X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fwandboard.h;h=97d193ba49c6ebd81c54e3172009d01ccc057fef;hb=6e6cf015e7cdd7ca83a933320a81201972bd5e5e;hp=999ee6de97a24ecc0cddd7f77d370f27584007a0;hpb=711b534120c0a5f73cdb9a25eb91f9aa0c5e09ab;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
index 999ee6d..97d193b 100644
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -13,22 +13,18 @@
 #include "mx6_common.h"
 
 #include "imx6_spl.h"
+#define CONFIG_DISPLAY_BOARDINFO_LATE
 
-#define MACH_TYPE_WANDBOARD		4412
-#define CONFIG_MACH_TYPE		MACH_TYPE_WANDBOARD
+#define CONFIG_MACH_TYPE		MACH_TYPE_WANDBOARD_IMX6
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)
 
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
-
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE		UART1_BASE
 
 /* SATA Configs */
 
-#define CONFIG_CMD_SATA
 #ifdef CONFIG_CMD_SATA
 #define CONFIG_DWC_AHSATA
 #define CONFIG_SYS_SATA_MAX_DEVICE	1
@@ -38,9 +34,6 @@
 #define CONFIG_LIBATA
 #endif
 
-/* Command definition */
-#define CONFIG_CMD_BMODE
-
 #define CONFIG_SYS_MEMTEST_START	0x10000000
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
 
@@ -52,13 +45,17 @@
 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED		100000
 
+/* PMIC */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_PFUZE100
+#define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08
+
 /* MMC Configuration */
 #define CONFIG_SYS_FSL_USDHC_NUM	2
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 
 /* USB Configs */
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	2
 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS		0
@@ -70,26 +67,20 @@
 #define CONFIG_FEC_XCV_TYPE		RGMII
 #define CONFIG_ETHPRIME			"FEC"
 #define CONFIG_FEC_MXC_PHYADDR		1
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_ATHEROS
 
 /* Framebuffer */
-#define CONFIG_VIDEO
+#ifdef CONFIG_VIDEO
 #define CONFIG_VIDEO_IPUV3
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SCREEN_ALIGN
 #define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
-#define CONFIG_IPUV3_CLK 260000000
-#define CONFIG_CMD_HDMIDETECT
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP
+#endif
 
 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 #define CONFIG_EXTRA_ENV_SETTINGS \
@@ -102,6 +93,7 @@
 	"fdt_addr=0x18000000\0" \
 	"ip_dyn=yes\0" \
 	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
+	"finduuid=part uuid mmc 0:1 uuid\0" \
 	"update_sd_firmware_filename=u-boot.imx\0" \
 	"update_sd_firmware=" \
 		"if test ${ip_dyn} = yes; then " \
@@ -117,6 +109,12 @@
 			"fi; "	\
 		"fi\0" \
 	"findfdt="\
+		"if test $board_name = D1 && test $board_rev = MX6QP ; then " \
+			"setenv fdtfile imx6qp-wandboard-revd1.dtb; fi; " \
+		"if test $board_name = D1 && test $board_rev = MX6Q ; then " \
+			"setenv fdtfile imx6q-wandboard-revd1.dtb; fi; " \
+		"if test $board_name = D1 && test $board_rev = MX6DL ; then " \
+			"setenv fdtfile imx6dl-wandboard-revd1.dtb; fi; " \
 		"if test $board_name = C1 && test $board_rev = MX6Q ; then " \
 			"setenv fdtfile imx6q-wandboard.dtb; fi; " \
 		"if test $board_name = C1 && test $board_rev = MX6DL ; then " \
@@ -137,14 +135,11 @@
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 0) \
 	func(MMC, mmc, 1) \
+	func(SATA, sata, 0) \
 	func(USB, usb, 0) \
 	func(PXE, pxe, na) \
 	func(DHCP, dhcp, na)
 
-#define CONFIG_BOOTCOMMAND \
-	   "run findfdt; " \
-	   "run distro_bootcmd"
-
 #include <config_distro_bootcmd.h>
 
 /* Physical Memory Map */
@@ -163,7 +158,6 @@
 /* Environment organization */
 #define CONFIG_ENV_SIZE			(8 * 1024)
 
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_ENV_OFFSET		(768 * 1024)
 #define CONFIG_SYS_MMC_ENV_DEV		0