X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fv38b.h;h=cc0007827d4de7903f9b93b2435bad92e0d905a5;hb=c9032ce168c1344fe8ffe8604825ec343ec14adf;hp=501010eb9cc8974b7fdbc64b9eff738815b36383;hpb=c2120fbfbc4d1f6953228f86be8bdbf38bacfdab;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/v38b.h b/include/configs/v38b.h
index 501010e..cc00078 100644
--- a/include/configs/v38b.h
+++ b/include/configs/v38b.h
@@ -12,7 +12,6 @@
  * High Level Configuration Options
  * (easy to change)
  */
-#define CONFIG_MPC5xxx			1	/* This is an MPC5xxx CPU */
 #define CONFIG_MPC5200			1	/* This is an MPC5200 CPU */
 #define CONFIG_V38B			1	/* ...on V38B board */
 
@@ -28,7 +27,6 @@
 #define CONFIG_NETCONSOLE		1
 
 #define CONFIG_BOARD_EARLY_INIT_R	1	/* do board-specific init */
-#define CONFIG_BOARD_EARLY_INIT_F	1	/* do board-specific init */
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_SYS_XLB_PIPELINING		1	/* gives better performance */
@@ -39,7 +37,6 @@
  * Serial console configuration
  */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
-#define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*
@@ -55,25 +52,16 @@
 #define SDRAM_TAPDELAY		0x10000000
 
 /*
- * PCI - no suport
+ * PCI - no support
  */
-#undef CONFIG_PCI
-
-/*
- * Partitions
- */
-#define CONFIG_MAC_PARTITION	1
-#define CONFIG_DOS_PARTITION	1
 
 /*
  * USB
  */
 #define CONFIG_USB_OHCI
-#define CONFIG_USB_STORAGE
 #define CONFIG_USB_CLOCK	0x0001BBBB
 #define CONFIG_USB_CONFIG	0x00001000
 
-
 /*
  * BOOTP options
  */
@@ -82,26 +70,13 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_I2C
 #define CONFIG_CMD_IDE
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MII
 #define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_FAT
-
 
 #define CONFIG_TIMESTAMP		/* Print image info with timestamp */
 
@@ -114,7 +89,6 @@
 /*
  * Autobooting
  */
-#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds */
 
 #define CONFIG_PREBOOT	"echo;"	\
 	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
@@ -149,7 +123,6 @@
 	"netmask=255.255.0.0\0"						\
 	"ipaddr=192.168.160.18\0"					\
 	"serverip=192.168.1.1\0"					\
-	"ethaddr=00:e0:ee:00:05:2e\0"					\
 	"bootfile=/tftpboot/v38b/uImage\0"				\
 	"u-boot=/tftpboot/v38b/u-boot.bin\0"				\
 	""
@@ -244,7 +217,6 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP			/* undef to save memory */
-#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
 #else
@@ -259,8 +231,6 @@
 
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 #if defined(CONFIG_CMD_KGDB)
 #  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
@@ -311,8 +281,6 @@
 /*
  * Status LED
  */
-#define  CONFIG_STATUS_LED		/* Status LED enabled */
-#define  CONFIG_BOARD_SPECIFIC_LED	/* version has board specific leds */
 
 #define CONFIG_SYS_LED_BASE	MPC5XXX_GPT7_ENABLE	/* Timer 7 GPIO */
 #ifndef __ASSEMBLY__