X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fvinco.h;h=9d6001ff03c0bb94b5ff14d4a818b2c39c76318c;hb=29d280c88a1ff331dce2d4c7a5aaf2402aa0fd8a;hp=dc35b289d42a55de1f0671167173206ffade9e44;hpb=4125bbcef6a998ce8580a1f5c53c8c93a56a125b;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/vinco.h b/include/configs/vinco.h
index dc35b28..9d6001f 100644
--- a/include/configs/vinco.h
+++ b/include/configs/vinco.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Configuration settings for the VInCo platform.
  *
@@ -6,8 +7,6 @@
  *		      Bo Shen <voice.shen@atmel.com>
  * Copyright (C) 2015 Free Electrons
  *		      Gregory CLEMENT gregory.clement@free-electrons.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -16,19 +15,17 @@
 #include "at91-sama5_common.h"
 
 /* The value in the common file is too far away for the VInCo platform */
-#ifdef CONFIG_SYS_TEXT_BASE
-#undef CONFIG_SYS_TEXT_BASE
-#endif
-#define CONFIG_SYS_TEXT_BASE		0x20f00000
 
 /* serial console */
 #define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE		ATMEL_BASE_USART3
-#define	CONFIG_USART_ID			ATMEL_ID_USART3
+#define CONFIG_USART_BASE		0xfc00c000
+#define CONFIG_USART_ID			30
+
+/* Timer */
+#define CONFIG_SYS_TIMER_COUNTER	0xfc06863c
 
 /* SDRAM */
-#define CONFIG_NR_DRAM_BANKS		1
-#define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
+#define CONFIG_SYS_SDRAM_BASE           0x20000000
 #define CONFIG_SYS_SDRAM_SIZE		0x4000000
 
 #define CONFIG_SYS_INIT_SP_ADDR \
@@ -39,7 +36,6 @@
 /* SerialFlash */
 
 #ifdef CONFIG_CMD_SF
-#define CONFIG_ATMEL_SPI
 #define CONFIG_ATMEL_SPI0
 #define CONFIG_SPI_FLASH_STMICRO
 #define CONFIG_SF_DEFAULT_BUS		0
@@ -55,24 +51,14 @@
 #ifdef CONFIG_CMD_MMC
 #define CONFIG_SUPPORT_EMMC_BOOT
 #define CONFIG_GENERIC_ATMEL_MCI
-#define ATMEL_BASE_MMCI			ATMEL_BASE_MCI1
+#define ATMEL_BASE_MMCI			0xfc000000
 #define CONFIG_SYS_MMC_CLK_OD		500000
 
 /* For generating MMC partitions */
-#define CONFIG_RANDOM_UUID
-
-#endif
-
-/* USB */
 
-#ifdef CONFIG_CMD_USB
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	3
 #endif
 
 /* USB device */
-#define CONFIG_USB_ETHER
-#define CONFIG_USB_ETH_RNDIS
-#define CONFIG_USBNET_MANUFACTURER      "L+G VInCo"
 
 /* Ethernet Hardware */
 #define CONFIG_PHY_SMSC
@@ -81,11 +67,7 @@
 #define CONFIG_NET_RETRY_COUNT		20
 #define CONFIG_MACB_SEARCH_PHY
 
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_SMSC95XX
-#define CONFIG_USB_ETHER_RNDIS
-
-#ifdef CONFIG_SYS_USE_SERIALFLASH
+#ifdef CONFIG_SPI_BOOT
 /* bootstrap + u-boot + env + linux in serial flash */
 #define CONFIG_ENV_SPI_BUS	CONFIG_SF_DEFAULT_BUS
 #define CONFIG_ENV_SPI_CS	CONFIG_SF_DEFAULT_CS
@@ -103,9 +85,6 @@
 			    "mmc read ${oftaddr} ${dtb_offset} ${dtb_blksize};" \
 			    "bootz ${loadaddr} -  ${oftaddr}"
 
-#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTARGS	    "console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootfstype=ext4 rootwait quiet lpj=1990656"
-
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"kernel_start=0x20000\0" \
 	"kernel_size=0x800000\0" \