X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fusbarmory.h;h=01a2bd4060f9ba0d9b2b7c6e470f610607a6bdd5;hb=43ade93bdb0c8bd57382be810a05b3793749ce85;hp=6f6666281abb6eea67081827fdd12ee6fff1071a;hpb=18fb0e3cae64b03c51db7ba8b607e9031a844b99;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/usbarmory.h b/include/configs/usbarmory.h
index 6f66662..01a2bd4 100644
--- a/include/configs/usbarmory.h
+++ b/include/configs/usbarmory.h
@@ -12,23 +12,15 @@
 #define __CONFIG_H
 
 #define CONFIG_MX53
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
 #define CONFIG_SYS_FSL_CLK
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_OF_LIBFDT
 #define CONFIG_MXC_GPIO
+#define CONFIG_SYS_NO_FLASH
 
 #include <asm/arch/imx-regs.h>
 
 #include <config_distro_defaults.h>
 
-/* U-Boot commands */
-#define CONFIG_CMD_MEMTEST
-
 /* U-Boot environment */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_SYS_NO_FLASH
 #define CONFIG_ENV_OFFSET	(6 * 64 * 1024)
 #define CONFIG_ENV_SIZE		(8 * 1024)
 #define CONFIG_ENV_IS_IN_MMC
@@ -47,24 +39,18 @@
 #define CONFIG_BAUDRATE		115200
 
 /* SD/MMC */
-#define CONFIG_CMD_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 #define CONFIG_SYS_FSL_ESDHC_NUM	1
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
 
 /* USB */
-#define CONFIG_CMD_USB
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_MX5
-#define CONFIG_USB_STORAGE
 #define CONFIG_MXC_USB_PORT	1
 #define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS	0
 
 /* I2C */
-#define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
@@ -74,17 +60,19 @@
 #define CONFIG_CMD_FUSE
 #define CONFIG_FSL_IIM
 
-/* Linux boot */
+/* U-Boot memory offsets */
 #define CONFIG_LOADADDR		0x72000000
 #define CONFIG_SYS_TEXT_BASE	0x77800000
 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
+
+/* Linux boot */
 #define CONFIG_HOSTNAME		usbarmory
 #define CONFIG_BOOTCOMMAND						\
 	"run distro_bootcmd; "						\
 	"setenv bootargs console=${console} ${bootargs_default}; "	\
-	"ext2load mmc 0:1 ${kernel_addr_r} /boot/uImage; "		\
+	"ext2load mmc 0:1 ${kernel_addr_r} /boot/zImage; "		\
 	"ext2load mmc 0:1 ${fdt_addr_r} /boot/${fdtfile}; "		\
-	"bootm ${kernel_addr_r} - ${fdt_addr_r}"
+	"bootz ${kernel_addr_r} - ${fdt_addr_r}"
 
 #define BOOT_TARGET_DEVICES(func) func(MMC, mmc, 0)
 
@@ -104,6 +92,12 @@
 	"console=ttymxc0,115200\0"				\
 	BOOTENV
 
+#ifndef CONFIG_CMDLINE
+#define CONFIG_BOOTARGS "console=ttymxc0,115200 root=/dev/mmcblk0p1 rootwait rw"
+#define USBARMORY_FIT_PATH	"/boot/usbarmory.itb"
+#define USBARMORY_FIT_ADDR	"0x70800000"
+#endif
+
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM			CSD0_BASE_ADDR