X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fudoo.h;h=268c737e7eb7fcc19db4bfa61727d19735b0bcc8;hb=aec118ebe63f7f0ab60916f9906fb3cb680abf7a;hp=3378b4a601c49f285fa74aa0e282370f5cb28de0;hpb=cf033e04da315ba949e804c127abae0134bda30f;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/udoo.h b/include/configs/udoo.h
index 3378b4a..268c737 100644
--- a/include/configs/udoo.h
+++ b/include/configs/udoo.h
@@ -10,39 +10,10 @@
 
 #include "mx6_common.h"
 
-#include "imx6_spl.h"
-
-/* Provide the MACH_TYPE value that the vendor kernel requires. */
-#define CONFIG_MACH_TYPE		4800
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(2 * SZ_1M)
-
-#define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE		UART2_BASE
 
-/* SATA Configs */
-
-#ifdef CONFIG_CMD_SATA
-#define CONFIG_SYS_SATA_MAX_DEVICE	1
-#define CONFIG_DWC_AHSATA_PORT_ID	0
-#define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
-#define CONFIG_LBA48
-#endif
-
-/* Network support */
-
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE                    ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE             RGMII
-#define CONFIG_ETHPRIME                 "FEC"
-#define CONFIG_FEC_MXC_PHYADDR          6
-
-#define CONFIG_SYS_MEMTEST_START	0x10000000
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
-
 /* MMC Configuration */
-#define CONFIG_SYS_FSL_ESDHC_ADDR	0
+#define CFG_SYS_FSL_ESDHC_ADDR	0
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"console=ttymxc1,115200\0" \
@@ -52,7 +23,7 @@
 	"fdt_addr=0x18000000\0" \
 	"fdt_addr_r=0x18000000\0" \
 	"ip_dyn=yes\0" \
-	"mmcdev=0\0" \
+	"mmcdev=2\0" \
 	"mmcrootfstype=ext4\0" \
 	"findfdt="\
 		"if test ${board_rev} = MX6Q; then " \
@@ -61,18 +32,19 @@
 			"setenv fdtfile imx6dl-udoo.dtb; fi; " \
 		"if test ${fdtfile} = undefined; then " \
 			"echo WARNING: Could not determine dtb to use; fi\0" \
-	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
-	"pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
+	"kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+	"pxefile_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
 	"ramdisk_addr_r=0x13000000\0" \
-	"scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
+	"scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
 	BOOTENV
 
 #define BOOT_TARGET_DEVICES(func) \
-	func(MMC, mmc, 0) \
+	func(MMC, mmc, 2) \
 	func(SATA, sata, 0) \
 	func(DHCP, dhcp, na)
 
 #include <config_distro_bootcmd.h>
+#include <linux/stringify.h>
 
 /* Physical Memory Map */
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
@@ -81,15 +53,6 @@
 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
 
-#define CONFIG_SYS_INIT_SP_OFFSET \
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
 /* Environment organization */
-#define CONFIG_ENV_SIZE			(8 * 1024)
-
-#define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
-#define CONFIG_SYS_MMC_ENV_DEV		0
 
 #endif			       /* __CONFIG_H * */