X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fwandboard.h;h=2e6262f0f4c6e038215c082ef63e30160490a141;hb=bdf97b5d393fc94666a847e9bac1c358b2c63c59;hp=7e9757a4806fe9e3915979eddfd1b78776af1672;hpb=0ff27d4a94637d4b1937c625d33212375bd118d9;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
index 7e9757a..2e6262f 100644
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -1,15 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2013 Freescale Semiconductor, Inc.
  *
  * Configuration settings for the Wandboard.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <config_distro_defaults.h>
 #include "mx6_common.h"
 
 #include "imx6_spl.h"
@@ -24,69 +22,44 @@
 
 /* SATA Configs */
 
-#define CONFIG_CMD_SATA
 #ifdef CONFIG_CMD_SATA
-#define CONFIG_DWC_AHSATA
 #define CONFIG_SYS_SATA_MAX_DEVICE	1
 #define CONFIG_DWC_AHSATA_PORT_ID	0
 #define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
 #define CONFIG_LBA48
-#define CONFIG_LIBATA
 #endif
 
-/* Command definition */
-#define CONFIG_CMD_BMODE
-
 #define CONFIG_SYS_MEMTEST_START	0x10000000
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
 
-/* I2C Configs */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
-#define CONFIG_SYS_I2C_SPEED		100000
-
 /* MMC Configuration */
 #define CONFIG_SYS_FSL_USDHC_NUM	2
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 
 /* USB Configs */
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_MAX_CONTROLLER_COUNT	2
 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS		0
 
 /* Ethernet Configuration */
 #define CONFIG_FEC_MXC
-#define CONFIG_MII
 #define IMX_FEC_BASE			ENET_BASE_ADDR
 #define CONFIG_FEC_XCV_TYPE		RGMII
 #define CONFIG_ETHPRIME			"FEC"
 #define CONFIG_FEC_MXC_PHYADDR		1
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_ATHEROS
 
 /* Framebuffer */
-#ifdef CONFIG_VIDEO
-#define CONFIG_VIDEO_IPUV3
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SCREEN_ALIGN
 #define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
-#define CONFIG_IPUV3_CLK 260000000
-#define CONFIG_CMD_HDMIDETECT
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP
-#endif
 
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 #define CONFIG_EXTRA_ENV_SETTINGS \
-	"console=ttymxc0,115200\0" \
+	"console=ttymxc0\0" \
 	"splashpos=m,m\0" \
 	"fdtfile=undefined\0" \
 	"fdt_high=0xffffffff\0" \
@@ -95,6 +68,7 @@
 	"fdt_addr=0x18000000\0" \
 	"ip_dyn=yes\0" \
 	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
+	"finduuid=part uuid mmc 0:1 uuid\0" \
 	"update_sd_firmware_filename=u-boot.imx\0" \
 	"update_sd_firmware=" \
 		"if test ${ip_dyn} = yes; then " \
@@ -110,6 +84,12 @@
 			"fi; "	\
 		"fi\0" \
 	"findfdt="\
+		"if test $board_name = D1 && test $board_rev = MX6QP ; then " \
+			"setenv fdtfile imx6qp-wandboard-revd1.dtb; fi; " \
+		"if test $board_name = D1 && test $board_rev = MX6Q ; then " \
+			"setenv fdtfile imx6q-wandboard-revd1.dtb; fi; " \
+		"if test $board_name = D1 && test $board_rev = MX6DL ; then " \
+			"setenv fdtfile imx6dl-wandboard-revd1.dtb; fi; " \
 		"if test $board_name = C1 && test $board_rev = MX6Q ; then " \
 			"setenv fdtfile imx6q-wandboard.dtb; fi; " \
 		"if test $board_name = C1 && test $board_rev = MX6DL ; then " \
@@ -130,18 +110,14 @@
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 0) \
 	func(MMC, mmc, 1) \
+	func(SATA, sata, 0) \
 	func(USB, usb, 0) \
 	func(PXE, pxe, na) \
 	func(DHCP, dhcp, na)
 
-#define CONFIG_BOOTCOMMAND \
-	   "run findfdt; " \
-	   "run distro_bootcmd"
-
 #include <config_distro_bootcmd.h>
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
 
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
@@ -156,7 +132,6 @@
 /* Environment organization */
 #define CONFIG_ENV_SIZE			(8 * 1024)
 
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_ENV_OFFSET		(768 * 1024)
 #define CONFIG_SYS_MMC_ENV_DEV		0