X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fwandboard.h;h=7f1c925d02fb2c22e3dc6e23bf33dac84baa49b7;hb=86cf1c82850f7c226f23684e19616e526ffaf10f;hp=ed25f420d00b6e71820aa707e84d510f9f8986e3;hpb=1f032ce23ac8e789b716645dc9fd8392787add20;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
index ed25f42..7f1c925 100644
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -1,15 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2013 Freescale Semiconductor, Inc.
  *
  * Configuration settings for the Wandboard.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <config_distro_defaults.h>
 #include "mx6_common.h"
 
 #include "imx6_spl.h"
@@ -25,12 +23,10 @@
 /* SATA Configs */
 
 #ifdef CONFIG_CMD_SATA
-#define CONFIG_DWC_AHSATA
 #define CONFIG_SYS_SATA_MAX_DEVICE	1
 #define CONFIG_DWC_AHSATA_PORT_ID	0
 #define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
 #define CONFIG_LBA48
-#define CONFIG_LIBATA
 #endif
 
 #define CONFIG_SYS_MEMTEST_START	0x10000000
@@ -44,6 +40,12 @@
 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED		100000
 
+/* PMIC */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_PFUZE100
+#define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08
+
 /* MMC Configuration */
 #define CONFIG_SYS_FSL_USDHC_NUM	2
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
@@ -71,14 +73,12 @@
 #define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
-#define CONFIG_IPUV3_CLK 260000000
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP
 #endif
 
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 #define CONFIG_EXTRA_ENV_SETTINGS \
-	"console=ttymxc0,115200\0" \
+	"console=ttymxc0\0" \
 	"splashpos=m,m\0" \
 	"fdtfile=undefined\0" \
 	"fdt_high=0xffffffff\0" \
@@ -103,6 +103,12 @@
 			"fi; "	\
 		"fi\0" \
 	"findfdt="\
+		"if test $board_name = D1 && test $board_rev = MX6QP ; then " \
+			"setenv fdtfile imx6qp-wandboard-revd1.dtb; fi; " \
+		"if test $board_name = D1 && test $board_rev = MX6Q ; then " \
+			"setenv fdtfile imx6q-wandboard-revd1.dtb; fi; " \
+		"if test $board_name = D1 && test $board_rev = MX6DL ; then " \
+			"setenv fdtfile imx6dl-wandboard-revd1.dtb; fi; " \
 		"if test $board_name = C1 && test $board_rev = MX6Q ; then " \
 			"setenv fdtfile imx6q-wandboard.dtb; fi; " \
 		"if test $board_name = C1 && test $board_rev = MX6DL ; then " \
@@ -123,19 +129,14 @@
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 0) \
 	func(MMC, mmc, 1) \
+	func(SATA, sata, 0) \
 	func(USB, usb, 0) \
 	func(PXE, pxe, na) \
 	func(DHCP, dhcp, na)
 
-#define CONFIG_BOOTCOMMAND \
-	   "run findfdt; " \
-	   "run finduuid; " \
-	   "run distro_bootcmd"
-
 #include <config_distro_bootcmd.h>
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
 
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM