X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fudoo.h;h=8af5151c503d65ce6bd00e523b8cf8249693700d;hb=6cc04547cb3bbd3a3d78947f200acbae19e3c67f;hp=23bdff3348c3e8dfb6ec1d07fb78812248825d24;hpb=e8f80a5a58c9b506453cc0780687e8ed457d30a6;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/udoo.h b/include/configs/udoo.h
index 23bdff3..8af5151 100644
--- a/include/configs/udoo.h
+++ b/include/configs/udoo.h
@@ -12,152 +12,49 @@
 
 #include "imx6_spl.h"
 
-/* Provide the MACH_TYPE value that the vendor kernel requires. */
-#define CONFIG_MACH_TYPE		4800
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(2 * SZ_1M)
-
-#define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE		UART2_BASE
 
-/* SATA Configs */
-
-#ifdef CONFIG_CMD_SATA
-#define CONFIG_SYS_SATA_MAX_DEVICE	1
-#define CONFIG_DWC_AHSATA_PORT_ID	0
-#define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
-#define CONFIG_LBA48
-#endif
-
-/* Network support */
-
-#define CONFIG_FEC_MXC
-#define CONFIG_MII
-#define IMX_FEC_BASE                    ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE             RGMII
-#define CONFIG_ETHPRIME                 "FEC"
-#define CONFIG_FEC_MXC_PHYADDR          6
-
-#define CONFIG_SYS_MEMTEST_START	0x10000000
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
-
 /* MMC Configuration */
-#define CONFIG_SYS_FSL_ESDHC_ADDR	0
+#define CFG_SYS_FSL_ESDHC_ADDR	0
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
-	"script=boot.scr\0" \
-	"image=zImage\0" \
-	"console=ttymxc1\0" \
-	"splashpos=m,m\0" \
+	"console=ttymxc1,115200\0" \
 	"fdt_high=0xffffffff\0" \
 	"initrd_high=0xffffffff\0" \
-	"fdt_file=undefined\0" \
+	"fdtfile=undefined\0" \
 	"fdt_addr=0x18000000\0" \
-	"boot_fdt=try\0" \
+	"fdt_addr_r=0x18000000\0" \
 	"ip_dyn=yes\0" \
-	"mmcdev=0\0" \
-	"mmcpart=1\0" \
-	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
-	"update_sd_firmware_filename=u-boot.imx\0" \
-	"update_sd_firmware=" \
-		"if test ${ip_dyn} = yes; then " \
-			"setenv get_cmd dhcp; " \
-		"else " \
-			"setenv get_cmd tftp; " \
-		"fi; " \
-		"if mmc dev ${mmcdev}; then "	\
-			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
-				"setexpr fw_sz ${filesize} / 0x200; " \
-				"setexpr fw_sz ${fw_sz} + 1; "	\
-				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
-			"fi; "	\
-		"fi\0" \
-	"mmcargs=setenv bootargs console=${console},${baudrate} " \
-		"root=${mmcroot}\0" \
-	"loadbootscript=" \
-		"load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
-	"bootscript=echo Running bootscript from mmc ...; " \
-		"source\0" \
-	"loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
-	"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
-	"mmcboot=echo Booting from mmc ...; " \
-		"run mmcargs; " \
-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if run loadfdt; then " \
-				"bootz ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"if test ${boot_fdt} = try; then " \
-					"bootz; " \
-				"else " \
-					"echo WARN: Cannot load the DT; " \
-				"fi; " \
-			"fi; " \
-		"else " \
-			"bootz; " \
-		"fi;\0" \
-	"netargs=setenv bootargs console=${console},${baudrate} " \
-		"root=/dev/nfs " \
-	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
-		"netboot=echo Booting from net ...; " \
-		"run netargs; " \
-		"if test ${ip_dyn} = yes; then " \
-			"setenv get_cmd dhcp; " \
-		"else " \
-			"setenv get_cmd tftp; " \
-		"fi; " \
-		"${get_cmd} ${image}; " \
-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
-				"bootz ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"if test ${boot_fdt} = try; then " \
-					"bootz; " \
-				"else " \
-					"echo WARN: Cannot load the DT; " \
-				"fi; " \
-			"fi; " \
-		"else " \
-			"bootz; " \
-		"fi;\0" \
-		"findfdt=" \
-			"if test $board_rev = MX6Q ; then " \
-				"setenv fdt_file imx6q-udoo.dtb; fi; " \
-			"if test $board_rev = MX6DL ; then " \
-				"setenv fdt_file imx6dl-udoo.dtb; fi; " \
-			"if test $fdt_file = undefined; then " \
-				"echo WARNING: Could not determine dtb to use; fi; \0"
-
-#define CONFIG_BOOTCOMMAND \
-	   "run findfdt; " \
-	   "mmc dev ${mmcdev}; if mmc rescan; then " \
-		   "if run loadbootscript; then " \
-			   "run bootscript; " \
-		   "else " \
-			   "if run loadimage; then " \
-				   "run mmcboot; " \
-			   "else run netboot; " \
-			   "fi; " \
-		   "fi; " \
-	   "else run netboot; fi"
+	"mmcdev=2\0" \
+	"mmcrootfstype=ext4\0" \
+	"findfdt="\
+		"if test ${board_rev} = MX6Q; then " \
+			"setenv fdtfile imx6q-udoo.dtb; fi; " \
+		"if test ${board_rev} = MX6DL; then " \
+			"setenv fdtfile imx6dl-udoo.dtb; fi; " \
+		"if test ${fdtfile} = undefined; then " \
+			"echo WARNING: Could not determine dtb to use; fi\0" \
+	"kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+	"pxefile_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+	"ramdisk_addr_r=0x13000000\0" \
+	"scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+	BOOTENV
+
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 2) \
+	func(SATA, sata, 0) \
+	func(DHCP, dhcp, na)
+
+#include <config_distro_bootcmd.h>
+#include <linux/stringify.h>
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
 
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
 
-#define CONFIG_SYS_INIT_SP_OFFSET \
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
 /* Environment organization */
-#define CONFIG_ENV_SIZE			(8 * 1024)
-
-#define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
-#define CONFIG_SYS_MMC_ENV_DEV		0
 
 #endif			       /* __CONFIG_H * */