X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fverdin-imx8mm.h;h=de84e3b66350968b44560daf1342be45f98b61a1;hb=d2e5250be49fce4653689c41a5dc7e2d7e7ecf33;hp=25fa7937df83a954c318fdf20402a016bffdc916;hpb=acc415ac60d1741a3b1496ab1d3e58232bac6174;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h
index 25fa793..de84e3b 100644
--- a/include/configs/verdin-imx8mm.h
+++ b/include/configs/verdin-imx8mm.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2020 Toradex
+ * Copyright 2020-2021 Toradex
  */
 
 #ifndef __VERDIN_IMX8MM_H
@@ -11,11 +11,11 @@
 
 #define CONFIG_SPL_MAX_SIZE		(148 * 1024)
 #define CONFIG_SYS_MONITOR_LEN		SZ_512K
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300
 #define CONFIG_SYS_UBOOT_BASE	\
 	(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
 
+#define CONFIG_SYS_BOOTM_LEN           SZ_64M
+
 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_SPL_STACK		0x920000
 #define CONFIG_SPL_BSS_START_ADDR	0x910000
@@ -35,9 +35,6 @@
 	"ramdisk_addr_r=0x46400000\0" \
 	"scriptaddr=0x46000000\0"
 
-#define CONFIG_LOADADDR		0x40480000
-#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-
 /* Enable Distro Boot */
 #ifndef CONFIG_SPL_BUILD
 #define BOOT_TARGET_DEVICES(func) \
@@ -55,16 +52,16 @@
 	BOOTENV \
 	MEM_LAYOUT_ENV_SETTINGS \
 	"bootcmd_mfg=fastboot 0\0" \
+	"boot_file=Image\0" \
 	"console=ttymxc0\0" \
 	"fdt_addr=0x43000000\0" \
-	"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
+	"fdt_board=dev\0" \
 	"initrd_addr=0x43800000\0" \
 	"initrd_high=0xffffffffffffffff\0" \
-	"kernel_image=Image\0" \
 	"netargs=setenv bootargs console=${console},${baudrate} " \
 		"root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp" \
 		"\0" \
-	"nfsboot=run netargs; dhcp ${loadaddr} ${kernel_image}; " \
+	"nfsboot=run netargs; dhcp ${loadaddr} ${boot_file}; " \
 		"tftp ${fdt_addr} verdin/${fdtfile}; " \
 		"booti ${loadaddr} - ${fdt_addr}\0" \
 	"setup=setenv setupargs console=${console},${baudrate} " \
@@ -84,12 +81,8 @@
 
 #if defined(CONFIG_ENV_IS_IN_MMC)
 /* Environment in eMMC, before config block at the end of 1st "boot sector" */
-#define CONFIG_SYS_MMC_ENV_DEV		0	/* USDHC1 eMMC */
-#define CONFIG_SYS_MMC_ENV_PART	1
 #endif
 
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		SZ_32M
 #define CONFIG_SYS_SDRAM_BASE           0x40000000
 
 /* SDRAM configuration */
@@ -100,25 +93,23 @@
 #define CONFIG_MXC_UART_BASE		UART1_BASE_ADDR
 
 /* Monitor Command Prompt */
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #define CONFIG_SYS_CBSIZE		SZ_2K
 #define CONFIG_SYS_MAXARGS		64
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
 					sizeof(CONFIG_SYS_PROMPT) + 16)
 /* USDHC */
-#define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_USDHC_NUM	2
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
-#define CONFIG_SYS_MMC_IMG_LOAD_PART	1
-#define CONFIG_SYS_I2C_SPEED		100000
 
 /* ENET */
-#define CONFIG_ETHPRIME                 "FEC"
-#define CONFIG_FEC_XCV_TYPE             RGMII
 #define CONFIG_FEC_MXC_PHYADDR          7
 #define FEC_QUIRK_ENET_MAC
 #define IMX_FEC_BASE			0x30BE0000
 
-#endif /*_VERDIN_IMX8MM_H */
+/* USB Configs */
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 
+#endif /* __VERDIN_IMX8MM_H */