X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fusbarmory.h;h=270f325a55e2e723f7f1c494a9a9ade40c46491f;hb=d01806a8fcbdaedcc67cead56ece572021d97ab7;hp=b32cd6a3916c37b6a4721cf6e2cbb8c611d04d70;hpb=79a34b71c943a80af5c6d9a2af736fbb37dcc14c;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/usbarmory.h b/include/configs/usbarmory.h
index b32cd6a..270f325 100644
--- a/include/configs/usbarmory.h
+++ b/include/configs/usbarmory.h
@@ -1,51 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * USB armory MkI board configuration settings
  * http://inversepath.com/usbarmory
  *
  * Copyright (C) 2015, Inverse Path
  * Andrej Rosano <andrej@inversepath.com>
- *
- * SPDX-License-Identifier:|____GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_MX53
 #define CONFIG_SYS_FSL_CLK
-#define CONFIG_MXC_GPIO
-#define CONFIG_SYS_NO_FLASH
 
 #include <asm/arch/imx-regs.h>
 
-#include <config_distro_defaults.h>
-
 /* U-Boot environment */
 #define CONFIG_ENV_OFFSET	(6 * 64 * 1024)
 #define CONFIG_ENV_SIZE		(8 * 1024)
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV	0
 
 /* U-Boot general configurations */
 #define CONFIG_SYS_CBSIZE	512
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS	16
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
 
 /* UART */
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE	UART1_BASE
-#define CONFIG_CONS_INDEX	1
-#define CONFIG_BAUDRATE		115200
 
 /* SD/MMC */
-#define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 #define CONFIG_SYS_FSL_ESDHC_NUM	1
-#define CONFIG_GENERIC_MMC
 
 /* USB */
-#define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_MX5
 #define CONFIG_MXC_USB_PORT	1
 #define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
@@ -58,16 +43,14 @@
 #define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
 
 /* Fuse */
-#define CONFIG_CMD_FUSE
 #define CONFIG_FSL_IIM
 
 /* U-Boot memory offsets */
 #define CONFIG_LOADADDR		0x72000000
-#define CONFIG_SYS_TEXT_BASE	0x77800000
 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
 
 /* Linux boot */
-#define CONFIG_HOSTNAME		usbarmory
+#define CONFIG_HOSTNAME		"usbarmory"
 #define CONFIG_BOOTCOMMAND						\
 	"run distro_bootcmd; "						\
 	"setenv bootargs console=${console} ${bootargs_default}; "	\
@@ -94,13 +77,11 @@
 	BOOTENV
 
 #ifndef CONFIG_CMDLINE
-#define CONFIG_BOOTARGS "console=ttymxc0,115200 root=/dev/mmcblk0p1 rootwait rw"
 #define USBARMORY_FIT_PATH	"/boot/usbarmory.itb"
 #define USBARMORY_FIT_ADDR	"0x70800000"
 #endif
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM			CSD0_BASE_ADDR
 #define PHYS_SDRAM_SIZE			(gd->ram_size)