X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fudoo.h;h=3378b4a601c49f285fa74aa0e282370f5cb28de0;hb=d01806a8fcbdaedcc67cead56ece572021d97ab7;hp=90b682e1009b24bffae6fe8309e3a1c646916f6f;hpb=cd7b634413ea25838185db2faffc313d4d571fa9;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/udoo.h b/include/configs/udoo.h
index 90b682e..3378b4a 100644
--- a/include/configs/udoo.h
+++ b/include/configs/udoo.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2013 Freescale Semiconductor, Inc.
  *
  * Configuration settings for Udoo board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -24,30 +23,20 @@
 
 /* SATA Configs */
 
-#define CONFIG_CMD_SATA
 #ifdef CONFIG_CMD_SATA
-#define CONFIG_DWC_AHSATA
 #define CONFIG_SYS_SATA_MAX_DEVICE	1
 #define CONFIG_DWC_AHSATA_PORT_ID	0
 #define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
 #define CONFIG_LBA48
-#define CONFIG_LIBATA
 #endif
 
 /* Network support */
 
 #define CONFIG_FEC_MXC
-#define CONFIG_MII
 #define IMX_FEC_BASE                    ENET_BASE_ADDR
 #define CONFIG_FEC_XCV_TYPE             RGMII
 #define CONFIG_ETHPRIME                 "FEC"
 #define CONFIG_FEC_MXC_PHYADDR          6
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_MICREL
-#define CONFIG_PHY_MICREL_KSZ9031
-
-/* Command definition */
-#define CONFIG_CMD_BMODE
 
 #define CONFIG_SYS_MEMTEST_START	0x10000000
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
@@ -55,109 +44,37 @@
 /* MMC Configuration */
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
 #define CONFIG_EXTRA_ENV_SETTINGS \
-	"script=boot.scr\0" \
-	"image=zImage\0" \
-	"console=ttymxc1\0" \
-	"splashpos=m,m\0" \
+	"console=ttymxc1,115200\0" \
 	"fdt_high=0xffffffff\0" \
 	"initrd_high=0xffffffff\0" \
-	"fdt_file=undefined\0" \
+	"fdtfile=undefined\0" \
 	"fdt_addr=0x18000000\0" \
-	"boot_fdt=try\0" \
+	"fdt_addr_r=0x18000000\0" \
 	"ip_dyn=yes\0" \
 	"mmcdev=0\0" \
-	"mmcpart=1\0" \
-	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
-	"update_sd_firmware_filename=u-boot.imx\0" \
-	"update_sd_firmware=" \
-		"if test ${ip_dyn} = yes; then " \
-			"setenv get_cmd dhcp; " \
-		"else " \
-			"setenv get_cmd tftp; " \
-		"fi; " \
-		"if mmc dev ${mmcdev}; then "	\
-			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
-				"setexpr fw_sz ${filesize} / 0x200; " \
-				"setexpr fw_sz ${fw_sz} + 1; "	\
-				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
-			"fi; "	\
-		"fi\0" \
-	"mmcargs=setenv bootargs console=${console},${baudrate} " \
-		"root=${mmcroot}\0" \
-	"loadbootscript=" \
-		"load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
-	"bootscript=echo Running bootscript from mmc ...; " \
-		"source\0" \
-	"loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
-	"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
-	"mmcboot=echo Booting from mmc ...; " \
-		"run mmcargs; " \
-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if run loadfdt; then " \
-				"bootz ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"if test ${boot_fdt} = try; then " \
-					"bootz; " \
-				"else " \
-					"echo WARN: Cannot load the DT; " \
-				"fi; " \
-			"fi; " \
-		"else " \
-			"bootz; " \
-		"fi;\0" \
-	"netargs=setenv bootargs console=${console},${baudrate} " \
-		"root=/dev/nfs " \
-	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
-		"netboot=echo Booting from net ...; " \
-		"run netargs; " \
-		"if test ${ip_dyn} = yes; then " \
-			"setenv get_cmd dhcp; " \
-		"else " \
-			"setenv get_cmd tftp; " \
-		"fi; " \
-		"${get_cmd} ${image}; " \
-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
-				"bootz ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"if test ${boot_fdt} = try; then " \
-					"bootz; " \
-				"else " \
-					"echo WARN: Cannot load the DT; " \
-				"fi; " \
-			"fi; " \
-		"else " \
-			"bootz; " \
-		"fi;\0" \
-		"findfdt=" \
-			"if test $board_rev = MX6Q ; then " \
-				"setenv fdt_file imx6q-udoo.dtb; fi; " \
-			"if test $board_rev = MX6DL ; then " \
-				"setenv fdt_file imx6dl-udoo.dtb; fi; " \
-			"if test $fdt_file = undefined; then " \
-				"echo WARNING: Could not determine dtb to use; fi; \0"
-
-#define CONFIG_BOOTCOMMAND \
-	   "run findfdt; " \
-	   "mmc dev ${mmcdev}; if mmc rescan; then " \
-		   "if run loadbootscript; then " \
-			   "run bootscript; " \
-		   "else " \
-			   "if run loadimage; then " \
-				   "run mmcboot; " \
-			   "else run netboot; " \
-			   "fi; " \
-		   "fi; " \
-	   "else run netboot; fi"
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+	"mmcrootfstype=ext4\0" \
+	"findfdt="\
+		"if test ${board_rev} = MX6Q; then " \
+			"setenv fdtfile imx6q-udoo.dtb; fi; " \
+		"if test ${board_rev} = MX6DL; then " \
+			"setenv fdtfile imx6dl-udoo.dtb; fi; " \
+		"if test ${fdtfile} = undefined; then " \
+			"echo WARNING: Could not determine dtb to use; fi\0" \
+	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
+	"pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
+	"ramdisk_addr_r=0x13000000\0" \
+	"scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
+	BOOTENV
+
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0) \
+	func(SATA, sata, 0) \
+	func(DHCP, dhcp, na)
+
+#include <config_distro_bootcmd.h>
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
 
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
@@ -172,7 +89,6 @@
 /* Environment organization */
 #define CONFIG_ENV_SIZE			(8 * 1024)
 
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
 #define CONFIG_SYS_MMC_ENV_DEV		0