,8 +7,6 @@
  * Author: Otavio Salvador <otavio@ossystems.com.br>
  *
  * Configuration settings for the WaRP Board
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -18,32 +17,20 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(35 * SZ_1M) /* Increase due to DFU */
 
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
-
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE		UART1_IPS_BASE_ADDR
 
 /* MMC Configs */
 #define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC2_BASE_ADDR
-#define CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT
 #define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE
-#define CONFIG_SUPPORT_EMMC_BOOT
 
 /* Watchdog */
-#define CONFIG_HW_WATCHDOG
-#define CONFIG_IMX_WATCHDOG
-#define CONFIG_WATCHDOG_TIMEOUT_MSECS 30000 /* 30s */
 
 #define CONFIG_SYS_MEMTEST_START	0x80000000
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + SZ_256M)
 
-#define CONFIG_STACKSIZE		SZ_128K
-
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
-#define PHYS_SDRAM_SIZE			SZ_512M
 
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
@@ -54,46 +41,36 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-#define CONFIG_ENV_OFFSET		(6 * SZ_64K)
-#define CONFIG_ENV_SIZE			SZ_8K
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV		0
 
 /* VDD voltage 1.65 - 1.95 */
 #define CONFIG_SYS_SD_VOLTAGE		0x00000080
 
 /* USB Configs */
-#define CONFIG_CMD_USB
 #ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS		0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	1 /* Only OTG2 port enabled */
 #endif
 
-#define CONFIG_CI_UDC
 #define CONFIG_USBD_HS
-#define CONFIG_USB_GADGET_DUALSPEED
-
-#define CONFIG_USB_GADGET
-#define CONFIG_CMD_USB_MASS_STORAGE
-#define CONFIG_USB_GADGET_MASS_STORAGE
-#define CONFIG_USBDOWNLOAD_GADGET
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
 
-#define CONFIG_G_DNL_VENDOR_NUM		0x0525
-#define CONFIG_G_DNL_PRODUCT_NUM	0xa4a5
-#define CONFIG_G_DNL_MANUFACTURER	"FSL"
-
-#define CONFIG_CMD_DFU
-#define CONFIG_DFU_FUNCTION
-#define CONFIG_DFU_MMC
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
 #define DFU_DEFAULT_POLL_TIMEOUT 300
 
+/* I2C Configs */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_SPEED		  100000
+
+/* PMIC */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_MAX77696
+
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"script=boot.scr\0" \
 	"image=zImage\0" \
@@ -107,10 +84,10 @@
 	"ip_dyn=yes\0" \
 	"mmcdev=0\0" \
 	"mmcpart=1\0" \
-	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
+	"finduuid=part uuid mmc 0:2 uuid\0" \
 	"dfu_alt_info=boot raw 0x2 0x400 mmcpart 1\0" \
 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
-		"root=${mmcroot}\0" \
+		"root=PARTUUID=${uuid} rootwait rw\0" \
 	"loadbootscript=" \
 		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
@@ -118,6 +95,7 @@
 	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 	"mmcboot=echo Booting from mmc ...; " \
+		"run finduuid; " \
 		"run mmcargs; " \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 			"if run loadfdt; then " \