X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fvinco.h;h=eebb3f7ca789cdb913514687d4756649a502fe29;hb=bdf97b5d393fc94666a847e9bac1c358b2c63c59;hp=69cb63f4d04266511baa70e7d93327cce02b04c1;hpb=eb6b50f631628f48b7e72432ae878e6ff0e306c3;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/vinco.h b/include/configs/vinco.h
index 69cb63f..eebb3f7 100644
--- a/include/configs/vinco.h
+++ b/include/configs/vinco.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Configuration settings for the VInCo platform.
  *
@@ -6,113 +7,61 @@
  *		      Bo Shen <voice.shen@atmel.com>
  * Copyright (C) 2015 Free Electrons
  *		      Gregory CLEMENT gregory.clement@free-electrons.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/* No NOR flash, this definition should be put before common header */
-#define CONFIG_SYS_NO_FLASH
-
 #include "at91-sama5_common.h"
 
 /* The value in the common file is too far away for the VInCo platform */
-#ifdef CONFIG_SYS_TEXT_BASE
-#undef CONFIG_SYS_TEXT_BASE
-#endif
-#define CONFIG_SYS_TEXT_BASE		0x20f00000
 
 /* serial console */
 #define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE		ATMEL_BASE_USART3
-#define	CONFIG_USART_ID			ATMEL_ID_USART3
+#define CONFIG_USART_BASE		0xfc00c000
+#define CONFIG_USART_ID			30
+
+/* Timer */
+#define CONFIG_SYS_TIMER_COUNTER	0xfc06863c
 
 /* SDRAM */
-#define CONFIG_NR_DRAM_BANKS		1
-#define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
+#define CONFIG_SYS_SDRAM_BASE           0x20000000
 #define CONFIG_SYS_SDRAM_SIZE		0x4000000
 
-
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
 
 #define CONFIG_SYS_LOAD_ADDR		0x22000000 /* load address */
 
 /* SerialFlash */
-#define CONFIG_CMD_SF
 
 #ifdef CONFIG_CMD_SF
-#define CONFIG_ATMEL_SPI
 #define CONFIG_ATMEL_SPI0
 #define CONFIG_SPI_FLASH_STMICRO
-#define CONFIG_SF_DEFAULT_BUS		0
-#define CONFIG_SF_DEFAULT_CS		0
-#define CONFIG_SF_DEFAULT_SPEED		50000000
-#define CONFIG_ENV_SPI_MAX_HZ		50000000
-#define CONFIG_SF_DEFAULT_MODE		(SPI_MODE_0)
-#define CONFIG_ENV_SPI_MODE		(SPI_MODE_0)
 #endif
 
-
 /* MMC */
-#define CONFIG_CMD_MMC
 
 #ifdef CONFIG_CMD_MMC
-#define CONFIG_SUPPORT_EMMC_BOOT
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
 #define CONFIG_GENERIC_ATMEL_MCI
-#define ATMEL_BASE_MMCI			ATMEL_BASE_MCI1
+#define ATMEL_BASE_MMCI			0xfc000000
 #define CONFIG_SYS_MMC_CLK_OD		500000
 
 /* For generating MMC partitions */
-#define CONFIG_PARTITION_UUIDS
-#define CONFIG_RANDOM_UUID
-#define CONFIG_EFI_PARTITION
-#define CONFIG_CMD_GPT
 
 #endif
 
-/* USB */
-#define CONFIG_CMD_USB
-
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_ATMEL
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	3
-#define CONFIG_USB_STORAGE
-#endif
-
 /* USB device */
-#define CONFIG_USB_ETHER
-#define CONFIG_USB_ETH_RNDIS
-#define CONFIG_USBNET_MANUFACTURER      "L+G VInCo"
-
-#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
-#endif
 
 /* Ethernet Hardware */
-#define CONFIG_CMD_MII
 #define CONFIG_PHY_SMSC
 #define CONFIG_MACB
 #define CONFIG_RMII
 #define CONFIG_NET_RETRY_COUNT		20
 #define CONFIG_MACB_SEARCH_PHY
 
-
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_SMSC95XX
-#define CONFIG_USB_ETHER_RNDIS
-
-
-#ifdef CONFIG_SYS_USE_SERIALFLASH
+#ifdef CONFIG_SPI_BOOT
 /* bootstrap + u-boot + env + linux in serial flash */
-#define CONFIG_ENV_SPI_BUS	CONFIG_SF_DEFAULT_BUS
-#define CONFIG_ENV_SPI_CS	CONFIG_SF_DEFAULT_CS
 /* Use our own mapping for the VInCo platform */
 #undef CONFIG_ENV_OFFSET
 #undef CONFIG_ENV_SIZE
@@ -127,9 +76,6 @@
 			    "mmc read ${oftaddr} ${dtb_offset} ${dtb_blksize};" \
 			    "bootz ${loadaddr} -  ${oftaddr}"
 
-#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTARGS	    "console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootfstype=ext4 rootwait quiet lpj=1990656"
-
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"kernel_start=0x20000\0" \
 	"kernel_size=0x800000\0" \
@@ -159,6 +105,5 @@
 	"bootdelay=0\0"
 
 #endif
-#define CONFIG_ZERO_BOOTDELAY_CHECK
 
 #endif