X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fudoo_neo.h;h=23a3685bcd556ece71e7bd41a886c09f5d815c74;hb=0ff27d4a94637d4b1937c625d33212375bd118d9;hp=81e04810eb5754a37f568ef4e5b872ad78b3ec45;hpb=792f186846672140deca7dfbf2f20aece26b5348;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/udoo_neo.h b/include/configs/udoo_neo.h
index 81e0481..23a3685 100644
--- a/include/configs/udoo_neo.h
+++ b/include/configs/udoo_neo.h
@@ -18,8 +18,6 @@
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(3 * SZ_1M)
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
 #define CONFIG_MXC_UART
 
 /* MMC Configuration */
@@ -27,41 +25,39 @@
 
 /* Command definition */
 #define CONFIG_MXC_UART_BASE		UART1_BASE
-#define CONFIG_SYS_FSL_USDHC_NUM	2
 #define CONFIG_SYS_MMC_ENV_DEV		0  /*USDHC2*/
 
 /* Linux only */
 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 #define CONFIG_EXTRA_ENV_SETTINGS \
-	"console=ttymxc0,115200\0" \
 	"fdt_high=0xffffffff\0" \
 	"initrd_high=0xffffffff\0" \
-	"fdt_file=undefined\0" \
+	"fdtfile=undefined\0" \
 	"fdt_addr=0x83000000\0" \
+	"fdt_addr_r=0x83000000\0" \
 	"ip_dyn=yes\0" \
 	"mmcdev=0\0" \
 	"mmcrootfstype=ext4\0" \
-	"mmcautodetect=no\0" \
 	"findfdt="\
 		"if test $board_name = BASIC; then " \
-			"setenv fdt_file imx6sx-udoo-neo-basic.dtb; fi; " \
+			"setenv fdtfile imx6sx-udoo-neo-basic.dtb; fi; " \
 		"if test $board_name = BASICKS; then " \
-			"setenv fdt_file imx6sx-udoo-neo-basic.dtb; fi; " \
+			"setenv fdtfile imx6sx-udoo-neo-basic.dtb; fi; " \
 		"if test $board_name = FULL; then " \
-			"setenv fdt_file imx6sx-udoo-neo-full.dtb; fi; " \
+			"setenv fdtfile imx6sx-udoo-neo-full.dtb; fi; " \
 		"if test $board_name = EXTENDED; then " \
-			"setenv fdt_file imx6sx-udoo-neo-extended.dtb; fi; " \
-		"if test $fdt_file = UNDEFINED; then " \
-			"echo WARNING: Could not determine dtb to use; fi; \0" \
+			"setenv fdtfile imx6sx-udoo-neo-extended.dtb; fi; " \
+		"if test $fdtfile = UNDEFINED; then " \
+			"echo WARNING: Could not determine dtb to use; fi\0" \
 	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
 	"pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
 	"ramdisk_addr_r=0x83000000\0" \
-	"ramdiskaddr=0x83000000\0" \
 	"scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
 	BOOTENV
 
 #define BOOT_TARGET_DEVICES(func) \
-	func(MMC, mmc, 0)
+	func(MMC, mmc, 0) \
+	func(DHCP, dhcp, na)
 
 #define CONFIG_BOOTCOMMAND \
 	"run findfdt; " \
@@ -91,4 +87,33 @@
 #define CONFIG_ENV_SIZE			SZ_8K
 #define CONFIG_ENV_IS_IN_MMC
 
+#define CONFIG_IMX_THERMAL
+
+/* I2C configs */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1
+#define CONFIG_SYS_I2C_SPEED		100000
+
+/* PMIC */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_PFUZE3000
+#define CONFIG_POWER_PFUZE3000_I2C_ADDR	0x08
+#define PFUZE3000_I2C_BUS	0
+
+/* Network */
+#define CONFIG_FEC_MXC
+#define CONFIG_MII
+
+#define CONFIG_FEC_ENET_DEV 0
+#define IMX_FEC_BASE			ENET_BASE_ADDR
+#define CONFIG_FEC_MXC_PHYADDR          0x0
+
+#define CONFIG_FEC_XCV_TYPE             RMII
+#define CONFIG_ETHPRIME                 "FEC0"
+
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_MICREL
+
 #endif				/* __CONFIG_H */