X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fvf610twr.h;h=3ab3231943877d9f836eb38c1b26f6d03525fc85;hb=b9da77f1958aab4ec50ff2f095b40464ca2489dd;hp=ee90045cadc766fbb09ec6a8511dad492bd4ecde;hpb=02ccab1908c405fe1449457d4a0d343784a30acb;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h
index ee90045..3ab3231 100644
--- a/include/configs/vf610twr.h
+++ b/include/configs/vf610twr.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2013 Freescale Semiconductor, Inc.
  *
  * Configuration settings for the Freescale Vybrid vf610twr board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -20,11 +19,6 @@
 /* Enable passing of ATAGs */
 #define CONFIG_CMDLINE_TAG
 
-#define CONFIG_CMD_FUSE
-#ifdef CONFIG_CMD_FUSE
-#define CONFIG_MXC_OCOTP
-#endif
-
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)
 
@@ -32,44 +26,22 @@
 #define CONFIG_ENV_OVERWRITE
 
 /* NAND support */
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_NAND_TRIMFFS
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 
 #ifdef CONFIG_CMD_NAND
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		NFC_BASE_ADDR
 
-/* UBI */
-#define CONFIG_CMD_UBIFS
-#define CONFIG_RBTREE
-#define CONFIG_LZO
-
 /* Dynamic MTD partition support */
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_MTD_DEVICE
-#define MTDIDS_DEFAULT			"nand0=fsl_nfc"
-#define MTDPARTS_DEFAULT		"mtdparts=fsl_nfc:"		\
-					"128k(vf-bcb)ro,"		\
-					"1408k(u-boot)ro,"		\
-					"512k(u-boot-env),"		\
-					"4m(kernel),"			\
-					"512k(fdt),"		\
-					"-(rootfs)"
 #endif
 
-#define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 #define CONFIG_SYS_FSL_ESDHC_NUM	1
 
 #define CONFIG_FEC_MXC
-#define CONFIG_MII
 #define IMX_FEC_BASE			ENET_BASE_ADDR
 #define CONFIG_FEC_XCV_TYPE		RMII
 #define CONFIG_FEC_MXC_PHYADDR          0
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_MICREL
 
 /* QSPI Configs*/
 
@@ -90,8 +62,7 @@
 #define CONFIG_SYS_LOAD_ADDR		0x82000000
 
 /* We boot from the gfxRAM area of the OCRAM. */
-#define CONFIG_SYS_TEXT_BASE		0x3f408000
-#define CONFIG_BOARD_SIZE_LIMIT		524288
+#define CONFIG_BOARD_SIZE_LIMIT		520192
 
 /*
  * We do have 128MB of memory on the Vybrid Tower board. Leave the last
@@ -198,25 +169,11 @@
 	   "else run netboot; fi"
 
 /* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP		/* undef to save memory */
-#undef CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE		\
-			(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
 #define CONFIG_SYS_MEMTEST_START	0x80010000
 #define CONFIG_SYS_MEMTEST_END		0x87C00000
 
-/*
- * Stack sizes
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE		(128 * 1024)	/* regular stack */
-
 /* Physical memory map */
-#define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM			(0x80000000)
 #define PHYS_SDRAM_SIZE			(128 * 1024 * 1024)
 
@@ -230,17 +187,11 @@
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
 #ifdef CONFIG_ENV_IS_IN_MMC
-#define CONFIG_ENV_SIZE			(8 * 1024)
-
-#define CONFIG_ENV_OFFSET		(12 * 64 * 1024)
 #define CONFIG_SYS_MMC_ENV_DEV		0
 #endif
 
 #ifdef CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_SIZE			(64 * 2048)
-#define CONFIG_ENV_SECT_SIZE		(64 * 2048)
 #define CONFIG_ENV_RANGE		(512 * 1024)
-#define CONFIG_ENV_OFFSET		0x180000
 #endif
 
 #endif