X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fvme8349.h;h=81c7489252d7e8d9e4a2437cbe2bff25a7039579;hb=553f09823cced77296825f615f00321d932bf914;hp=aefe0e5dbc874d44a363832a039c570a039fa4b4;hpb=14d0a02a168b36e87665b8d7f42fa3e88263d26d;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h
index aefe0e5..81c7489 100644
--- a/include/configs/vme8349.h
+++ b/include/configs/vme8349.h
@@ -2,7 +2,7 @@
  * esd vme8349 U-Boot configuration file
  * Copyright (c) 2008, 2009 esd gmbh Hannover Germany
  *
- * (C) Copyright 2006
+ * (C) Copyright 2006-2010
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * reinhard.arlt@esd-electronics.de
@@ -37,7 +37,7 @@
 /*
  * Top level Makefile configuration choices
  */
-#ifdef CONFIG_caddy2
+#ifdef CONFIG_CADDY2
 #define VME_CADDY2
 #endif
 
@@ -50,21 +50,23 @@
 #define CONFIG_MPC8349		1	/* MPC8349 specific */
 #define CONFIG_VME8349		1	/* ESD VME8349 board specific */
 
+#define	CONFIG_SYS_TEXT_BASE	0xFFF00000
+
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_PCI
 /* Don't enable PCI2 on vme834x - it doesn't exist physically. */
 #undef CONFIG_MPC83XX_PCI2		/* support for 2nd PCI controller */
 
-#define PCI_66M
-#ifdef PCI_66M
+#define CONFIG_PCI_66M
+#ifdef CONFIG_PCI_66M
 #define CONFIG_83XX_CLKIN	66000000	/* in Hz */
 #else
 #define CONFIG_83XX_CLKIN	33000000	/* in Hz */
 #endif
 
 #ifndef CONFIG_SYS_CLK_FREQ
-#ifdef PCI_66M
+#ifdef CONFIG_PCI_66M
 #define CONFIG_SYS_CLK_FREQ	66000000
 #define HRCWL_CSB_TO_CLKIN	HRCWL_CSB_TO_CLKIN_4X1
 #else
@@ -159,10 +161,10 @@
 
 #define CONFIG_SYS_INIT_RAM_LOCK	1
 #define CONFIG_SYS_INIT_RAM_ADDR	0xF7000000	/* Initial RAM addr */
-#define CONFIG_SYS_INIT_RAM_END		0x1000		/* size */
+#define CONFIG_SYS_INIT_RAM_SIZE		0x1000		/* size */
 
 #define CONFIG_SYS_GBL_DATA_SIZE	0x100		/* size init data */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - \
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
 					 CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
@@ -538,14 +540,6 @@
 #define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
 #define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02	/* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */