X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fusbarmory.h;h=4fb487bdeb150e3042f2aec3cae1710c2061424c;hb=55dabcc8f24598e2777f663de09ab55fbe1269da;hp=70bb25da4527386900349cd386916667aed3ddba;hpb=8850c5d57c10aa6431d138d426e6e105c99cc7ba;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/usbarmory.h b/include/configs/usbarmory.h
index 70bb25d..4fb487b 100644
--- a/include/configs/usbarmory.h
+++ b/include/configs/usbarmory.h
@@ -1,69 +1,50 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * USB armory MkI board configuration settings
  * http://inversepath.com/usbarmory
  *
  * Copyright (C) 2015, Inverse Path
  * Andrej Rosano <andrej@inversepath.com>
- *
- * SPDX-License-Identifier:|____GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
 #define CONFIG_SYS_FSL_CLK
-#define CONFIG_MXC_GPIO
 
 #include <asm/arch/imx-regs.h>
 
-#include <config_distro_defaults.h>
-
 /* U-Boot environment */
-#define CONFIG_ENV_OFFSET	(6 * 64 * 1024)
-#define CONFIG_ENV_SIZE		(8 * 1024)
-#define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_SYS_MMC_ENV_DEV	0
 
 /* U-Boot general configurations */
 #define CONFIG_SYS_CBSIZE	512
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS	16
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
 
 /* UART */
-#define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE	UART1_BASE
-#define CONFIG_CONS_INDEX	1
 
 /* SD/MMC */
-#define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 #define CONFIG_SYS_FSL_ESDHC_NUM	1
 
 /* USB */
-#define CONFIG_USB_EHCI_HCD
-#define CONFIG_USB_EHCI_MX5
 #define CONFIG_MXC_USB_PORT	1
 #define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS	0
 
 /* I2C */
-#define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
 #define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
 
 /* Fuse */
-#define CONFIG_CMD_FUSE
 #define CONFIG_FSL_IIM
 
 /* U-Boot memory offsets */
 #define CONFIG_LOADADDR		0x72000000
-#define CONFIG_SYS_TEXT_BASE	0x77800000
 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
 
 /* Linux boot */
-#define CONFIG_HOSTNAME		usbarmory
+#define CONFIG_HOSTNAME		"usbarmory"
 #define CONFIG_BOOTCOMMAND						\
 	"run distro_bootcmd; "						\
 	"setenv bootargs console=${console} ${bootargs_default}; "	\
@@ -90,13 +71,11 @@
 	BOOTENV
 
 #ifndef CONFIG_CMDLINE
-#define CONFIG_BOOTARGS "console=ttymxc0,115200 root=/dev/mmcblk0p1 rootwait rw"
 #define USBARMORY_FIT_PATH	"/boot/usbarmory.itb"
 #define USBARMORY_FIT_ADDR	"0x70800000"
 #endif
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM			CSD0_BASE_ADDR
 #define PHYS_SDRAM_SIZE			(gd->ram_size)
 
@@ -109,9 +88,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-#define CONFIG_SYS_MEMTEST_START	0x70000000
-#define CONFIG_SYS_MEMTEST_END		0x90000000
-
 #define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)
 
 #endif				/* __CONFIG_H */