X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fusb_a9263.h;h=ffa69009a128ebf1140a2586d823083e43ccbe0e;hb=be7dbb60c5bfa38ea444fe7de1dca8bd35f83f5b;hp=335ce4e12e70f321fb2bcfebb1e64148d3af6b08;hpb=2218b32d88f9b4b4484cea9a8b034ddab0be298b;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/usb_a9263.h b/include/configs/usb_a9263.h
index 335ce4e..ffa6900 100644
--- a/include/configs/usb_a9263.h
+++ b/include/configs/usb_a9263.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2007-2013
  * Stelian Pop <stelian.pop@leadtechdesign.com>
@@ -9,8 +10,6 @@
  *
  * U-Boot image has to be less than 200704 bytes, otherwise at91bootstrap
  * installed on board will not be able to load it properly.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -21,62 +20,23 @@
 #define CONFIG_SYS_AT91_MAIN_CLOCK	12000000	/* 12 MHz crystal */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768
 
-#define CONFIG_MACH_TYPE		MACH_TYPE_USB_A9263
-
-#define CONFIG_ARCH_CPU_INIT
-
-#define CONFIG_CMDLINE_TAG	/* enable passing of ATAGs      */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-#define CONFIG_SYS_TEXT_BASE		0x23f00000
-
 /*
  * Hardware drivers
  */
-#define CONFIG_AT91_GPIO
-
-/* serial console */
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE		ATMEL_BASE_DBGU
-#define CONFIG_USART_ID			ATMEL_ID_SYS
-
-
 /*
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_NAND
 
 /* SDRAM */
-#define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_SDRAM_BASE		ATMEL_BASE_CS1
 #define CONFIG_SYS_SDRAM_SIZE		0x04000000
 
 #define CONFIG_SYS_INIT_SP_ADDR \
-	(ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE)
-
-/* DataFlash */
-#define CONFIG_ATMEL_DATAFLASH_SPI
-#define CONFIG_HAS_DATAFLASH
-#define CONFIG_SYS_MAX_DATAFLASH_BANKS		1
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000
-#define AT91_SPI_CLK				8000000
-#define DATAFLASH_TCSS				(0x1a << 16)
-#define DATAFLASH_TCHS				(0x1 << 24)
+	(ATMEL_BASE_SRAM1 + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
 
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_ATMEL
 #define CONFIG_SYS_MAX_NAND_DEVICE		1
 #define CONFIG_SYS_NAND_BASE			ATMEL_BASE_CS3
 /* our ALE is AD21 */
@@ -87,11 +47,7 @@
 #define CONFIG_SYS_NAND_READY_PIN		GPIO_PIN_PA(22)
 #endif
 
-#define MTDPARTS_DEFAULT \
-	"mtdparts=atmel_nand:16m(kernel)ro,120m(root1),-(root2)"
-
 /* Ethernet */
-#define CONFIG_MACB
 #define CONFIG_RMII
 #define CONFIG_NET_RETRY_COUNT			20
 #define CONFIG_AT91_WANTS_COMMON_PHY
@@ -106,36 +62,8 @@
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
 #endif
 
-#define CONFIG_SYS_LOAD_ADDR			0x22000000
-
-#define CONFIG_SYS_MEMTEST_START		CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END			0x23e00000
-
-/* bootstrap + u-boot + env in dataflash on CS0 */
-#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x4000)
-#define CONFIG_ENV_OFFSET	0x2000
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \
-				 CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SIZE		0x2000
-#define CONFIG_BOOTCOMMAND	"nboot 21000000 0"
-#define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
-	"root=/dev/mtdblock1 " \
-	"mtdparts=" MTDPARTS_DEFAULT " " \
-	"rw rootfstype=jffs2"
+/* bootstrap + u-boot + env + linux in dataflash on CS0 */
 #define CONFIG_EXTRA_ENV_SETTINGS \
-	"mtdparts=" MTDPARTS_DEFAULT "\0" \
-
-#define CONFIG_SYS_CBSIZE		256
-#define CONFIG_SYS_MAXARGS		16
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					 sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_LONGHELP
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN	ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 
 #endif