X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fvme8349.h;h=805f7d3df6610070f1bcc45a60f1b65578d62185;hb=2b9b9cdd5f9ae1cbc786ba3c2255a51b3ea4a636;hp=23dc884b12312d558a27d5a82b790cb2f2da9e2e;hpb=390194d43fa4478ddb638164ddb114c979f3e57a;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h
index 23dc884..805f7d3 100644
--- a/include/configs/vme8349.h
+++ b/include/configs/vme8349.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * esd vme8349 U-Boot configuration file
  * Copyright (c) 2008, 2009 esd gmbh Hannover Germany
@@ -7,8 +8,6 @@
  *
  * reinhard.arlt@esd-electronics.de
  * Based on the MPC8349EMDS config.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /*
@@ -33,10 +32,6 @@
 #define CONFIG_MPC8349		1	/* MPC8349 specific */
 #define CONFIG_VME8349		1	/* ESD VME8349 board specific */
 
-#define	CONFIG_SYS_TEXT_BASE	0xFFF00000
-
-#define CONFIG_MISC_INIT_R
-
 /* Don't enable PCI2 on vme834x - it doesn't exist physically. */
 #undef CONFIG_MPC83XX_PCI2		/* support for 2nd PCI controller */
 
@@ -99,8 +94,6 @@
 /*
  * FLASH on the Local Bus
  */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER			        /* use the CFI driver */
 #ifdef VME_CADDY2
 #define CONFIG_SYS_FLASH_BASE		0xffc00000	/* start of FLASH   */
 #define CONFIG_SYS_FLASH_SIZE		4		/* flash size in MB */
@@ -142,7 +135,6 @@
 #define CONFIG_SYS_LBLAWBAR0_PRELIM	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_LBLAWAR0_PRELIM	(LBLAWAR_EN | LBLAWAR_128MB)
 #endif
-/* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
 
 #define CONFIG_SYS_WINDOW1_BASE		0xf0000000
 #define CONFIG_SYS_BR1_PRELIM		(CONFIG_SYS_WINDOW1_BASE \
@@ -196,7 +188,6 @@
 /*
  * Serial Port
  */
-#define CONFIG_CONS_INDEX	1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
@@ -207,9 +198,6 @@
 #define CONFIG_SYS_NS16550_COM1		(CONFIG_SYS_IMMR + 0x4500)
 #define CONFIG_SYS_NS16550_COM2		(CONFIG_SYS_IMMR + 0x4600)
 
-#define CONFIG_CMDLINE_EDITING		/* add command line history	*/
-#define CONFIG_AUTO_COMPLETE		/* add autocompletion support */
-
 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL
@@ -264,9 +252,6 @@
 #undef PCI_ONE_PCI1
 #endif
 
-#ifndef VME_CADDY2
-#endif
-
 #undef CONFIG_EEPRO100
 #undef CONFIG_TULIP
 
@@ -284,10 +269,6 @@
 /*
  * TSEC configuration
  */
-#ifdef VME_CADDY2
-#else
-#define CONFIG_TSEC_ENET		/* TSEC ethernet support */
-#endif
 
 #if defined(CONFIG_TSEC_ENET)
 
@@ -333,9 +314,6 @@
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
 
 /*
  * Command line configuration.
@@ -352,19 +330,8 @@
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
 
-#if defined(CONFIG_CMD_KGDB)
-	#define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size */
-#else
-	#define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
-#endif
-
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS	16		/* max num of command args */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* Boot Argument Buf Size */
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 256 MB of memory, since this is
@@ -519,7 +486,7 @@
 #define CONFIG_HAS_ETH1
 #endif
 
-#define CONFIG_HOSTNAME		VME8349
+#define CONFIG_HOSTNAME		"VME8349"
 #define CONFIG_ROOTPATH		"/tftpboot/rootfs"
 #define CONFIG_BOOTFILE		"uImage"