X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fverdin-imx8mp.h;h=ce72798514800c2d7b636d09233806c1b5f57891;hb=a29491ade0adf3dbb9dc51be8b45530edde1f1df;hp=7b7407752c15c7b1e1dba2f6bf7f32b81146b178;hpb=6d73175b1f407fefc6c5a0b81ac30c6b18bcc191;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/verdin-imx8mp.h b/include/configs/verdin-imx8mp.h
index 7b74077..ce72798 100644
--- a/include/configs/verdin-imx8mp.h
+++ b/include/configs/verdin-imx8mp.h
@@ -9,54 +9,36 @@
 #include <asm/arch/imx-regs.h>
 #include <linux/sizes.h>
 
-#define CONFIG_SPL_MAX_SIZE				(152 * 1024)
 #define CONFIG_SYS_MONITOR_LEN				SZ_512K
 #define CONFIG_SYS_UBOOT_BASE	\
 	(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
 
 #ifdef CONFIG_SPL_BUILD
 /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
-#define CONFIG_SPL_STACK		0x960000
-#define CONFIG_SPL_BSS_START_ADDR	0x0098fc00
-#define CONFIG_SPL_BSS_MAX_SIZE		SZ_1K
-#define CONFIG_SYS_SPL_MALLOC_START	0x42200000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	SZ_512K
 
 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
 #define CONFIG_MALLOC_F_ADDR				0x184000
 /* For RAW image gives a error info not panic */
-#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
 
 #define CONFIG_POWER_PCA9450
 
 #define CONFIG_SYS_I2C
 #endif /* CONFIG_SPL_BUILD */
 
-/* ENET Config */
-/* ENET1 */
-#if defined(CONFIG_CMD_NET)
-#define CONFIG_FEC_MXC_PHYADDR		7
-#define FEC_QUIRK_ENET_MAC
-
-#define PHY_ANEG_TIMEOUT 20000
-#endif /* CONFIG_CMD_NET */
-
 #define MEM_LAYOUT_ENV_SETTINGS \
-	"fdt_addr_r=0x43000000\0" \
-	"kernel_addr_r=0x40000000\0" \
-	"ramdisk_addr_r=0x46400000\0" \
-	"scriptaddr=0x46000000\0"
+	"fdt_addr_r=0x50200000\0" \
+	"kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+	"kernel_comp_addr_r=0x40200000\0" \
+	"kernel_comp_size=0x08000000\0" \
+	"ramdisk_addr_r=0x50300000\0" \
+	"scriptaddr=0x50280000\0"
 
 /* Enable Distro Boot */
-#ifndef CONFIG_SPL_BUILD
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 1) \
 	func(MMC, mmc, 2) \
 	func(DHCP, dhcp, na)
 #include <config_distro_bootcmd.h>
-#else
-#define BOOTENV
-#endif
 
 #if defined(CONFIG_TDX_EASY_INSTALLER)
 #  define BOOT_SCRIPT	"boot-tezi.scr"
@@ -76,7 +58,7 @@
 	"fdt_board=dev\0" \
 	"initrd_addr=0x43800000\0" \
 	"initrd_high=0xffffffffffffffff\0" \
-	"setup=setenv setupargs console=${console},${baudrate} console=tty1 " \
+	"setup=setenv setupargs console=tty1 console=${console},${baudrate} " \
 		"consoleblank=0 earlycon\0" \
 	"update_uboot=askenv confirm Did you load flash.bin (y/N)?; " \
 		"if test \"$confirm\" = \"y\"; then " \
@@ -86,12 +68,6 @@
 
 #define CONFIG_SYS_INIT_RAM_ADDR	0x40000000
 #define CONFIG_SYS_INIT_RAM_SIZE	SZ_512K
-#define CONFIG_SYS_INIT_SP_OFFSET \
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-#define CONFIG_SYS_BOOTM_LEN		SZ_64M /* Increase max gunzip size */
 
 /* i.MX 8M Plus supports max. 8GB memory in two albeit concecutive banks */
 #define CONFIG_SYS_SDRAM_BASE		0x40000000
@@ -100,14 +76,4 @@
 #define PHYS_SDRAM_2			0x100000000
 #define PHYS_SDRAM_2_SIZE		(SZ_4G + SZ_1G)
 
-/* UART */
-#define CONFIG_MXC_UART_BASE		UART3_BASE_ADDR
-
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE		SZ_2K
-#define CONFIG_SYS_MAXARGS		64
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-
 #endif /* __VERDIN_IMX8MP_H */