X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fwalnut.h;h=d2d1ce95bcbd8c985d66460c0ff87cef20620917;hb=cb33bda44f4bbf6fb58adf41dced313ca38da6fc;hp=b23824bd0abe2096d5803e2925403e56fc08c085;hpb=3be2bdf5dc69b3142c1162a59bc67191c9077567;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/walnut.h b/include/configs/walnut.h
index b23824b..d2d1ce9 100644
--- a/include/configs/walnut.h
+++ b/include/configs/walnut.h
@@ -2,7 +2,7 @@
  * (C) Copyright 2000-2005
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
- * SPDX-License-Identifier:	GPL-2.0+ 
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /*
@@ -18,7 +18,6 @@
  */
 
 #define CONFIG_405GP		1	/* This is a PPC405 CPU		*/
-#define CONFIG_4xx		1	/* ...member of PPC4xx family	*/
 #define CONFIG_WALNUT		1	/* ...on a WALNUT board		*/
 					/* ...or on a SYCAMORE board	*/
 
@@ -30,8 +29,6 @@
 #define CONFIG_HOSTNAME		walnut
 #include "amcc-common.h"
 
-#define CONFIG_BOARD_EARLY_INIT_F 1	/* Call board_early_init_f	*/
-
 #define CONFIG_SYS_CLK_FREQ	33333333 /* external frequency to pll	*/
 
 /*
@@ -54,10 +51,8 @@
 /*
  * Commands additional to the ones defined in amcc-common.h
  */
-#define CONFIG_CMD_DATE
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_SNTP
 
 #define CONFIG_SPD_EEPROM      1       /* use SPD EEPROM for setup    */
 
@@ -81,7 +76,6 @@
  */
 #define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
 
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
 #define CONFIG_SYS_I2C_EEPROM_ADDR	(0xa8>>1)
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
@@ -95,10 +89,8 @@
 #define PCI_HOST_FORCE	1		/* configure as pci host	*/
 #define PCI_HOST_AUTO	2		/* detected via arbiter enable	*/
 
-#define CONFIG_PCI			/* include pci support		*/
 #define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
 #define CONFIG_PCI_HOST PCI_HOST_FORCE	/* select pci host function	*/
-#define CONFIG_PCI_PNP			/* do pci plug-and-play		*/
 					/* resource configuration	*/
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup	*/