X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Futx8245.h;h=8f4a4702ace33ee87db15606872d69042cd4f6b1;hb=3765b3e7bd0f8e46914d417f29cbcb0c72b1acf7;hp=5aec47af6b5bf349ff0af97572af1b3d1db44c0c;hpb=c609719b8d1b2dca590e0ed499016d041203e403;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h index 5aec47a..8f4a470 100644 --- a/include/configs/utx8245.h +++ b/include/configs/utx8245.h @@ -7,23 +7,7 @@ * Matthew E. Karger, karger@arlut.utexas.edu * Applied Research Laboratories, The University of Texas at Austin * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ /* @@ -49,47 +33,89 @@ #define CONFIG_MPC824X 1 #define CONFIG_MPC8245 1 #define CONFIG_UTX8245 1 + +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 + #define DEBUG 1 +#define CONFIG_IDENT_STRING " [UTX5] " + #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 57600 -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#define CONFIG_BOOTDELAY 5 -#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n" -#define CONFIG_BOOTCOMMAND "bootm FF920000 FF800000" /* autoboot command */ +#define CONFIG_BOOTDELAY 2 +#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n", bootdelay +#define CONFIG_BOOTCOMMAND "run nfsboot" /* autoboot command */ #define CONFIG_BOOTARGS "root=/dev/ram console=ttyS0,57600" /* RAMdisk */ -#define CONFIG_ETHADDR 41:52:4c:61:00:01 /* MAC address */ -#define CONFIG_SERVERIP 10.8.17.105 +#define CONFIG_ETHADDR 00:AA:00:14:00:05 /* UTX5 */ +#define CONFIG_SERVERIP 10.8.17.105 /* Spree */ + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "kernel_addr=FFA00000\0" \ + "ramdisk_addr=FF800000\0" \ + "u-boot_startaddr=FFB00000\0" \ + "u-boot_endaddr=FFB2FFFF\0" \ + "nfsargs=setenv bootargs console=ttyS0,${baudrate} root=/dev/nfs rw \ +nfsroot=${nfsrootip}:${rootpath} ip=dhcp\0" \ + "ramargs=setenv bootargs console=ttyS0,${baudrate} root=/dev/ram0\0" \ + "smargs=setenv bootargs console=ttyS0,${baudrate} root=/dev/mtdblock1 ro\0" \ + "fwargs=setenv bootargs console=ttyS0,${baudrate} root=/dev/sda2 ro\0" \ + "nfsboot=run nfsargs;bootm ${kernel_addr}\0" \ + "ramboot=run ramargs;bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "smboot=run smargs;bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "fwboot=run fwargs;bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "update_u-boot=tftp ${loadaddr} /bdi2000/u-boot.bin;protect off \ +${u-boot_startaddr} ${u-boot_endaddr};era ${u-boot_startaddr} \ +${u-boot_endaddr};cp.b ${loadaddr} ${u-boot_startaddr} ${filesize};\ +protect on ${u-boot_startaddr} ${u-boot_endaddr}" + #define CONFIG_ENV_OVERWRITE -#define CONFIG_COMMANDS (CFG_CMD_DFL | CFG_CMD_BDI | CFG_CMD_PCI \ - | CFG_CMD_FLASH | CFG_CMD_MEMORY \ - | CFG_CMD_ENV | CFG_CMD_CONSOLE \ - | CFG_CMD_LOADS | CFG_CMD_LOADB \ - | CFG_CMD_IMI | CFG_CMD_CACHE \ - | CFG_CMD_RUN | CFG_CMD_ECHO \ - | CFG_CMD_REGINFO | CFG_CMD_NET\ - | CFG_CMD_DHCP) -/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. */ -#include +#include + +#define CONFIG_CMD_BDI +#define CONFIG_CMD_PCI +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_SAVEENV +#define CONFIG_CMD_CONSOLE +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_IMI +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_NET +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_I2C +#define CONFIG_CMD_DATE /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_LOAD_ADDR 0x00100000 /* Default load address */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* Default load address */ /*----------------------------------------------------------------------- @@ -97,66 +123,83 @@ *----------------------------------------------------------------------- */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ #undef CONFIG_PCI_PNP #define CONFIG_PCI_SCAN_SHOW -#define CONFIG_NET_MULTI #define CONFIG_EEPRO100 +#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ +#define CONFIG_EEPRO100_SROM_WRITE -#define PCI_ENET0_IOADDR 0x80000000 +#define PCI_ENET0_IOADDR 0xF0000000 +#define PCI_ENET0_MEMADDR 0xF0000000 + +#define PCI_FIREWIRE_IOADDR 0xF1000000 +#define PCI_FIREWIRE_MEMADDR 0xF1000000 +/* +#define PCI_ENET0_IOADDR 0xFE000000 #define PCI_ENET0_MEMADDR 0x80000000 + #define PCI_FIREWIRE_IOADDR 0x81000000 #define PCI_FIREWIRE_MEMADDR 0x81000000 - +*/ /*----------------------------------------------------------------------- * Start addresses for the final memory configuration * (Set up by the startup code) - * Please note that CFG_SDRAM_BASE _must_ start at 0 + * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 */ -#define CFG_SDRAM_BASE 0x00000000 -#define CFG_MAX_RAM_SIZE 0x10000000 /* amount of SDRAM */ - - -/* even though FLASHP_BASE is FF800000, with 2MB on RCS0, the - * reset vector is actually located at FF800100, but the 8245 - * takes care of us. +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_MAX_RAM_SIZE 0x10000000 /* 256MB */ +/*#define CONFIG_SYS_VERY_BIG_RAM 1 */ + +/* FLASH_BASE is FF800000, with 4MB on RCS0, but the reset vector + * is actually located at FFF00100. Therefore, U-Boot is + * physically located at 0xFFB0_0000, but is also mirrored at + * 0xFFF0_0000. */ -#define CFG_RESET_ADDRESS 0xFFF00100 +#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 -#define CFG_EUMB_ADDR 0xFC000000 +#define CONFIG_SYS_EUMB_ADDR 0xFC000000 -#define CFG_MONITOR_BASE TEXT_BASE +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -/*#define CFG_DRAM_TEST 1 */ -#define CFG_MEMTEST_START 0x00003000 /* memtest works on 0...256 MB */ -#define CFG_MEMTEST_END 0x0ff8ffa8 /* in SDRAM, skips exception */ +/*#define CONFIG_SYS_DRAM_TEST 1 */ +#define CONFIG_SYS_MEMTEST_START 0x00003000 /* memtest works on 0...256 MB */ +#define CONFIG_SYS_MEMTEST_END 0x0ff8ffa7 /* in SDRAM, skips exception */ /* vectors and U-Boot */ /*-------------------------------------------------------------------- * Definitions for initial stack pointer and data area *------------------------------------------------------------------*/ -#define CFG_GBL_DATA_SIZE 128 /* Size in bytes reserved for */ +#define CONFIG_SYS_INIT_DATA_SIZE 128 /* Size in bytes reserved for */ /* initial data */ -#define CFG_INIT_RAM_ADDR 0x40000000 -#define CFG_INIT_RAM_END 0x1000 -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 +#define CONFIG_SYS_INIT_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_INIT_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /*-------------------------------------------------------------------- * NS16550 Configuration *------------------------------------------------------------------*/ -#define CFG_NS16550 -#define CFG_NS16550_SERIAL +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL -#define CFG_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CFG_NS16550_CLK get_bus_freq(0) +#if (CONFIG_CONS_INDEX == 1 || CONFIG_CONS_INDEX == 2) +# define CONFIG_SYS_NS16550_CLK get_bus_freq(0) +#else +# define CONFIG_SYS_NS16550_CLK 33000000 +#endif -#define CFG_NS16550_COM1 (CFG_EUMB_ADDR + 0x4500) -#define CFG_NS16550_COM2 (CFG_EUMB_ADDR + 0x4600) +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_EUMB_ADDR + 0x4500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_EUMB_ADDR + 0x4600) +#define CONFIG_SYS_NS16550_COM3 0xFF000000 +#define CONFIG_SYS_NS16550_COM4 0xFF000008 /*-------------------------------------------------------------------- * Low Level Configuration Settings @@ -166,61 +209,83 @@ *------------------------------------------------------------------*/ #define CONFIG_SYS_CLK_FREQ 33000000 -#define CFG_HZ 1000 +#define CONFIG_SYS_HZ 1000 + +/*#define CONFIG_SYS_ETH_DEV_FN 0x7800 */ +/*#define CONFIG_SYS_ETH_IOBASE 0x00104000 */ -#define CFG_ETH_DEV_FN 0x7800 -#define CFG_ETH_IOBASE 0x00104000 +/*-------------------------------------------------------------------- + * I2C Configuration + *------------------------------------------------------------------*/ +#if 1 +#define CONFIG_HARD_I2C 1 /* To enable I2C support */ +#define CONFIG_SYS_I2C_SPEED 400000 +#define CONFIG_SYS_I2C_SLAVE 0x7F +#endif +#define CONFIG_RTC_PCF8563 1 /* enable I2C support for */ + /* Philips PCF8563 RTC */ +#define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* Philips PCF8563 RTC address */ /*-------------------------------------------------------------------- * Memory Control Configuration Register values * - see sec. 4.12 of MPC8245 UM *------------------------------------------------------------------*/ -/* MCCR1 */ -#define CFG_ROMNAL 0 -#define CFG_ROMFAL 2 /* (tacc=70ns)*mem_freq - 2 */ -#define CFG_BANK0_ROW 2 /* SDRAM bank 7-0 row address */ -#define CFG_BANK1_ROW 2 /* bit count */ -#define CFG_BANK2_ROW 0 -#define CFG_BANK3_ROW 0 -#define CFG_BANK4_ROW 0 -#define CFG_BANK5_ROW 0 -#define CFG_BANK6_ROW 0 -#define CFG_BANK7_ROW 0 - -/* MCCR2, refresh interval clock cycles */ -#define CFG_REFINT 480 /* 33 MHz SDRAM clock was 480 */ - -/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4 */ -#define CFG_BSTOPRE 1023 /* burst to precharge[0..9], */ +/**** MCCR1 ****/ +#define CONFIG_SYS_ROMNAL 0 +#define CONFIG_SYS_ROMFAL 10 /* (tacc=70ns)*mem_freq - 2, + mem_freq = 100MHz */ + +#define CONFIG_SYS_BANK7_ROW 0 /* SDRAM bank 7-0 row address */ +#define CONFIG_SYS_BANK6_ROW 0 /* bit count */ +#define CONFIG_SYS_BANK5_ROW 0 +#define CONFIG_SYS_BANK4_ROW 0 +#define CONFIG_SYS_BANK3_ROW 0 +#define CONFIG_SYS_BANK2_ROW 0 +#define CONFIG_SYS_BANK1_ROW 2 +#define CONFIG_SYS_BANK0_ROW 2 + +/**** MCCR2, refresh interval clock cycles ****/ +#define CONFIG_SYS_REFINT 480 /* 33 MHz SDRAM clock was 480 */ + +/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. */ +#define CONFIG_SYS_BSTOPRE 1023 /* burst to precharge[0..9], */ /* sets open page interval */ -/* MCCR3 */ -#define CFG_REFREC 5 /* Refresh to activate interval, trc */ +/**** MCCR3 ****/ +#define CONFIG_SYS_REFREC 7 /* Refresh to activate interval, trc */ -/* MCCR4 */ -#define CFG_PRETOACT 2 /* trp */ -#define CFG_ACTTOPRE 7 /* trcd + (burst length - 1) + tdrl */ -#define CFG_SDMODE_CAS_LAT 3 /* SDMODE CAS latancy */ -#define CFG_SDMODE_WRAP 0 /* SDMODE wrap type, sequential */ -#define CFG_ACTORW 2 /* trcd min */ -#define CFG_DBUS_SIZE2 1 /* set for 8-bit RCS1, clear for 32,64 */ -#define CFG_REGISTERD_TYPE_BUFFER 1 -#define CFG_EXTROM 1 -#define CFG_REGDIMM 0 +/**** MCCR4 ****/ +#define CONFIG_SYS_PRETOACT 2 /* trp */ +#define CONFIG_SYS_ACTTOPRE 7 /* trcd + (burst length - 1) + trdl */ +#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* SDMODE CAS latancy */ +#define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE wrap type, sequential */ +#define CONFIG_SYS_ACTORW 2 /* trcd min */ +#define CONFIG_SYS_DBUS_SIZE2 1 /* set for 8-bit RCS1, clear for 32,64 */ +#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1 +#define CONFIG_SYS_EXTROM 0 /* we don't need extended ROM space */ +#define CONFIG_SYS_REGDIMM 0 /* calculate according to formula in sec. 6-22 of 8245 UM */ -#define CFG_PGMAX 50 /* how long the 8245 retains the */ +#define CONFIG_SYS_PGMAX 50 /* how long the 8245 retains the */ /* currently accessed page in memory */ /* was 45 */ -#define CFG_SDRAM_DSCD 0x20 /* SDRAM data in sample clock delay - note */ - /* bottom 3 bits MUST be 0 */ +#define CONFIG_SYS_SDRAM_DSCD 0x20 /* SDRAM data in sample clock delay - note */ + /* bits 