X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fusbarmory.h;h=0faa656bc63afb2b927f5d6577f265ff587bbf08;hb=d2e5250be49fce4653689c41a5dc7e2d7e7ecf33;hp=f8bd34dff70f08bfdc7ec16ad455b129e9601af9;hpb=07dea2e737f78ee70e81c27d976811f0e9fdbad8;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/usbarmory.h b/include/configs/usbarmory.h
index f8bd34d..0faa656 100644
--- a/include/configs/usbarmory.h
+++ b/include/configs/usbarmory.h
@@ -1,30 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * USB armory MkI board configuration settings
  * http://inversepath.com/usbarmory
  *
  * Copyright (C) 2015, Inverse Path
  * Andrej Rosano <andrej@inversepath.com>
- *
- * SPDX-License-Identifier:|____GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_SYS_FSL_CLK
-
 #include <asm/arch/imx-regs.h>
 
 /* U-Boot environment */
-#define CONFIG_ENV_OFFSET	(6 * 64 * 1024)
-#define CONFIG_ENV_SIZE		(8 * 1024)
-#define CONFIG_SYS_MMC_ENV_DEV	0
 
 /* U-Boot general configurations */
 #define CONFIG_SYS_CBSIZE	512
 
 /* UART */
-#define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE	UART1_BASE
 
 /* SD/MMC */
@@ -32,32 +25,15 @@
 #define CONFIG_SYS_FSL_ESDHC_NUM	1
 
 /* USB */
-#define CONFIG_USB_EHCI_MX5
 #define CONFIG_MXC_USB_PORT	1
 #define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS	0
 
-/* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
-
 /* Fuse */
 #define CONFIG_FSL_IIM
 
-/* U-Boot memory offsets */
-#define CONFIG_LOADADDR		0x72000000
-#define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
-
 /* Linux boot */
-#define CONFIG_HOSTNAME		usbarmory
-#define CONFIG_BOOTCOMMAND						\
-	"run distro_bootcmd; "						\
-	"setenv bootargs console=${console} ${bootargs_default}; "	\
-	"ext2load mmc 0:1 ${kernel_addr_r} /boot/zImage; "		\
-	"ext2load mmc 0:1 ${fdt_addr_r} /boot/${fdtfile}; "		\
-	"bootz ${kernel_addr_r} - ${fdt_addr_r}"
+#define CONFIG_HOSTNAME		"usbarmory"
 
 #define BOOT_TARGET_DEVICES(func) func(MMC, mmc, 0)
 
@@ -83,7 +59,6 @@
 #endif
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM			CSD0_BASE_ADDR
 #define PHYS_SDRAM_SIZE			(gd->ram_size)
 
@@ -96,9 +71,4 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-#define CONFIG_SYS_MEMTEST_START	0x70000000
-#define CONFIG_SYS_MEMTEST_END		0x90000000
-
-#define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)
-
 #endif				/* __CONFIG_H */