X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fvf610twr.h;h=ae5f627ad87ff2cebf60403024af0da1e0bf10c3;hb=85fc970d74d09f33fcdcc649e73c5dc4f5334605;hp=34df6f03529087bc9e7d1932d85cd9299e9e0bce;hpb=c1924d85af4a07dc70aef1ef95c48b54a136733f;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h
index 34df6f0..ae5f627 100644
--- a/include/configs/vf610twr.h
+++ b/include/configs/vf610twr.h
@@ -11,10 +11,6 @@
 
 #include <asm/arch/imx-regs.h>
 
-#define CONFIG_VF610
-
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
 #define CONFIG_SYS_FSL_CLK
 
 #define CONFIG_MACH_TYPE		4146
@@ -24,7 +20,6 @@
 /* Enable passing of ATAGs */
 #define CONFIG_CMDLINE_TAG
 
-#define CONFIG_CMD_FUSE
 #ifdef CONFIG_CMD_FUSE
 #define CONFIG_MXC_OCOTP
 #endif
@@ -32,15 +27,8 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)
 
-#define CONFIG_BOARD_EARLY_INIT_F
-
-#define CONFIG_FSL_LPUART
-#define LPUART_BASE			UART1_BASE
-
 /* Allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_SYS_UART_PORT		(1)
-#define CONFIG_BAUDRATE			115200
 
 /* NAND support */
 #define CONFIG_CMD_NAND
@@ -48,18 +36,10 @@
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 
 #ifdef CONFIG_CMD_NAND
-#define CONFIG_USE_ARCH_MEMCPY
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		NFC_BASE_ADDR
 
-/* UBI */
-#define CONFIG_CMD_UBI
-#define CONFIG_CMD_UBIFS
-#define CONFIG_RBTREE
-#define CONFIG_LZO
-
 /* Dynamic MTD partition support */
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_MTD_DEVICE
 #define MTDIDS_DEFAULT			"nand0=fsl_nfc"
@@ -72,21 +52,10 @@
 					"-(rootfs)"
 #endif
 
-#define CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 #define CONFIG_SYS_FSL_ESDHC_NUM	1
 
-#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
-
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE			ENET_BASE_ADDR
@@ -98,21 +67,18 @@
 /* QSPI Configs*/
 
 #ifdef CONFIG_FSL_QSPI
-#define CONFIG_CMD_SF
 #define FSL_QSPI_FLASH_SIZE		(1 << 24)
 #define FSL_QSPI_FLASH_NUM		2
 #define CONFIG_SYS_FSL_QSPI_LE
 #endif
 
 /* I2C Configs */
-#define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
 #define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
 #define CONFIG_SYS_SPD_BUS_NUM		0
 
-#define CONFIG_BOOTDELAY		3
 
 #define CONFIG_SYS_LOAD_ADDR		0x82000000
 
@@ -226,8 +192,6 @@
 
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #undef CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE		\
@@ -235,16 +199,9 @@
 #define CONFIG_SYS_MAXARGS		16	/* max number of command args */
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
-#define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_MEMTEST_START	0x80010000
 #define CONFIG_SYS_MEMTEST_END		0x87C00000
 
-/*
- * Stack sizes
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE		(128 * 1024)	/* regular stack */
-
 /* Physical memory map */
 #define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM			(0x80000000)
@@ -259,9 +216,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-/* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH
-
 #ifdef CONFIG_ENV_IS_IN_MMC
 #define CONFIG_ENV_SIZE			(8 * 1024)
 
@@ -276,7 +230,4 @@
 #define CONFIG_ENV_OFFSET		0x180000
 #endif
 
-#define CONFIG_OF_LIBFDT
-#define CONFIG_CMD_BOOTZ
-
 #endif