X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fvct.h;h=2cb4ab149cae4ae2faf1defc7ab7e1fca9e8b355;hb=8f1a80e99e4a838d1540cdb1d59ccc7785fe4618;hp=2bc98a8e8a356838301acec278c2ae602491ba3d;hpb=bb597c0eeb7ee2f6e983577d993c76a30dd3c2b4;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/vct.h b/include/configs/vct.h
index 2bc98a8..2cb4ab1 100644
--- a/include/configs/vct.h
+++ b/include/configs/vct.h
@@ -25,8 +25,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_DISPLAY_BOARDINFO
-
 #define CPU_CLOCK_RATE			324000000 /* Clock for the MIPS core */
 #define CONFIG_SYS_MIPS_TIMER_FREQ	(CPU_CLOCK_RATE / 2)
 
@@ -40,8 +38,6 @@
 
 #if !defined(CONFIG_VCT_NAND) && !defined(CONFIG_VCT_ONENAND)
 #define CONFIG_VCT_NOR
-#else
-#define CONFIG_SYS_NO_FLASH
 #endif
 
 /*
@@ -58,7 +54,6 @@
 #define CONFIG_SYS_NS16550_COM1		UART_1_BASE
 #define CONFIG_CONS_INDEX		1
 #define CONFIG_SYS_NS16550_CLK		921600
-#define CONFIG_BAUDRATE			115200
 
 /*
  * SDRAM
@@ -82,7 +77,6 @@
 /*
  * Commands
  */
-#define CONFIG_CMD_EEPROM
 
 /*
  * Only Premium/Platinum have ethernet support right now
@@ -99,16 +93,11 @@
 #endif
 
 #if defined(CONFIG_CMD_USB)
-#define CONFIG_USB_STORAGE
-#define CONFIG_DOS_PARTITION
-#define CONFIG_ISO_PARTITION
-
 #define CONFIG_SUPPORT_VFAT
 
 /*
  * USB/EHCI
  */
-#define CONFIG_USB_EHCI			/* Enable EHCI USB support	*/
 #define CONFIG_USB_EHCI_VCT		/* on VCT platform		*/
 #define CONFIG_EHCI_MMIO_BIG_ENDIAN
 #define CONFIG_EHCI_DESC_BIG_ENDIAN
@@ -116,10 +105,6 @@
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* re-init HCD after CMD_RESET */
 #endif /* CONFIG_CMD_USB */
 
-#if defined(CONFIG_VCT_NAND)
-#define CONFIG_CMD_NAND
-#endif
-
 #if defined(CONFIG_VCT_ONENAND)
 #define CONFIG_CMD_ONENAND
 #endif
@@ -143,13 +128,11 @@
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
 #define CONFIG_TIMESTAMP			/* Print image info with timestamp */
 #define CONFIG_CMDLINE_EDITING			/* add command line history	*/
-#define CONFIG_SYS_CONSOLE_INFO_QUIET		/* don't print console @ startup*/
 
 /*
  * FLASH and environment organization
  */
 #if defined(CONFIG_VCT_NOR)
-#define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_FLASH_NOT_MEM_MAPPED
 
 /*
@@ -196,7 +179,6 @@
 
 #if defined(CONFIG_VCT_ONENAND)
 #define CONFIG_USE_ONENAND_BOARD_INIT
-#define	CONFIG_ENV_IS_IN_ONENAND
 #define	CONFIG_SYS_ONENAND_BASE		0x00000000	/* this is not real address */
 #define CONFIG_SYS_FLASH_BASE		0x00000000
 #define CONFIG_ENV_ADDR			(128 << 10)	/* after compr. U-Boot image */
@@ -245,13 +227,8 @@ int vct_gpio_get(int pin);
  * UBI configuration
  */
 #if defined(CONFIG_VCT_ONENAND)
-#define CONFIG_SYS_USE_UBI
-#define	CONFIG_CMD_JFFS2
-#define	CONFIG_CMD_UBI
-#define	CONFIG_RBTREE
 #define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
 #define CONFIG_MTD_PARTITIONS
-#define CONFIG_CMD_MTDPARTS
 
 #define MTDIDS_DEFAULT		"onenand0=onenand"
 #define MTDPARTS_DEFAULT	"mtdparts=onenand:128k(u-boot),"	\
@@ -266,12 +243,6 @@ int vct_gpio_get(int pin);
  * (NOR/OneNAND) usage and Linux kernel booting.
  */
 #if defined(CONFIG_VCT_SMALL_IMAGE)
-#undef CONFIG_CMD_BEDBUG
-#undef CONFIG_CMD_EEPROM
-#undef CONFIG_CMD_EEPROM
-#undef CONFIG_CMD_IRQ
-#undef CONFIG_CMD_LOADY
-#undef CONFIG_CMD_REGINFO
 #undef CONFIG_CMD_STRINGS
 #undef CONFIG_CMD_TERMINAL