X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fverdin-imx8mm.h;h=8cb1f1aff353217812fda07f962ffcf253a91ec9;hb=78f67f11a9920ef988cbff5341616695c3e87ebd;hp=4811e98810bc607587d45b35913eb9e88969af25;hpb=0e14cdfaf3ce3e716a993554c8803e39640f0168;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h
index 4811e98..8cb1f1a 100644
--- a/include/configs/verdin-imx8mm.h
+++ b/include/configs/verdin-imx8mm.h
@@ -9,108 +9,64 @@
 #include <asm/arch/imx-regs.h>
 #include <linux/sizes.h>
 
-#define CONFIG_SPL_MAX_SIZE		(148 * 1024)
-#define CONFIG_SYS_MONITOR_LEN		SZ_512K
-#define CONFIG_SYS_UBOOT_BASE	\
+#define CFG_SYS_UBOOT_BASE	\
 	(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
 
-#define CONFIG_SYS_BOOTM_LEN           SZ_64M
-
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_STACK		0x920000
-#define CONFIG_SPL_BSS_START_ADDR	0x910000
-#define CONFIG_SPL_BSS_MAX_SIZE		SZ_8K	/* 8 KB */
-#define CONFIG_SYS_SPL_MALLOC_START	0x42200000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	SZ_512K	/* 512 KB */
-
 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
-#define CONFIG_MALLOC_F_ADDR		0x930000
+#define CFG_MALLOC_F_ADDR		0x930000
 /* For RAW image gives a error info not panic */
-#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
 #endif
 
 #define MEM_LAYOUT_ENV_SETTINGS \
-	"fdt_addr_r=0x44000000\0" \
-	"kernel_addr_r=0x42000000\0" \
-	"ramdisk_addr_r=0x46400000\0" \
-	"scriptaddr=0x46000000\0"
+	"fdt_addr_r=0x50200000\0" \
+	"kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+	"kernel_comp_addr_r=0x40200000\0" \
+	"kernel_comp_size=0x08000000\0" \
+	"ramdisk_addr_r=0x50300000\0" \
+	"scriptaddr=0x50280000\0"
 
 /* Enable Distro Boot */
-#ifndef CONFIG_SPL_BUILD
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 1) \
 	func(MMC, mmc, 0) \
 	func(DHCP, dhcp, na)
 #include <config_distro_bootcmd.h>
-#undef CONFIG_ISO_PARTITION
-#else
-#define BOOTENV
-#endif
 
 /* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
 	BOOTENV \
 	MEM_LAYOUT_ENV_SETTINGS \
 	"bootcmd_mfg=fastboot 0\0" \
 	"boot_file=Image\0" \
+	"boot_script_dhcp=boot.scr\0" \
 	"console=ttymxc0\0" \
 	"fdt_addr=0x43000000\0" \
 	"fdt_board=dev\0" \
 	"initrd_addr=0x43800000\0" \
 	"initrd_high=0xffffffffffffffff\0" \
-	"netargs=setenv bootargs console=${console},${baudrate} " \
-		"root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp" \
-		"\0" \
-	"nfsboot=run netargs; dhcp ${loadaddr} ${boot_file}; " \
-		"tftp ${fdt_addr} verdin/${fdtfile}; " \
-		"booti ${loadaddr} - ${fdt_addr}\0" \
-	"setup=setenv setupargs console=${console},${baudrate} " \
-		"console=tty1 consoleblank=0 earlycon\0" \
+	"setup=setenv setupargs console=tty1 console=${console},${baudrate} " \
+		"consoleblank=0 earlycon\0" \
 	"update_uboot=askenv confirm Did you load flash.bin (y/N)?; " \
 		"if test \"$confirm\" = \"y\"; then " \
 		"setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \
 		"${blkcnt} / 0x200; mmc dev 0 1; mmc write ${loadaddr} 0x2 " \
 		"${blkcnt}; fi\0"
 
-#define CONFIG_SYS_INIT_RAM_ADDR        0x40000000
-#define CONFIG_SYS_INIT_RAM_SIZE        SZ_2M
-#define CONFIG_SYS_INIT_SP_OFFSET \
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+#define CFG_SYS_INIT_RAM_ADDR        0x40000000
+#define CFG_SYS_INIT_RAM_SIZE        SZ_2M
 
 #if defined(CONFIG_ENV_IS_IN_MMC)
 /* Environment in eMMC, before config block at the end of 1st "boot sector" */
 #endif
 
-#define CONFIG_SYS_SDRAM_BASE           0x40000000
+#define CFG_SYS_SDRAM_BASE           0x40000000
 
 /* SDRAM configuration */
 #define PHYS_SDRAM                      0x40000000
 #define PHYS_SDRAM_SIZE			SZ_2G /* 2GB DDR */
 
-/* UART */
-#define CONFIG_MXC_UART_BASE		UART1_BASE_ADDR
-
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE		SZ_2K
-#define CONFIG_SYS_MAXARGS		64
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-/* USDHC */
-#define CONFIG_SYS_FSL_USDHC_NUM	2
-#define CONFIG_SYS_FSL_ESDHC_ADDR	0
-
-/* ENET */
-#define CONFIG_FEC_XCV_TYPE             RGMII
-#define CONFIG_FEC_MXC_PHYADDR          7
-#define FEC_QUIRK_ENET_MAC
-#define IMX_FEC_BASE			0x30BE0000
-
 /* USB Configs */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+#define CFG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
 
 #endif /* __VERDIN_IMX8MM_H */