7,6, and 3-0 MUST be 0 */ -#define CFG_DLL_MAX_DELAY 0x04 -#define CFG_DLL_EXTEND 0x80 -#define CFG_PCI_HOLD_DEL 0x20 +#if 0 +#define CONFIG_SYS_DLL_MAX_DELAY 0x04 +#else +#define CONFIG_SYS_DLL_MAX_DELAY 0 +#endif +#if 0 /* need for 33MHz SDRAM */ +#define CONFIG_SYS_DLL_EXTEND 0x80 +#else +#define CONFIG_SYS_DLL_EXTEND 0 +#endif +#define CONFIG_SYS_PCI_HOLD_DEL 0x20 /* Memory bank settings. @@ -230,117 +295,117 @@ * address. Refer to the MPC8245 user manual. */ -#define CFG_BANK0_START 0x00000000 -#define CFG_BANK0_END (CFG_MAX_RAM_SIZE/2 - 1) -#define CFG_BANK0_ENABLE 1 -#define CFG_BANK1_START CFG_MAX_RAM_SIZE/2 -#define CFG_BANK1_END (CFG_MAX_RAM_SIZE - 1) -#define CFG_BANK1_ENABLE 1 -#define CFG_BANK2_START 0x3ff00000 /* not available in this design */ -#define CFG_BANK2_END 0x3fffffff -#define CFG_BANK2_ENABLE 0 -#define CFG_BANK3_START 0x3ff00000 -#define CFG_BANK3_END 0x3fffffff -#define CFG_BANK3_ENABLE 0 -#define CFG_BANK4_START 0x3ff00000 -#define CFG_BANK4_END 0x3fffffff -#define CFG_BANK4_ENABLE 0 -#define CFG_BANK5_START 0x3ff00000 -#define CFG_BANK5_END 0x3fffffff -#define CFG_BANK5_ENABLE 0 -#define CFG_BANK6_START 0x3ff00000 -#define CFG_BANK6_END 0x3fffffff -#define CFG_BANK6_ENABLE 0 -#define CFG_BANK7_START 0x3ff00000 -#define CFG_BANK7_END 0x3fffffff -#define CFG_BANK7_ENABLE 0 - -/*-------------------------------------------------------------------- - * 4.4 - Output Driver Control Register - *------------------------------------------------------------------*/ -#define CFG_ODCR 0xe5 - -/*-------------------------------------------------------------------- - * 4.8 - Error Handling Registers - *------------------------------------------------------------------*/ -#define CFG_ERRENR1 0x11 /* enable SDRAM refresh overflow error */ +#define CONFIG_SYS_BANK0_START 0x00000000 +#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE/2 - 1) +#define CONFIG_SYS_BANK0_ENABLE 1 +#define CONFIG_SYS_BANK1_START CONFIG_SYS_MAX_RAM_SIZE/2 +#define CONFIG_SYS_BANK1_END (CONFIG_SYS_MAX_RAM_SIZE - 1) +#define CONFIG_SYS_BANK1_ENABLE 1 +#define CONFIG_SYS_BANK2_START 0x3ff00000 /* not available in this design */ +#define CONFIG_SYS_BANK2_END 0x3fffffff +#define CONFIG_SYS_BANK2_ENABLE 0 +#define CONFIG_SYS_BANK3_START 0x3ff00000 +#define CONFIG_SYS_BANK3_END 0x3fffffff +#define CONFIG_SYS_BANK3_ENABLE 0 +#define CONFIG_SYS_BANK4_START 0x3ff00000 +#define CONFIG_SYS_BANK4_END 0x3fffffff +#define CONFIG_SYS_BANK4_ENABLE 0 +#define CONFIG_SYS_BANK5_START 0x3ff00000 +#define CONFIG_SYS_BANK5_END 0x3fffffff +#define CONFIG_SYS_BANK5_ENABLE 0 +#define CONFIG_SYS_BANK6_START 0x3ff00000 +#define CONFIG_SYS_BANK6_END 0x3fffffff +#define CONFIG_SYS_BANK6_ENABLE 0 +#define CONFIG_SYS_BANK7_START 0x3ff00000 +#define CONFIG_SYS_BANK7_END 0x3fffffff +#define CONFIG_SYS_BANK7_ENABLE 0 + +/*--------------------------------------------------------------------*/ +/* 4.4 - Output Driver Control Register */ +/*--------------------------------------------------------------------*/ +#define CONFIG_SYS_ODCR 0xe5 + +/*--------------------------------------------------------------------*/ +/* 4.8 - Error Handling Registers */ +/*-------------------------------CONFIG_SYS_SDMODE_BURSTLEN-------------------------------------*/ +#define CONFIG_SYS_ERRENR1 0x11 /* enable SDRAM refresh overflow error */ /* SDRAM 0-256 MB */ -#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +/*#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_CACHEINHIBIT) */ +#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) /* stack in dcache */ -#define CFG_IBAT1L (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CFG_IBAT1U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) + + +#define CONFIG_SYS_IBAT2L (CONFIG_SYS_SDRAM_BASE + 0x10000000 | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT2U (CONFIG_SYS_SDRAM_BASE + 0x10000000| BATU_BL_256M | BATU_VS | BATU_VP) /* PCI memory */ -#define CFG_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CFG_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -/* Flash, config addrs, etc. */ -#define CFG_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CFG_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CFG_DBAT0L CFG_IBAT0L -#define CFG_DBAT0U CFG_IBAT0U -#define CFG_DBAT1L CFG_IBAT1L -#define CFG_DBAT1U CFG_IBAT1U -#define CFG_DBAT2L CFG_IBAT2L -#define CFG_DBAT2U CFG_IBAT2U -#define CFG_DBAT3L CFG_IBAT3L -#define CFG_DBAT3U CFG_IBAT3U +/*#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) */ +/*#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) */ + +/*Flash, config addrs, etc. */ +#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) + +#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L +#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U +#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L +#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U +#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L +#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U +#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L +#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /*----------------------------------------------------------------------- - * FLASH organization (AMD AM29LV116D) - */ -#define CFG_FLASH_BASE 0xFF800000 - -#define CFG_MAX_FLASH_BANKS 1 /* Max number of flash banks */ -#define CFG_MAX_FLASH_SECT 35 /* Max number of sectors in one bank */ - -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - - /* Warning: environment is not EMBEDDED in the U-Boot code. - * It's stored in flash separately. - */ -#define CFG_ENV_IS_IN_FLASH 1 - -#define CFG_ENV_ADDR 0xFF9FA000 /* flash sector SA33 */ -#define CFG_ENV_SIZE 0x2000 /* Size of the Environment */ -#define CFG_ENV_OFFSET 0 /* starting right at the beginning */ -#define CFG_ENV_SECT_SIZE 0x2000 /* Size of the Environment Sector */ - - -#if CFG_MONITOR_BASE >= CFG_FLASH_BASE -#undef CFG_RAMBOOT + * FLASH organization + *----------------------------------------------------------------------*/ +#define CONFIG_SYS_FLASH_BASE 0xFF800000 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of flash banks */ + +/* NOTE: environment is not EMBEDDED in the u-boot code. + It's stored in flash in its own separate sector. */ +#define CONFIG_ENV_IS_IN_FLASH 1 + +#if 1 /* AMD AM29LV033C */ +#define CONFIG_SYS_MAX_FLASH_SECT 64 /* Max number of sectors in one bank */ +#define CONFIG_ENV_ADDR 0xFFBF0000 /* flash sector SA63 */ +#define CONFIG_ENV_SECT_SIZE (64*1024) /* Size of the Environment Sector */ +#else /* AMD AM29LV116D */ +#define CONFIG_SYS_MAX_FLASH_SECT 35 /* Max number of sectors in one bank */ +#define CONFIG_ENV_ADDR 0xFF9FA000 /* flash sector SA33 */ +#define CONFIG_ENV_SECT_SIZE (8*1024) /* Size of the Environment Sector */ +#endif /* #if */ + +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE /* Size of the Environment */ +#define CONFIG_ENV_OFFSET 0 /* starting right at the beginning */ + +#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE +#undef CONFIG_SYS_RAMBOOT #else -#define CFG_RAMBOOT +#define CONFIG_SYS_RAMBOOT #endif /*----------------------------------------------------------------------- * Cache Configuration */ -#define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#define CONFIG_SYS_CACHELINE_SIZE 32 +#if defined(CONFIG_CMD_KGDB) +# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif -/* - * Internal Definitions - * - * Boot Flags - */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ - - #endif /* __CONFIG_H */