X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fvf610twr.h;h=a8cd96b02ea780dd21bffa39224757a9e1dfc41c;hb=a5d67547dd9c7a527dfda1967010e703a22441ff;hp=aa310411bf2ddb091cf9134f23c5cd1a80079373;hpb=9bea236b3402a262772b66d055ec6431cbd3ba87;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h
index aa31041..a8cd96b 100644
--- a/include/configs/vf610twr.h
+++ b/include/configs/vf610twr.h
@@ -10,13 +10,10 @@
 #define __CONFIG_H
 
 #include <asm/arch/imx-regs.h>
-#include <config_cmd_default.h>
 
 #define CONFIG_VF610
 
-#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_SYS_FSL_CLK
 
 #define CONFIG_MACH_TYPE		4146
 
@@ -33,30 +30,20 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)
 
-#define CONFIG_BOARD_EARLY_INIT_F
-
-#define CONFIG_FSL_LPUART
-#define LPUART_BASE			UART1_BASE
-
 /* Allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_SYS_UART_PORT		(1)
 #define CONFIG_BAUDRATE			115200
 
-#undef CONFIG_CMD_IMLS
-
 /* NAND support */
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_NAND_TRIMFFS
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 
 #ifdef CONFIG_CMD_NAND
-#define CONFIG_USE_ARCH_MEMCPY
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		NFC_BASE_ADDR
 
 /* UBI */
-#define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
 #define CONFIG_RBTREE
 #define CONFIG_LZO
@@ -75,22 +62,13 @@
 					"-(rootfs)"
 #endif
 
-#define CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 #define CONFIG_SYS_FSL_ESDHC_NUM	1
 
-#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
-
-#define CONFIG_CMD_MMC
 #define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE			ENET_BASE_ADDR
@@ -100,39 +78,52 @@
 #define CONFIG_PHY_MICREL
 
 /* QSPI Configs*/
-#define CONFIG_FSL_QSPI
 
 #ifdef CONFIG_FSL_QSPI
-#define CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_SPANSION
 #define FSL_QSPI_FLASH_SIZE		(1 << 24)
 #define FSL_QSPI_FLASH_NUM		2
 #define CONFIG_SYS_FSL_QSPI_LE
 #endif
 
 /* I2C Configs */
-#define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
 #define CONFIG_SYS_SPD_BUS_NUM		0
 
-#define CONFIG_BOOTDELAY		3
 
-#define CONFIG_LOADADDR			0x82000000
+#define CONFIG_SYS_LOAD_ADDR		0x82000000
 
 /* We boot from the gfxRAM area of the OCRAM. */
 #define CONFIG_SYS_TEXT_BASE		0x3f408000
 #define CONFIG_BOARD_SIZE_LIMIT		524288
 
+/*
+ * We do have 128MB of memory on the Vybrid Tower board. Leave the last
+ * 16MB alone to avoid conflicts with Cortex-M4 firmwares running from
+ * DDR3. Hence, limit the memory range for image processing to 112MB
+ * using bootm_size. All of the following must be within this range.
+ * We have the default load at 32MB into DDR (for the kernel), FDT at
+ * 64MB and the ramdisk 512KB above that (allowing for hopefully never
+ * seen large trees). This allows a reasonable split between ramdisk
+ * and kernel size, where the ram disk can be a bit larger.
+ */
+#define MEM_LAYOUT_ENV_SETTINGS \
+	"bootm_size=0x07000000\0" \
+	"loadaddr=0x82000000\0" \
+	"kernel_addr_r=0x82000000\0" \
+	"fdt_addr=0x84000000\0" \
+	"fdt_addr_r=0x84000000\0" \
+	"rdaddr=0x84080000\0" \
+	"ramdisk_addr_r=0x84080000\0"
+
 #define CONFIG_EXTRA_ENV_SETTINGS \
+	MEM_LAYOUT_ENV_SETTINGS \
 	"script=boot.scr\0" \
 	"image=zImage\0" \
 	"console=ttyLP1\0" \
-	"fdt_high=0xffffffff\0" \
-	"initrd_high=0xffffffff\0" \
 	"fdt_file=vf610-twr.dtb\0" \
-	"fdt_addr=0x81000000\0" \
 	"boot_fdt=try\0" \
 	"ip_dyn=yes\0" \
 	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
@@ -214,8 +205,6 @@
 
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #undef CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE		\
@@ -223,12 +212,9 @@
 #define CONFIG_SYS_MAXARGS		16	/* max number of command args */
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
-#define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_MEMTEST_START	0x80010000
 #define CONFIG_SYS_MEMTEST_END		0x87C00000
 
-#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-
 /*
  * Stack sizes
  * The stack sizes are set up in start.S using the settings below
@@ -266,7 +252,4 @@
 #define CONFIG_ENV_OFFSET		0x180000
 #endif
 
-#define CONFIG_OF_LIBFDT
-#define CONFIG_CMD_BOOTZ
-
 #endif